Tower of Time.

As the saying goes, "Little Farewell is better than a newlywed", the morning of the second day after Xia Duo's return, it was not until the magic moment reminded him many times that he reluctantly let go of Niya, and then the two got up together.

After breakfast, Nia went to the top floor study to continue her work on the communication lock, while Xia Duo went to the common floor to see how the Demon Slayer Charm was being produced.

Before he came, he had already learned from Niya that the production line of the Demon Slayer Talisman was placed in Workshop 023 on the public floor, so this time he went straight here without giving the relevant personnel any time to prepare.

Pushing open the door, the most realistic production scene of the Demon Slayer Talisman production line appeared in front of Xia Duo-

Two parallel workbenches, intersecting at the end of a section near the room, are home to seven alchemical circles at specific locations, allowing twenty-one people to work at the same time.

However, at this time, there were only about thirty magic mechanics that Xia Duo could see, and the area around the workbench was crowded.

But the large number of people does not mean chaos, on the edge of the seven alchemy arrays, only sixteen people actually need to operate the magic circle to make the Mithril components needed to make the demon slaying talisman.

The others, mostly the assistants of the sixteen, provide support for auxiliary lines or precise measurement spells; A few are the final assembly and packaging in the later stage.

In just a moment, Xia Duo saw the entire production process of the early stage of the Demon Slaying Talisman - from the tiny Mithril grains to the delicate and delicate Mithril components, and then to the prototype of the talisman encapsulated in sterling silver after the final assembly.

There is no link to the magic network, that is because it has only been two days since Xia Duo asked Alberk to bring back the mass production design plan, and today is only the third day.

If the relevant personnel want to be familiar with the final production steps of the demon slaying talisman, it is not something that can be completed in a day or two.

"Your Excellency!"

"No need to be polite, you are busy with yours, I will take a look at it."

Rejecting everyone's gifts, Xia Duo slowly walked behind the encapsulator at the end of the production line, and three small wooden boxes without lids suddenly came into view.

The inside of the box was divided into small compartments of 6 x 6 in length and width, the first of which was already half filled, Xia Duo glanced at it, and found that there were 29 small silver talismans lying quietly in the small compartment.

He took two talismans and placed them in the palm of his hand, and at first glance they were two inconspicuous little silver medals, without any decoration on them, which contrasted sharply with the other talismans.

But that's what the Tower of Time is all about—

Mass production!

It's not that you can't add patterns to it, but it is bound to increase the process and man-hours, which is still a bit too urgent for a task cycle of less than 20 days.

As long as the core functions are not lacking, those dwarves are at war, and they have some thoughts to appreciate the artistic achievements on a small amulet!

The mass production plan of the Demon Slayer Talisman was studied by Xia Duo in the projection plane, and he himself was very familiar with this plan.

At this moment, he started to try to link the magic net for the two talisman prototypes in his hand, but unfortunately, only one of the two talisman prototypes he held in his hand was successful, and the other ended in failure.

It's not that Xia Duo is not familiar with the steps of the Demon Slaying Talisman to link to the Demon Net, but that in addition to the problem of the Talisman itself, the Mithril component inside it has been deviated during the final assembly.

Unless he calculates a new link method on the fly according to this deviation, otherwise, the link will fail one by one, which is the main reason why the yield rate cannot reach 100%.

Thinking of this, Xia Duo took a second look at the current production situation of the production line, and after a little thought, he thought of what could be improved.

At present, the alchemy circle of the Tower of Time is insufficient, and there is still considerable room for improvement compared to the alchemy circle in the [Projection Plane: Remnants of the Empire].

But for the production of the Demon Slayer Talisman, this backwardness is not a problem, the key is that his magic technicians have a misunderstanding of the alchemy circle.

The alchemy circle, of course, is set up for production, but production does not mean only change and output, in fact, the entire process from raw materials to finished products belongs to production.

Mithril components can be molded on the alchemy circle, and the final assembly is also perfectly fine.

The Mithril component of the Demon Slayer Talisman is nowhere near as fine as the spell chip designed by Xia Duo in the projection plane, but it is also very small, and in the process of completing the shaping flow to the final assembly, the slightest bump may have to be reworked.

In addition, it is not easy to assemble such a small "part" during final assembly.

Xia Duo's thought was to equip the final assembly link with an alchemy array, and even if the alchemy array of the Tower of Time was lagging behind, the basic suspension field was also available.

Final assembly in a zero-gravity environment is sure to minimize errors.

It's a pity that these magic mechanics are not even official mages, and if there are those magic mechanics in the remnants of the empire who have the ability to cast spells, Xia Duo also has a final spell specially designed for the demon slaying talisman in his hand.

This further reduces the impact of the human factor.

In addition to the final assembly of the alchemy circle, there is also the outflow process of the Mithril component after it has been shaped, and it is best to be in the suspended field all the time.

Although this requires a certain degree of transformation of the production line, it is still very worth the effort for the expected increasing number of orders for demon slaying talismans.

After only looking at the situation of the two talismans, Xia Duo did not immediately call for the production line, anyway, these magic technicians would not work more than 4 hours a day at most, and it would not be too late to wait until they rested to renovate.

……

After coming out of workshop 023, Xia Duo turned around and went to the magic lab on the same public floor, which was mainly for some information collection, personnel training and other things.

The production of the demon slaying talisman, in addition to the prototype of the talisman, also has the most critical link to the magic network, which can be done by high-level mages, but the number of high-level mages in the Tower of Time is seriously insufficient.

Therefore, when the projection plane was projected, when Xia Duo set up a project for Huck and others, he asked to be able to decompose the process, so that the low-cost mages could also participate in the process of linking the magic net, and share part of the work for the high-level mages.

After arriving at the magic lab, Garner greeted him head-on and bowed slightly, Xia Duo and Garner used to be Niya's apprentices, and their relationship was much closer than that of ordinary mages.

The two exchanged pleasantries for a while, and then talked about the recent developments in the Magic Lab -

"In terms of personnel, in addition to the initial 30 apprentice-level technicians, a number of them have been rehired one after another, and some of the official apprentices of the Tower of Time have also registered as magic technicians.

Beep Pavilion

"At present, there are a total of 112 apprentice-level technicians in the Magic Technician Department, of which only 52 are full-time, and the rest are all on production tasks, so they will come over occasionally.

"There are 9 junior technicians, of which 5 are full-time and 4 are part-time; There are 3 intermediate technicians, of which 2 are full-time and 1 is part-time.

"As for the production, in addition to the communication magic weapons, vigilance talismans, missile wands, and wood pulp paper that have been mass-produced before, the production line of the demon slaying talisman is also running-in, and it should not delay Lord Harlan's order."