The information released by Annihilation Technologies caused an international shock.

Originally, the production of first-order iron was in 'kilograms', because the content of first-order iron in magnetized iron materials was low, and there was a more complex extraction process in the future, and the output of first-order iron was naturally very low, so it could only be used by various scientific research institutions.

Now the 'extraction' process is skipped, and the high-purity first-order iron is produced directly, and the yield is measured in 'tons'.

The information released by Annihilation Technologies is clear, they have determined that they are producing more than 100 tons of high-purity first-order iron per day, and that "the automation process has not been completed for the time being, and there is still a lot of room for improvement".

In other words, the output of first-order iron will only be higher in the future, and it can be expected to reach '1,000 tons' and '10,000 tons'.

This means that first-order iron can be used on a large scale.

Ameriken was the most shaken.

Previously, they started a new round of confrontation with the flower planters, and also led exercises to show military strength, in order to form a tentative deterrent, the fuse was to annihilate the technology company to restrict the sale of first-order iron to the outside world, and relevant scientific research institutions could not do research without first-order iron.

Annihilation Technologies' public explanation is that the equipment will be upgraded, but their analysis believes that it is aimed at American.

Outcome......

Is it really an upcycle?

This is no longer just an upcycle, but an unknown high-end technology that has greatly increased the production of first-order iron.

"Is it really an upgrade? And it also uses completely new technology. ”

"That technology must be very high-end, and we can be sure that the content of first-order iron in magnetized iron materials is only more than 2%, how do they make materials that are more than 90% pure?"

"What the hell is that technology?"

"In principle, the strong annihilation force field can only produce magnetized materials, and the first-order iron is evenly distributed, and even after melting, it is impossible to separate ......"

"Then again......"

"Since Annihilation Technology has suspended the sale of first-order iron, it is because of the new technology that is ready for mass production. Some time ago, why did we do that? ”

"Deterrence is still very necessary."

"But we seem to be on the side of the deterrence......"

“……”

When thinking of the new stealth technology of the air-ship-2, many people were silent, their purpose was indeed to deter, but as a result, few people cared about the exercise.

Everyone is talking about the empty ship-2.

The drill can only be hastily carried out and hastily ended, and there are not even a few spectators in the symbolic performance, which is really depressing to think about.

The mass production of first-order iron is good news for many Amriken institutions, who need first-order iron for research, and mass production means that the price will be greatly reduced, and for the same amount of money, a large number of materials can be obtained for research.

A lot of people are concerned with the result, not the process, and this is especially true for first-order iron.

Because only annihilation technology companies can produce first-order iron, if other organizations want to understand the new technology, the most basic thing is to create an annihilation force field of sufficient strength, otherwise there is no point in discussing how to do it.

A lot of people are back focused on Gamov Shapley.

When Gamov Shapley learned the news, he almost jumped out of place with excitement, he had already lost faith in the Groome Lake project, and he just insisted on taking the position of project leader.

Now, there's hope again!

Annihilation Technology Co., Ltd., which produces first-order iron on a large scale, will continue to sell it internationally as normal, so that they can buy large quantities of first-order iron at a low price, and various research can continue.

Soon.

Gamov Shapley has another piece of good news.

It was a report from the European media, about the meeting between Wang Hao and Novotini, and in the process of discussing the Annihilation Force Field technology, they also talked about the Groom Lake Project.

"Professor Wang Hao believes that the Groom Lake project is very valuable."

He affirmed the research plan and once again confirmed the correctness of the annihilation force field technology for the development of advanced materials......

There is a lot of talk in the news report, which is based on Wang Hao's one-sentence comment, which can be simply understood as 'Wang Hao affirmed the Grum Lake plan'.

That's good news for Gamov Shapley.

Although Wang Hao's team and the Anti-Gravity Sex Research Center are the catch-up targets and competitors of the Grum Lake Project, anyone must admit that Wang Hao is the most authoritative figure in the Annihilation Force Field technology, and scholars in any other related fields are not qualified to be placed with him.

Wang Hao's affirmation gave Gamov Shapley more support.

Gamov Shapley also became more confident, "Wait. As long as you buy a large amount of first-order iron, the research will be smooth all the way......"

"There will be results, too!"

"It will definitely create a high-intensity annihilation force field!"

Now Gamov-Shapley's idea is no longer to catch up with the Anti-Gravity Sex Research Center, he hopes that the purpose of his research will be fruitful, in order to prove to those who are not optimistic about the plan.

It's a mindset shift.

In the past few months, Gamov-Shapley has experienced a 'low point in his life', and even many of the participants in the project have begun to be optimistic about the direction of the research.

When he goes to some meetings, he can also hear all kinds of cynicism.

Gamov-Shapley was annoyed by this.

At this moment, he was in a very happy mood, full of anticipation for the next step of research, and even wanted to shout, "Thirty years in Hedong, thirty years in Hexi......"

"Wait and see!"

……

Internationally, we are more concerned about the impact of mass production of first-order iron, and many people in China are discussing whether the new technology can be used to produce first-order lithium or first-order carbon in large quantities.

"Since it is possible to manufacture first-order iron in large quantities, it can be applied to make first-order lithium or first-order carbon."

"It's quite possible."

"If first-order lithium or first-order carbon can also be manufactured in large quantities, the upgraded materials will be more widely used......"

That, of course, is impossible.

Iron, which has its own uniqueness, is replaced by first-order lithium or first-order carbon, and the same technology may not necessarily have the same phenomenon.

The problem with first-order lithium is that the elemental properties are too active, and the production of magnetized lithium materials can only be made of compounds, not elemental lithium, and even if the relevant technology can be used, the production must be carried out in a vacuum, which is too complicated.

For first-order carbon, there are two problems, one is elemental activity and the other is melting point.

There are a lot of carbon elements in nature, but if the carbon elements are heated to a certain extent, they will definitely react with other elements.

For example, combustion.

Even with the same technology, the production of first-order carbon takes place in a vacuum.

In addition, another disadvantage of carbon that hinders production is that the melting point of elemental carbon is too high, and it is not easy to produce such a high temperature for normal production.

In short, the new technology can only be used to make first-order pure iron materials for the time being.

The large-scale production of first-order iron will lead to great progress in alloy material technology, and materials are the basis of most technologies.

Along with the trend of annihilating technology companies, the science and technology department has simultaneously started new research preparations, that is, controlled nuclear fusion technology.

This has been discussed for a long time in the science and technology department.

F-ray generation equipment is a natural vessel for nuclear fusion reactions, and it is natural to study controlled nuclear fusion technology when there is a sufficient foundation.

This technology is cutting-edge and strategic.

The planter has always been a major importer of energy, with oil, natural gas, and even coal for power generation all required to be imported in large quantities.

It makes a lot of strategic sense to have a high-end energy technology, even if it's just to make electricity, and to change the passive energy dependence environment.

In addition, controlled nuclear fusion is a clean energy source, representing the future energy technology of mankind, and there are too many benefits to research such a technology.

Of course, the study of controlled nuclear fusion is not easy.

Even now, the science and technology department has only decided to 'accumulate theoretical and technical reserves', and only after having sufficient theoretical and technical reserves will the demonstration of controlled nuclear fusion be officially started, and then the next step is to invest a lot of manpower and material resources in research.

This is only the first stage.

The first phase of the work is confidential, and only the top scholars in China have the opportunity to participate, and a team of 11 academicians and dozens of professors went to the F-ray experimental base together.

F-rays are a technology that is completely secret.

The F-ray experimental base also does not list the name of 'F-ray', and some equipment that involves high secrecy is forbidden to visit.

The target of the study was a 'controlled nuclear fission reactor'.

Of course, the nuclear fission reactor is controllable, but the technical basis of the 'controllable nuclear fission reactor' is different, and the control method is to use the strong annihilation force field and the internal anti-gravity field to create an environment that restricts the high-intensity reaction, plus other auxiliary equipment, the reaction can be firmly limited to a small area, and at the same time, reduce the reaction speed and the heat released externally.

The group of scholars is very interested in the 'controlled nuclear fission reactor'.

When everyone saw the precision equipment in the center and learned about the related technology, they couldn't help but sigh, "This is the container that controls nuclear fusion!" ”

"No wonder let's come over and see, with this vessel, coupled with the tokamak ring device, there is a perfect technology for fusion control."

"What is the maximum controllable energy intensity?"

"Is it possible to achieve power input?"

Many scholars asked about the parameters of the equipment, and after knowing the detailed information, they also discussed it in a targeted manner, "This parameter is still much worse than controlling nuclear fusion......

"Even if nuclear fusion is controlled, the energy intensity of the explosion is at least more than twenty times!"

"The internal anti-gravity field reduces the particle activity, and the outer annihilation field annihilates the energy, but there is also a limit, and it must be matched with better thermal insulation materials."

"The magnetic field restraint of this device is not done well. However, nuclear fission does not need to be controlled, and in the case of nuclear fusion, the magnetic field constraint is very important. ”

"If it is used as a vessel for nuclear fusion, the reaction channel is still designed inside......"

"External materials are also a big problem......"

“……”

There are, of course, many problems.

The research of controlled nuclear fusion is a big project, and it is still in the stage of technology accumulation.

When there is a solution to each problem and there is real investment in research, the probability of success will be greatly improved.

The group of scholars asked a lot of questions, and at the same time, they all felt that they had gained a lot.

They also discussed it before they came, but they didn't expect the equipment to be so perfect, and they actually used only two layers of force field to restrain the nuclear reactor, which shows that the means of annihilation force field restraint is a feasible solution.

That's enough.

Some people also talked about Wang Hao, and they knew very well that the annihilation force field restraint technology must be directly related to Wang Hao's research.

"Where did Academician Wang Hao go?"

"Why isn't he there?"

Tang Jianjun said, "Academician Wang Hao is also doing related research. He hopes to solve the field force problem, that is, to create a stronger anti-gravity field and a strong annihilation force field. ”

"When the time comes, the protection will be greatly improved......"

……

Wang Hao originally planned to go to the F-ray experimental base and discuss the research direction of controlled nuclear fusion technology with the experts of the scholar group.

However, a piece of news made him change his mind.

He went to the Institute of Aeronautical Materials.

The Institute of Aeronautical Materials and Donggong Precision are responsible for the experiment of manufacturing micron-sized granular materials, and their research has made great progress, and the granular materials have been separated during the experiment.

The main leaders of this study are Cao Dongming, Qu Gui and Yang Yunhe.

Cao Dongming and Qu Gui represent the Institute of Aeronautical Materials, and the main experiment is also carried out in the Institute of Aeronautical Materials.

Yang Yunhe represents Donggong Precision, which is responsible for material cutting, processing, and providing some high-end equipment required for the experiment.

At the same time, Togong Precision's team also needs to study the manufacture of containers and agitators.

The agitator is only one part of the manufacturing process, but like the fan blades of an aero engine, the agitator is one of the components that plays the biggest role in the manufacturing process.

Now the successful manufacture of granular materials is also inseparable from Yang Yunhe's research on agitators, his team has manufactured several types of agitators, and one of the designs has played a role in successfully manufacturing granular materials.

When the granular material was successfully manufactured, Yang Yunhe was very excited and proud, and he did have the capital to be excited and proud.

The manufacturing process now, just by saying it, is amazing.

The morphological structure of granular materials is very complex, and the manufacturing process is only to melt the material and mix it with another superconducting material solution, and then use a stirrer to quickly rotate in the container, fully stir and then cool and solidify, and then obtain a material with complex properties.

"This is Nuwa's creation of man......"

Yang Yunhe sighed, "To be honest, before the research started, I didn't feel much hope. Even though Academician Wang is very confident, it doesn't sound like a technology that can be completed on the whole. ”

Cao Dongming and Qu Gui nodded together, and they felt the same way.

The technology sounded too high-end, so high-end that it didn't feel like it was real, and it turned out to be made by them.

"Although we only made a few small particles and most of them were not molded, we achieved an accumulation ...... from 0 to 1."

Yang Yunhe curled the corners of his mouth as he spoke, "Even if it's Academician Wang Hao, he can't say anything, right?" ”

"The most important thing is the design of the agitator."

"I've argued with others many times, and I think that the design of the three-layer long fan blade is the most likely to make a granular material, but I didn't expect it to be really ......."

"From 0 to 1."

"Now I'm waiting for Academician Wang Hao!"