There are 16 lines in the cutting link of the factory.

Among them, there are 4 sets of back-loading heavy-duty electronic saws, 4 sets of front-loading medium-sized electronic saws, 7 sets of heavy-duty sliding table saws, and 1 set of CNC cnc.

Of all the equipment, the master who operates the heavy-duty backloading electronic saw is the most relaxed.

As a cutting equipment with a rear automatic loading lifting table, all that a heavy-duty electronic saw needs to do is program it and press a button.

Then, with the help of pneumatic floating beads, the plate can be cut and turned.

Compared with manual sliding table saws, heavy-duty electronic saws can be formed in one go, and after nearly five minutes of flipping and cutting, four large slabs can be directly cut into several specifications of parts.

What a heavy electronic saw worker has to do is to lift the cut parts onto the pallet of the roller line, which is much easier than the small worker of the sliding table saw.

If a sliding saw worker still needs skills, then a video saw worker is purely a porter.

Because it is relatively easy to drive a heavy-duty electronic saw, the unit price will be less.

1.1 yuan per square meter.

The heavy-duty post-loading electronic saw, superimposed with 4 large slabs for cutting, can cut 550 large slabs in ten hours per shift.

550*2.97=1633.5 square meters

1633.5 * 1.1 = 1796.85 yuan

Of the 1796.85 yuan, because the small worker is only equivalent to a porter, as long as the body is strong, it only needs to be about 4500 yuan per month.

After distributing 150 yuan, the master of the heavy-duty electronic saw can almost get about 1650 yuan per day.

According to full attendance, 1650 * 30 = 49500 yuan.

This is a very terrible amount, which is why the masters have worked in the original enterprise for ten years, and they have to come out first to earn this money.

In the original business, this revenue would have dropped by a factor of 4.

Next up is the medium-sized front-loading electronic saw.

The difference between a medium-duty front-loading electronic saw and a heavy-duty rear-loading electronic saw is that it cannot be loaded automatically, and the loading method is similar to that of a heavy-duty sliding table saw.

It is also loaded from the pneumatic lift on one side.

However, the operating table of the medium-sized front-loading electronic saw is also assisted by floating beads, and four pieces can be pushed together when loading, which is much easier than the loading of the sliding table saw.

In terms of cutting, medium-sized electronic saws are almost the same as heavy-duty electronic saws, but they are more troublesome when loading.

Moreover, it takes more time, and the efficiency is lower than that of the heavier electronic saw, and the superimposed cutting is about 500 large boards a day.

Therefore, the wage rate of medium-sized electronic saws is 1.2 yuan per square meter.

The benefits are similar to those of heavy-duty electronic saws.

Finally, there is the CNC Cnc electronic cutting saw, which is actually not suitable for cutting machinery for engineering orders.

Because CNC CNC cannot superimpose the material, it can only process one large plate at a time.

Its operating principle is to fix a large plate on the operating table by vacuuming, and then wash out the desired shape through the washing knife above.

This kind of machinery is more used in the production of shaped blister doors and painted doors.

It is used on engineering orders, and the only advantage is that it can produce a wide range of special-shaped components.

For example, arc plates, corner cutting plates, plates with round holes, especially stove cabinets for cabinets, and fixed plates above the front, need to open 5 breathable meshes.

Processing with this equipment is much less worry-free than manually opening holes in the hanging gong.

Its wage is 1.3 yuan per square meter, plus a processing fee of 2 yuan for each special-shaped part.

Even if the part is a very small thing, it is a processing fee of 2 yuan.

Therefore, the masters of CNC can theoretically only open 80 large boards for ten hours per shift.

With about 800 components, they have a low income from area pricing, but a lot of income from special-shaped fees.

80*2.97=237.6 square meters.

237.6 * 1.3 = 308.88 yuan.

800*2=1600 yuan.

1600 + 308.88 = 1908.88 yuan

Compared with heavy-duty electronic saws and medium-sized electronic saws, the benefits of data CNC are not low.

To operate this device, you also need to understand data writing, and not everyone can use it.

Finally, the heavy-duty sliding table saw relies on the master's craftsmanship, and the processing fee is 1.5 yuan per square meter.

At this point, the project has actually entered the mid-stage stage.

The early stage is to implement the model room, follow up the review of the model room, and sign the order contract.

Then, according to the content of the contract, the total number of materials is decomposed, the material supply chain is built, and the materials are purchased and returned to the factory.

The site began to draw and measure the house type in batches, and painted the product drawings that conform to the actual size of the site.

Implement product manufacturing, whether it is self-made, or outsourcing, OEM can be.

At this point, the preliminary stage is over.

An important sign of the mid-stage is the start of production of the product, followed by the preparation of the fleet to transport the product to the construction site.

Organize manpower to start the installation, ensure the installation progress, and carry out the overall acceptance until the end of the first batch of installation.

This process lasts for a long time.

The sign of entering the later stage is that the main body of the product stops production, and at most only some sporadic parts are produced.

After that, it entered the continuous closing stage, with more than 70% of the product acceptance and 90% of the balance recovery.

Finally, it enters the closing period and after-sales service period.

In the contract of the project, 3% of the amount is generally set aside as the cost of the one-year warranty period.

This stage is a period when the project party continues to deliver the house, and there will be various after-sales services during this period.

When the project party asks the product party to come to the after-sales service, and the product party is not timely after the sale, the project party will use the remaining 3% of the funds to ask the after-sales personnel to do the service.

After a year, pay as much as you have left.

If it is not enough, it may also collect money from the product side. But this rarely happens.

The gaze returned to the Shanshui Forest Creek project, the munitions warehouse.

Since September 14th.

After more than a week of traveling to Qiong Province, the installers and masters mobilized by the hundred cities returned to the munitions warehouse at two o'clock in the afternoon.

The mental outlook of each master has been greatly improved.

As Wei Zhijie, who has a meticulous work arrangement, why did he arrange the installation masters to Cangjiang a week in advance? And arrange a seven-day tour of their Qiong province.

It's not that the money is burning indiscriminately, but because in the actual work, when these installers are mobilized, many of them work in the franchise stores of major brands.

Many orders are still in after-sales status, or after installation, there will still be some minor problems.

If it doesn't end seven days in advance, when the masters are invited to the project, if they start working immediately, they will receive a lot of after-sales calls during the process.

This will not only affect the installation progress of the installers, but also affect the efficiency and installation effect. Therefore, the installers were pulled to Qiong Province a week in advance.

After a week's travel, the business of Baishi has basically been handled completely, whether it is entrusted to others or the apprentices left by the masters.

After that, it's time to travel light.

After returning to the munitions warehouse, Zhao Jingwen arranged dormitories for the installation masters and ensured logistics materials as soon as possible.

Then, in the tool warehouse, each installer is equipped with a full set of installation tools.

In terms of motor tools, there are: hand drills, percussion drills, jigsaws, angle grinders, air pumps, air gun nails.

Auxiliary tools include: tape measure, angle ruler, hammer, pliers, awl, screwdriver.

In terms of consumables: pencils, bits, blades, saw blades, gun nails, grinding wheels, woodworking saw blades, sandpaper, etc.

The motor tools purchased this time are all imported from Germany, and the whole set of tools cost nearly 10,000 yuan, and 300 sets of tools were purchased at one time.

Throughout the afternoon, 98 installers checked in and collected the tools.

According to the plan, the first batch of products will be delivered to the project in two days.

At that time, for Chen Weikang, whether he can go home with the little widow at the end of the year depends on the installation income in the past few months.

In the afternoon, Wei Zhijie said goodbye to Zhang Yufei and Huang Huifeng and got on the plane to Qiong Province.