Chen Jie, Li Yun, and the two engineers were really frightened by his words.

When did we have these in Huaxia?

If there were, it wouldn't be so humble as an island nation.

In the factory building more than 20 meters high, there are overpasses across it.

They are walking on the overpass, from top to bottom, overlooking the entire assembly line.

The ultra-modern factory in front of them gives them a feeling of crossing time and space and coming to the future world.

This feeling is no less than that in 1896, when Li Hongzhang and others took a cruise ship to New York, USA, and saw the shock brought by cars, trams, ships, and various modern skyscrapers.

Nakano Toru also looked at them, and they all turned away in embarrassment, stalking their necks to look elsewhere.

However, this gesture of theirs made the Japanese side mistakenly think that they might really have these advanced production lines, but they just didn't want to answer.

"The Exotic Reclamation of Vegetable Skeletons"

Chen Weidong muttered in his mouth: "Mr. Sanders of Siemens, the production line he sold us is much stronger than yours, and the supporting robotic arm is not only very soft to grasp, but also has infrared positioning function, and their ultra-high precision motor ......"

He spoke as if talking to himself, which made Nakano Tetsuya and others gasp, German Siemens is actually selling equipment to Huaxia? Or such an advanced production line?!

How is this possible?!

They simply can't believe it!

But what Chen Weidong said is eloquent and reasonable, and many things are indeed the most advanced technology in the world, and they have not even been exposed outside, which makes them have to pay attention to it.

For a while, the faces of all the personnel on the Japanese side became extremely ugly.

If this is the case, the Germans come to grab orders from them, and their plans this time may be completely in vain!

Aren't these Germans afraid of violating the Batumi ban ?!

While Chen Weidong and they were not paying attention, a staff member secretly left the team, and he wanted to contact the relevant people to investigate and see if there was such a thing, and it was best to ask the German side!

And Nakano Tetsuya and the others could only pinch their noses and take Chen Weidong and them to continue visiting, so as to delay time and find out their hole cards.

Because of longitude, there is a time difference between the island nation and Germany, which is about seven hours slower than the island nation.

At this point in time, it is estimated that it will be a while before the Germans go to work.

This time, the Japanese side is embarrassed to continue to show them the assembly line, in case they are repeatedly said to be in tatters, they will lose face!

A group of people entered the machining workshop, where it was bright and spacious, rows of CNC machine tools, neatly placed, and several machines were engaged in metal processing.

A high-alloy cutter is clamped on the worktable, and under the high-speed rotation of the spindle, the iron is sharpened like mud, and a large number of iron filings fall off like cutting tofu, which is very ornamental.

It can be seen that the development of industry to a certain extent can already be described by the word "art".

Soon, the main event came.

A Japanese officer led them to a corner and raised his voice to introduce:

"Ladies and gentlemen, this is the latest five-axis linkage CNC machine tool produced by our island country, and the production accuracy can reach 0.005mm!"

This machine has met the standards of the Paris Coordinating Committee, which prohibits the export of cutting-edge technology products to China.

Even if it is secretly sold to Huaxia, it must be equipped with a satellite locator on it, and it is forbidden to move it after it is placed in the factory.

Even if the machine fails, not a single screw can be unscrewed, and someone must be sent from the island country to repair it.

"It's... It turned out to be a five-axis machine! ”

Zhao Gong and Xie Gong looked at the machine in front of them and let out a low snort.

Five-axis linkage CNC machine tool is a machine tool with high technology content and high precision, which is specially used for processing complex curved surfaces.

It is also the only means to solve the processing of impellers, blades, marine propellers, heavy-duty generator rotors, steam turbine rotors, large diesel engine crankshafts, etc.!

It represents the highest level of machine tool manufacturing, in a sense, it reflects the level of industrial development of a country, that is, the "industrial machine"!

At present, Huaxia has not yet been able to manufacture five-axis machine tools, and even the machining accuracy has not broken through the 0.010mm mark!

And the machine tool in front of you is directly twice as accurate as theirs!

Several island people are very satisfied with their expressions, and they are all stunned, this is the high-end CNC machine tool in service in our island country, even if it is in their factory, there are not many units.

Zhao Gong and Xie Gong couldn't take their eyes off, and frantically hinted that Chen Weidong could buy this, compared with the current domestic machine tools, it is too advanced!

However, Chen Weidong shook his head again and said: "This level is just average, although your "Fanuc" system is good, but the operation requirements for workers are too high, not as good as the German Siemens system, simple and easy to use. ”

He really didn't say nonsense, the reason why he knew so much mechanical knowledge was entirely because of later generations, he had eaten with the president of the Yiwu Mould Association and other industry elders.

He still remembers which country's knives are durable and advanced, and which country's machine tools use what system.

This five-axis machine tool can be regarded as an "industrial machine tool" for Huaxia at present, but Chen Weidong knows that this is not the most advanced machine tool in the island country!

The people in the island country didn't expect Chen Weidong to be so tricky, and he would say that their products were not good on the CNC system, which made them speechless.

Toru Nakano was silent for a while, and said, "Chen Jun! Although our system is a little more complicated, but our machine tool is more in line with the use of your Huaxia power grid standards, only need to use three-phase electricity, 380V voltage can drive this machine, which the Germans can not do! ”

"What's more, we can guarantee that our" Fanuc "system is definitely more stable than the Siemens system of the Germans, and there will be no crashes and loss of codes! ”

As a China expert, he naturally understands the situation in China very well, including their domestic power grid standards, and even industrial electricity consumption!

Of course it's top secret!

So he believes that as long as Chen Weidong is not stupid, he will definitely choose to buy their machine!

The so-called shortcomings are just a reason to bargain.

Huaxia people like to do this the most, will he still not understand this?

Chen Weidong touched his nose, and didn't know how to break the situation for a while, these island people are really too shrewd.

This five-axis machine tool is estimated to be the limit of what they can sell.

Zhao Gong, Xie Gong and others, standing next to them, did not dare to speak, they were all waiting for him to make a decision.

From the perspective of psychological factors, they want this machine very much, if they can bring it back to China, how many precision machine tools can be produced.

At least, it can also push the domestic manufacturing level forward for seven or eight years!

But it was Chen Weidong who paid the money, and they only had to assist him, as for whether to buy it or not, it depended on his intentions.

"Mr. Nakano, how much do you sell this machine?"

Chen Weidong thought for a while, and planned to ask the price first, if the price was really right, he didn't mind buying more of this one.

Several islanders chattered, got together and discussed for a while, and then said a few words in Nakano's ear.

Toru Nakano also smiled and replied: "Chen Jun, in view of our friendly relations, our machine tool will be sold to you cheaply, only 400 million US dollars!" ”

"I'll wipe it, why don't you go and grab it!?"

When Chen Jie heard this price, he immediately scolded.

He has done some homework on the price of these machine tools, but he didn't expect the other party to open his mouth and open his mouth to be 400 million US dollars!

According to the current exchange rate, it is equivalent to more than 3 billion RMB!

Bookmark