Half a month later, nine of the ten sample off-road pickup trucks were driven away.

As the director of the No. 3 Machinery Factory, Zhao Guozhu left himself an off-road pickup truck.

His car was flawed with its size, and now that he had produced an off-road pickup truck, there was no reason not to keep one for himself.

That morning, Fang Yuan received a certificate of merit, three certificates, two letters of appointment, and a pistol.

The position level was promoted to the director, the technical level was promoted to the top engineer, and the position in the factory remained the same, and he was still the deputy director.

One hundred and fifteen per month for the director, two hundred and one per month for the top engineer, and thirty-five per month for the deputy factory director.

The sum of the three salaries is as high as 395 yuan per month.

After developing and manufacturing a car, it is normal to rise to the top engineer in terms of technical level, and it is reasonable to be promoted to chief engineer.

The rank of the post was promoted from section chief to section chief, which was a full increase of two levels, and the greatest credit came from a few foreigners.

There were many Sioux people in the northern capital, and a few people from other countries.

Seeing the off-road pickup truck, several Soviet people wanted to experience it, but those present at the time had to agree.

The off-road pickup truck is powerful, super fast, and smooth, which makes the people of the Soviet Union unbelievable......

Fang Yuan talked to Zhao Guozhu, Li Yong, Zhou Yi, and Zhang Dong about recruiting workers in the engine workshop.

For the workers in the engine workshop, he plans to select 50 people in the factory, and then recruit some junior high school students, high school students, and college students.

Most of the parts of the machinery and equipment needed in the workshop have been made, and it takes time to recruit and train.

Thanks to Sanfang motorcycles and Sanfang pickup trucks, factory director Zhao Guozhu, deputy factory director Li Yong, deputy factory director Zhou Yi, and deputy factory director Zhang Dong have all been promoted by half a level, and the third machinery factory has also been upgraded by one level.

According to the current rank of the Third Machinery Factory, there is still room for promotion in the rank of the people.

At the end of the meeting, the crowd began to chat.

Zhao Guozhu said with a smile: "Director Fang, you are not too young, how are you thinking about lifelong events?" ”

"I didn't meet the right one." Fang Yuan did a tai chi.

"I know that Director Fang must be looking for someone who is both talented and good-looking." Zhou Yi teased.

Fang Yuan was silent, he was still hesitating whether to find a partner or not.

There are too few recreational activities, and having a partner will not be lonely and sleepless.

There were many people who introduced him to the object, and after Fang Yuan saw the photo, he refused on the spot.

After going to the cafeteria for lunch together, Fang Yuan returned to the office and wrote lathes and grinders...... Drill machine operation manual.

The machine tools he designed can be upgraded to CNC machine tools in the future.

Lathes, grinders, drilling machines, punching machines, etc., are collectively referred to as machine tools.

The engine workshop planned by Fang Yuan now lives up to its name, but it will not live up to its name in the future.

He planned to start with the engine workshop and build a smelting workshop in the name of the engine workshop in the future......

"The Ronin Who Started from Douluo"

It looks like a workshop, but in fact it is no different from a factory.

If the raw materials cannot meet the demand, it becomes a matter of course to build a smelting workshop or smelter.

When there is overcapacity in the workshop, can you do something else?

At present, planned production is implemented, and after the plan is completed, as long as the produced things can make money, they can produce as much as they want.

At around three o'clock in the afternoon, Fang Yuan left the office and went to go around the workshops.

Sometimes he watched the workers at work, and sometimes he chatted with the workers.

Fifty workers were selected in the factory, and he needed to know the technical ability and conduct of each other.

When it was time to get off work, Fang Yuan went back to the office and took the operation manual he had written.

Return to the courtyard, cook by yourself, eat and bathe, and throw your clothes into the washing machine......

On Friday morning, Fang Yuan drove an off-road pickup truck to Beidu University of Technology.

When he entered the school, he made a guest appearance as an examiner, and asked the students who participated in the application to do a test paper.

Not many students participated in the application, only about 120 in total.

Students who are still studying, under normal circumstances, who would want to leave the campus?

When you graduate from university, you can choose a job, and the minimum entry is a first-class assistant engineer.

The salary of the first-class assistant engineer of the No. 3 Machinery Factory is the same as that of the fourth-level technician, fifty-four yuan per month.

The treatment provided by Fang Yuan is fifty-four yuan per month, and the salary seems to be a lot, but the position is not an assistant engineer.

At the end of the written test and after grading, Fang Yuan began the interview, and eighteen students were selected among the best.

In the next few days, Fang Yuan drove an off-road pickup truck to schools.

When the grades are equal, if there are not enough places, he hires the children of military personnel.

"Twenty-eight college students, sixty-five high school students, one hundred and twenty-seven junior high school graduates, plus fifty workers in the factory, two hundred and seventy people, is almost enough."

At eight o'clock on Monday morning, those who passed the interview gathered outside the gate of the Third Machinery Factory.

The engine workshop, in addition to workshops, warehouses, etc., also has five dormitory buildings.

Each dormitory building has 60 small apartments, each house has two bedrooms, one living room, one kitchen and one bathroom, one bedroom for one employee, and five dormitory buildings can accommodate 600 employees.

After confirming that it was correct, Fang Yuan issued an operation manual and asked the security department to give military training to new employees for three months.

The people in the security section are almost all retired soldiers, and the equipment of the security section includes pistols, assault rifles, and mortars.

In the warehouses of many towns and villages, there are still a lot of guns and ammunition, and many people still have souvenirs at home.

The parts of various machine tools were made one after another, and Fang Yuan fell into busyness.

During his time at work, he either assembles the machine himself or directs the workers to assemble the machine.

A brand new machine tool appeared in the engine shop.

At the end of the military training for new employees, all the machine tools in the engine shop are installed.

In three months, the 50 workers transferred from the factory, as well as the new employees who signed the sign, have mastered the theory of machine tool control with the help of the machine tool operation manual.

Fang Yuan made a cameo appearance as a teacher, and the employees of the engine workshop learned and used it at the same time, and a month later, the engine workshop was on the right track.

Raw materials and parts go into the engine shop, and when they go out, they become motorcycle engines, car engines, car gearboxes, and the like.

Zhang Xinhua, who led the team to visit, looked at the orderly and spotless engine workshop, and was shocked inexplicably.

Such an advanced workshop surprised and delighted the people who came to visit.

"How accurate can this lathe be?"

"The highest machining accuracy is 10 microns, which is 1 filament."

"This lathe is so accurate?"

"Lathes, grinders...... The machining accuracy of the drilling machine is 10 microns. ”

"With these high-precision machines, the role of the fitter becomes smaller."

"Some parts with unique shapes still need fitters."

"That machine is a five-axis machine?"

"Well, it's a five-axis linkage machine, the most technical machine in the engine shop."

"You made it?"

"I made a few parts, and the rest of the parts were produced in the factory."

"Director Fang, where are the workers of that machine?"

"That machine specializes in producing a kind of part, and there is no need for workers to stare at it, and when the part is ready, they can hear the prompt and replace the material."

"It's too advanced, I'm afraid it's comparable to CNC machine tools outside the United States."

The first CNC machine tool in foreign countries, born 12 years ago, the most advanced CNC machine tool in foreign countries, many of the performance is not comparable to the upper circle design of these machine tools.

"Ping, how is the production capacity?"

"It can produce 1,500 motorcycle engines, 500 automobile engines, and 500 automobile transmissions every day."

"How much can you produce in one day?"

"A lot of machines specialize in one type of part, and it's a little bit faster."