Then, Yue Hua taught Ye Feichen several basic grips and carving methods of the carving knife. Ye Feichen accepted it quickly, and the speed made Yue Hua slightly surprised.

"Alright, follow me." After completing the basic teaching, Yue Hua beckoned to Ye Feichen and pressed an inconspicuous button next to him. The two doors next to it slowly retreated, and the interior turned out to be a very spacious space.

"This is the manufacturing room that I use a lot. Let's go inside. Yue Hua said lightly.

To be honest, Ye Feichen was still a little excited. A manufacturing room for the president of the association! Not only are there special carving things such as grinding wheels and wind stoves, but the interior decoration is also very eye-catching, and the main color of light cyan is just right to neutralize the fire of the smelting furnace and relieve fatigue.

Although the manufacturing room is extravagant, the cost must be extremely high, but you get what you pay for, whether it is carving or other in this kind of manufacturing room, the effect is definitely better than that of ordinary manufacturing rooms, and in a sense, the probability of success will be much higher.

I have to say, rich people are really happy!

This is the truest thought in Ye Feichen's heart.

"The techniques I taught you today are very simple, so I won't demonstrate them." Yue Hua's voice sounded beside him.

"See the metal on the carving table, you have to complete the task on each piece of metal."

"The first piece, the task, the straight stripe carving, thirty."

"The second piece, task, polished, pierced, thirty."

"The third piece, wave ripples, twenty-five."

"The fourth piece...

。。。。。。

"That's all for the task, you are a new soul master, your soul power may be insufficient, and if you can't complete it, you can do it again tomorrow. If the engraving process fails, and there is one on the shelf, take a new piece and do it again. ”

After arranging these tasks, Yue Hua left the manufacturing room.

He didn't deliberately embarrass Ye Feichen, he just wanted to see, no one to guide, no one to demonstrate, just based on theoretical knowledge, the rest had to be practiced by himself, under such conditions, where could he go.

Even in the future, Ye Feichen's mecha manufacturing profession has been upgraded to level five or six or even level seven or eight, this first experience and perception can still continue to inspire him.

————————————————————

Manufacturing indoors.

After getting these metals, Ye Feichen did not rush to do it, but carefully observed each piece of metal.

The first piece of metal is relatively hard but crisp, and it is not too difficult to carve straight line ripples, so it seems that Yue Hua did not deliberately make things difficult for him.

With the knowledge he had learned today, Ye Feichen quickly took down the most suitable carving knife from the shelf and placed it next to the first piece of metal.

The second, the third, the fourth...

Until the last piece, there were no problems, Ye Feichen thought for a while, and then understood everything.

After getting acquainted with it, it is natural to do it.

The straight line ripple of the first piece...

Ye Feichen held his lower forehead and slowly held the carving knife next to the first piece of metal, and then, slowly, pressed the blade against the top of the metal surface.

Carving must be slow, and there is no room for slackness.

Began to carve, Ye Feichen didn't dare to exhale, and as the carving knife swiped steadily, a straight stripe appeared on the metal.

The first victory in the division made Ye Feichen's self-confidence increase a little, and the movements in his hands were also a little faster, intentionally or unintentionally.

Half an hour later, a beautiful piece of straight-striped metal was placed on the forging table.

Ye Feichen got up slowly, let out a long breath, put the carving knife on the shelf, turned his head to look at the first piece of metal, and slowly felt a sense of accomplishment in his heart, and couldn't help but smile happily.

Yue Hua, who was sitting in the monitoring room, also smiled.

"I still know how to put it back after I use it, which is a habit that many newcomers to mecha manufacturers don't develop."

"But it's a beautiful carving! It seems that this little guy still has a certain talent. ”

Ye Feichen completed the task of the first piece of metal, but did not start to carve the next piece, but found an open space and meditated on his knees. Anyway, the meal was invited by Yue Hua, and the accommodation fee was paid by Yue Hua, to exaggerate, Yue Hua paid for this time, and he would not be punished if he couldn't complete the task today, so it was better to take a rest first and recuperate to the best state.

——————————————————

It's still the monitoring room, but there are already a few more people around Yue Hua.

One of the gray-haired old men hunched his waist and said with approval in his eyes, "Oh? This kid actually started meditating? It's rare to have this kind of awareness when you first come into contact with a mecha maker! ”

Yue Hua glanced at the old man, turned his head to look at the screen, and continued: "Of course, old fellow, I gave him all the food and accommodation expenses, and he has plenty of time, otherwise do you think he has such idleness?" ”

The old man laughed, with a wicked smile on his face, and said: "Yue Hua, look at me, I am old, and I can't find a suitable heir to the mantle, or you give me this person, how much money you give him, I will give it three times!" ”

Yue Hua snorted disdainfully, and said with a disgusted face: "Ling Yuan, don't rely on the old and sell the old!" The rare metal on that table, one piece is hundreds of thousands of federal coins, rounded up, three hundred million, take it. ”

"you, you blackmail! Disrespect for the elderly! ”

"What's the matter, can't you gnaw on the old clan?"

Someone next to him exclaimed.

"Behold, the child ... It's back to its peak! ”

——————————————————————————

Ye Feichen opened his eyes and was refreshed. With the assistance of the soul power vortex, his recovery speed is not known how many times faster than ordinary people.

Soul Power Vortex, it's so easy to use!

Although it is said that there is no time limit set by Yue Hua, if he can't finish it today, it will actually be quite faceless.

After gearing up, Ye Feichen started the next task.

Except for a few tools that I hadn't used, some rusty, and almost made a mistake, nothing else was a big mess.

After a few busy times, except for the last one, the front ones have been completed, and they have been neatly stacked on the carving table by Ye Feichen.

After meditating and adjusting for a while, Ye Feichen began to complete the last item.

According to Ye Feichen's observation just now, although the last piece is not as difficult as a perversion, it is still difficult for him, a beginner.

What makes it even more difficult for him to feel that he starts is the carving requirements of this piece of metal, which not only requires wavy horizontal lines, but also carved straight and vertical lines on it, and polished and rounded... Such complex requirements can be called the sum of all the tasks.

What's even more embarrassing is that if you make an engraving on a piece of metal first, then when you make the next one, there will be more or less some impact, and the error rate will increase. Therefore, he must arrange these requirements from complex to simple, and then complete them one by one to ensure success.

Ye Feichen's heart complained frantically.

Where is this mecha manufacturing, this is the challenge of impossible!

But Ye Feichen thought about it, this task is not without a breakthrough.

In fact, most of the carvings he made on this piece of metal were made by him one by one on various metals. Now it's just a matter of copy-pasting.

And there are so many pieces of metal in the shelf, it's really not going to be scrapped, and you can take a new piece and start work again.

Thinking of this, Ye Feichen's mood was much relieved, but his face was still a little complicated.

Without further ado, let's get started!