A night of scarlet dreams

On September 7, Water City, Guangdong Province, Hutao Group's Yuesheng production base

Early in the morning, at 7:00, when he got up, Wei Zhijie was a little confused, he actually dreamed of Ji Weiwei?

All I had in my head was "I still want it?!" ”

Looking at the bottoms of the map, the corners of Wei Zhijie's mouth twitched, and he suddenly felt a little defeated.

After cleaning up the traces, after washing.

Wei Zhijie came to the canteen of the industrial park and ordered his favorite sausages and soy milk.

After eating, I came to the office building, and under the leadership of the executive lady, I came to an independent office.

Zhang Mingyu had already explained these trivial matters.

The office is not too big, an office area, a reception area, and a rest area behind a secret door, the layout is similar to that in Shanghai, but the decoration style has changed.

Memories of parallel worlds are the same.

After cleaning up the table, Wei Zhijie put his laptop on the desk.

Come to the reception area and make the tea.

Looking at the time 07:40, there is still some time before the prenatal meeting.

Browse the memories of the parallel world again.

In fact, the world has changed a little so far.

To sum it up.

First, the project order plan has changed from 6,000 sets to 20,000 sets.

Second, it has the right to allocate project funds and personnel.

Third, it changed Ji Weiwei's fate.

Fourth, this urgent mission should be successfully completed.

These small changes will eventually have an immeasurable impact on the future.

The memories of the parallel world have a huge impact on themselves, and when you experience these memories, you will have a sense of being there.

Therefore, Wei Zhijie feels that he is rapidly becoming mature, steady, and moody.

I unconsciously have some sense of leadership majesty.

Everything is going for the better.

8:00 Workshop meeting room

Held the "Prenatal Technical Disclosure Meeting of Household Products of Qiong Province Shanshui Linxi Project" on time

All the production masters involved in the production of this product are all present.

Even Zhang Mingyu, chairman of the group, and Zhang Yufei, general manager of the Guangdong branch, were also present to listen.

And there is also a new face in his twenties, presumably the assistant to the chairman or something.

The meeting was chaired by Huang Huifeng.

At the meeting, the large screen went through the product drawings one by one, and carefully explained the product structure, the process specifications of the accessories and the opening parameters of the hardware.

And the precautions during production are clarified.

Last night, Wei Zhijie's reminder, Huang Huifeng repeated it almost word for word.

Wei Zhijie could obviously see the surprise and sudden weakness of heart from the faces of the following masters.

In the memory of the parallel world, from cutting, edge banding, hole layout to packaging, almost all of them were wrong at the beginning.

Because the quality requirements of bathroom cabinets and home furnishings are different.

The masters of the cutting never slotted saws, and the maintenance of the saw blades is not diligent, and the plates that are opened appear all kinds of chipping, sawing coke, chipping, jagged, etc.

Fortunately, Huang Huifeng knew the importance of the project, and when he inspected the line, he quickly discovered it, so he didn't let these unqualified boards open too much.

When it came to edge sealing, there was no pre-washing, because the pre-washing amount was not increased when cutting.

When the plate is produced, there is a detailed list, and there are two data on the list, one is the cutting size, and the other is the forming size.

Like what:

Forming size: 450*300mm;

Cutting size: 448*298mm;

When the thickness of the edging is 1mm;

The master knew at a glance that there was no need to pre-wash. Because the plate is sealed all around, add 1mm up and down, left and right, which is exactly the molding size.

But if the cutting size is: 449*299mm, you know that you need to pre-wash.

The pre-wash value is generally 0.5mm, and the two sides are washed off exactly 1mm, plus the thickness of the edge banding on both sides, which is just the molding size.

Therefore, when the material is cut, the master sees that there is no pre-washing amount, even if the quality of various corners of the plate is not good, the edge sealing master can also seal it.

At the time of discovery. A third of the plate has been sealed.

After a review, all of them are judged to be unqualified and need to be redone.

Fortunately, Zhang Yufei, a turtle master, is more cautious, and he has been doing projects for several years, so he can be regarded as experienced, and when he purchased plates, he bought twice as much.

Otherwise, whether you can do it in the end is really not certain.

The core of this task is to be in a hurry, only half a day to prepare materials, one day to produce, one day to install, and the transportation must be by air.

In the memories of the parallel world, when it was discovered that it was necessary to re-produce, two hours had passed.

The original plan was to load the truck at 5 p.m., but it was postponed until 8 p.m., and then the truck was hurriedly loaded to the airport.

In this world, with so many layouts made by yourself, I believe that the task will be much smoother.

The technical disclosure part will soon come to an end.

Began to enter the production line master to ask questions, and if there were questions, Huang Huifeng answered.

Zhang Mingyu, Zhang Yufei, and Wei Zhijie all listened quietly.

8:45 The meeting draws to a close.

The exchange between Huang Huifeng and the production line master was fruitful.

Then.

"I want to fly to the sky, shoulder to shoulder with the sun, the world is waiting for me to change......"

Zhang Yufei's hand-machine-bell-ranging, he looked at the number, his face changed slightly, and he immediately picked it up.

"Hey, hello Boss Huang, huh? Is the truck broken and under repair? Will the countertop be delivered at noon?

It's okay, I asked Master Li from my factory to drive over and pick it up, I guess it's almost to you.

Okay, please help load the car.

Okay, next time you come to Shuishi, I invite you to go to Yunling Reservoir to eat yusheng.

Okay, see you later. ”

Zhang Yufei hung up the phone, looked at Zhang Mingyu face to face, and looked at Wei Zhijie together, who shrugged his shoulders and said that he was innocent.

"I kiss you goodbye, ...... on a deserted street"

At this time, Wei Zhijie's mobile phone also rang, which was Zhao Jingwen's exclusive ringtone.

"Hey... Yes... Okay, I got it. ”

Simply responded, surprised, nodded in understanding, hung up, and less than a minute before and after.

Taking advantage of everyone's attention focused on him, Wei Zhijie said: "The information sent back from the project site shows that the space on the A side of the cabinet is eight centimeters shorter, the second bedroom wardrobe space is six centimeters shorter, and the master bedroom wardrobe space is seven centimeters longer.

The drawings need to be adjusted, and all floor heights need to be increased by three centimeters. ”

(Popular: 1 cm = 10 mm, 1 m = 1000 mm)

After speaking, Zhang Mingyu and Zhang Yufei's cold sweat is about to come down, if it is produced according to the drawings given by the project, it will really be Barbie Q.

The cabinet space is shorter by 8 cm, which is equivalent to the drawings given by the project team, and the width parameter is 2430mm, but the site is only 2350mm.

The countertop can be cut short on the spot, or the width of a cabinet can be changed, but there is no way to change the door panel on the spot, because after sawing short, there is no way to seal the edge on the spot.

Because edge banding requires hot melt glue, in the memory of parallel worlds, there will be no portable small edge banding machine until 2020.

So in the end, there was a cabinet without a door panel, so I could only fool the leader and say that it was an open cabinet made on purpose.

The second bedroom wardrobe is also a problem.

The wardrobe in the master bedroom is depressed, the space is 70mm longer, and when it is installed, there was originally a 50mm wide sealing board around it, but now it needs to be 75mm wide.

When encountering knowledgeable leaders, they will dislike that the sealing board is too wide and wastes space.

The most terrible thing is that the floor height is 30mm high, the original drawing is 2720mm, now it is actually 2750mm, after the product is installed in, there is a 30mm gap.

That's ugly.

When this happens, it's a design accident, a proper low-level mistake, which can make peers laugh off their big teeth.