After some inspection, no problems were found, and even radiographic flaw detection was used, and after the inspection, when Li Zhao told Deputy Director An about the situation, Li Zhao obviously felt that he was relieved. It's understandable to think about it, after all, at this time, it directly skipped the historical 30-ton equipment, and directly changed it to the 100-ton level, and at the same time added the converter of bottom blowing, it is normal to have no confidence, and if you don't take it to heart at all, it is abnormal.

At this time, Deputy Director An was already full of smiles and said, "It's okay, it's okay, the construction of the plant is still a little worse, and we can only wait for the temperature to rise next month, and it is estimated that it will be completed by the end of March for testing."

Looking at the deputy director of An, who was already relaxed, Li Zhao also understood the reason why he just spoke a little strangely, it should be more anxious, if he was very sure, he would not have pulled him to test the equipment so early, after all, at this time, there is still a short time before the real installation of equipment, calling Li Zhao so early, it is estimated that the more he thinks about it, the more he feels bottomless, and looking for Li Zhao to come over is to increase his confidence.

It is important to know that the converter with top and bottom blowing actually appeared quite late, basically the earliest attempts were ten years later, this technology is good for a large number of steelmaking, can increase the flow of molten iron, so as to make the composition of the steel more uniform. But for Deputy Director An, the span is a bit too big, if he follows his own ideas, he may copy Da Mao's fifty-ton level, but that is not what Li Zhao wants.

After all, Li Zhao is sure to get the top and bottom reblowing converter, after all, he has seen this kind of converter, there is no need to go back to the old road, since there is a good one, of course it is good. Of course, Li Zhao didn't blindly go to a bigger converter, after all, this was enough.

Bidding farewell to Deputy Director An, Li Zhao went to Su's father's office again, found out the newspaper, and sure enough, in the inconspicuous position of the newspaper, reported the situation of the machine tool, but the factory that produced the machine tool was not the 998 factory, but a newly established factory specializing in the production of machine tools. It does not mention how the machine tool came about, but only said that the advanced nature of the machine tool has reached how advanced it is, which can attract all the ill-intentioned eyes.

After reading it, Li Zhao and Su's father said, "Have you seen this report? Are you ready to export? I remember that when I first started, I was going to keep it secret for a while, but now it's kind of a release."

Seeing the report pointed by Li Zhao, Father Su said, "It's ready to be exported, and I have already got the news, but for the time being, due to the huge domestic demand, it is estimated that it will be delayed for a while. And it also depends on our own CNC machine tool production capacity, the superiors hope that some factories can install CNC machine tools, but our current production capacity is too low."

Li Zhao is also helpless, after all, the chips are now produced in the laboratory, and if you want to directly build a chip production plant, there is still a little bit of power, and if you want to use those machines to produce qualified chips, it is not something that can be completed by training some workers casually, and under the current situation, it can only be produced in small batches in the laboratory.

After thinking about it, Li Zhao said: "It is not possible for the time being, at the current speed, it is estimated that only a few CNC machine tools can be produced every month, and if you want to achieve mass production, it is estimated that the laboratory needs to completely open up the entire process of chip production and come up with a mature production process, otherwise it is difficult to mass production."

After hearing this, Father Su also sighed and said, "In this case, we have only solved the problem of whether we have or not, even if we use it ourselves, it is seriously insufficient. In this case, if we really open the door to export, the domestic supply of machine tools will probably be even more scarce."

It is really difficult to choose for this situation, there are not many factories in China that can produce new machine tools, and it is really very difficult to raise the production capacity all at once. At present, the 998 factory is the factory with the largest production capacity among all the factories, but even so, it is still far from enough to supply the domestic demand, even if it is produced at the maximum capacity of the 998 factory, it will take several years to meet the domestic demand.

And the formation of a new factory, and the 998 factory is facing the same problem, lack of heritage, and they will be more serious than the 998 factory, after all, the 998 factory still has several research institutes, the technology is not up to the level and there are people to guide, even if the research institute can't do it, and Li Zhao, the designer

, but not in other factories.

However, even if this is the case, Li Zhao still feels that it needs to be exported, at this time, if the export scale can rise, then the 998 factory will be able to gain a firm foothold in the future, not to mention, when a factory has used a certain machine for a period of time, and feels that it is very good, they are very likely to purchase this machine's machine again.

Li Zhao also said at this time: "Even if our current production capacity is insufficient, we still have to find a way to export, as for how to balance domestic and foreign demand, this can be decided by the superiors, we can do a good job in production, and come up with as many machine tools as possible." Now the factory has begun to arrange a new CNC machine tool workshop, and the selection of personnel is also going smoothly, we need to accumulate CNC machine tools at the same time, the production capacity of ordinary machine tools soars."

Seeing Li Zhao so insistent, Su's father could only support it, although he didn't understand why Li Zhao attached so much importance to exports, after all, in his opinion, it was still necessary to focus on the country. But how did he know that domestic demand alone could not support industrial development at all, after all, the gross domestic product was too low, and more than half of the people were below the extreme poverty line, and only a small number of people could eat enough.

Now Li Zhao is ready to walk directly on two legs, and he is preparing to vigorously develop agriculture in China, so that the vast majority of the rural population has purchasing power, so that it can provide impetus for the development of general living products, and eventually drive the development of textiles, home appliances, machinery, and so on. The demand of foreign markets can be regarded as a leg, and what Li Zhao wants to export is actually those items that cannot be consumed in China now, such as cars and the like.

Only in this way can the country's development not fall too far behind and finally achieve national rejuvenation. Thinking of this, Li Zhao became even more determined and said: "I estimate that Da Mao will be interested first, if Nastya proposes to visit, should we take her to see the production and assembly of machine tools, after all, they know the strength of our machine tools, and we have sold several waves of machine tool transformation plans to them."

Listening to Li Zhao's words, Su's father said in a deep voice: "It's better for you not to get involved in this matter, if they want to visit, it's best to let them go through the formal way, we will take them to visit directly, a little suspicious of leaking, and I estimate that the export to the outside world in the future will be dominated by the factory in the newspaper, and some of our machine tools will ask to use their nameplates in the future, which is also because the superiors don't want to expose us."

Li Zhao nodded and said: "Well, if she asks me, I will directly let them go through the formal way, the first few times I sold the machine tool transformation plan, it was also operated like this, and the price was directly negotiated by the superiors, I don't know what I talked about, but I know that the first few times, the price seems to be quite large, and I have made a lot of money."

After chatting with Su's father for a while, Li Zhao went to see Su Ya's situation again, chatted with her for a while, and went to work with his affairs. But as expected, when Li Zhao came home in the evening and was cooking, Nastya came over directly, and when she saw Li Zhao, she asked directly, "Do you know the machine tool factory in the newspaper?"

When Li Zhao heard this, he said, "Are you talking about the one reported today? I really don't know about that machinery factory, I haven't dealt with it, do you ambassadors want to buy machine tools? If that's the case, it's best to get in touch as soon as possible."

Nastya was a little puzzled and asked: "This is very simple, if the machine tool is really so good, our domestic demand is very large, as far as I estimate, the domestic demand for machine tools is more than tens of thousands of units per year, you said that with the situation of our domestic machine tool factory, which factory can provide so many machine tools, it is estimated that the orders from the superior have not known how many years later, and it is really impossible to arrange it late."

At this time, Nastya looked at Li Zhao with a suspicious expression and asked, "Say, do you know anything?" When I usually talk to Su Ya about the content of the newspaper, you have never interjected, obviously you don't usually read the newspaper, today I said that you actually knew directly, this machine tool will not be designed by you, right? Our ambassador would like to visit the machine and see how your production is going, so you can see and help get in touch."

Li Zhao looked surprised, but it seemed like this, he usually didn't read the newspaper much, after all, he didn't have enough time, and he could only quibble at this time, so he said, "I listened to what Deputy Director An said, and then I found a newspaper

If you look at the door, you will know this, and if you don't believe it, you can talk about the rest, I am sure I don't know."

What Li Zhao said was the truth, but how easy it was for a person to pretend not to know, how could Li Zhao's words dispel Nastya's suspicions? She was originally looking for Li Zhao to inquire about the news of the factory, but Li Zhao's answer was too easy to suspect, and now Li Zhao's words are full of loopholes, where can Nastya not be suspicious?