Since the cost per mu is not expensive, there is a desire to purchase. Diaphragm

But that's not all the development costs.

If you want to grow food, you have to dig a lot of drainage ditches and drainage channels in this saline land.

The drainage ditch on this side of the farm is much denser than on the pasture side.

There is also the most expensive sprinkler irrigation system, which is not cheap, at least four or five hundred or more per acre of land.

All these miscellaneous things add up, and the cost is expensive.

Fortunately, if we are engaged in the development of saline-alkali land, as long as we can grow grain, we can get subsidies for the development of saline-alkali land.

Especially the one-time subsidy, but it has more than 1,000 yuan per mu. Diaphragm

This subsidy should be able to offset the development costs in the early stage.

Since I decided to give it a try, Chengxin didn't take it to stay longer.

After checking on the Internet, I didn't find where to buy this special engineering vehicle in Qingshi, so Chengxin went directly to Nanhu Province.

Then I transferred to a city that was particularly fond of bragging 13 when I was out there.

The people here are so good at blowing that they often kill people when they introduce themselves at every turn!

You say they brag 13 no?

It took less than half a day for Chengxin to purchase three milling machines and spent more than six million.

Of course, training a master is essential. Diaphragm

Back in the village, it would be a few days before the milling machine arrived.

It's not because it's a long distance, but Chengxin asked that side to be transformed a little.

The conveyor belts of the milling machine, each of which runs straight from the bottom of the car to the rear of the car.

When the bottom of the car is like a roller, it is inlaid with dense layers, like small pine nuts after the cutter mills the ground.

The milled items are collected and transported to the back of the car via a belt from the bottom up.

If you want to mill asphalt or asphalt road, or even some kind of water-stabilized layer, then there is no problem, just follow a muck truck.

And what about the farm. Diaphragm

The milling depth of this milling machine is not enough, and it has to be carried out a second time.

Teleporting backwards is not an option, it must be changed to the side.

It can be adjusted left and right, and it can be thrown to the same side regardless of whether the vehicle is coming or going.

Therefore, this is why there are two million units, a total of three, but Chengxin spent more than six million.

Fortunately, you can spend money to transform it, otherwise it won't work to use.

I returned to the village, waited for almost a week, the milling machine did not fail, and the uncle who was sent to study at the Oriental Tractor Factory came back.

After a month of studying, the uncle, who is already in his forties and almost fifty, has successfully learned some simple tractor maintenance skills. Diaphragm

This is still more than 30 years of experience in repairing big cars, otherwise he wouldn't even be able to learn Mao in a month.

However, Chengxin came back, the dear uncle and aunt were separated for more than a month, and they did not store it for two days when they came back, and they were sent to Nanhu Province by Chengxin to learn the simple repair and daily maintenance of the milling machine.

Before leaving, the uncle looked at Chengxin and only said a word.

"Labor and management will come back and clean you up."

！

！ It seems that the uncle's anger has not been completely eliminated, and at the end of the year, he must give a red envelope to let him dissipate his anger.

Otherwise, the boss, the boss is useless, in the boss, the other party is also his dear uncle, don't think about turning the sky upside down.

The day after sending the uncle away to study again, Chengxin went to the farm and asked Qiu Dingsheng to open him an IOU of 10 million. Diaphragm

After all, the equipment purchased this time is owned by the farm.

？？？ 10 million, isn't it just over 6 million? Is it necessary to embezzle this money?

Chengxin was not corrupt, and spent more than 6 million yuan on the purchase of equipment.

Yesterday, after seeing off his uncle, he went to the city to purchase a trailer.

After all, the milling machine travels too slowly, up to five kilometers per hour.

And if you engage in lifting and dragging, you can also pull an excavator or something in the future.

The trailer and the three milling machines combined cost a total of 6.9 million. Diaphragm

As for the remaining 3.1 million, it was transferred to the farm's account.

There is no income on the farm, and the daily expenses and the wages of the workers have to cost every month.

That's why Chengxin asked Qiu Dingsheng to give him an IOU of 10 million, but he was not greedy.

After another two days, the modified milling machine arrived.

As soon as the milling machine arrived, Chengxin led three employees who had been repairing the village farm for several days to return to the plain again.

Now there are quite a few people here, and there are many cranes here.

The people of Runlong Agricultural Technology Co., Ltd. are daring to lay various pipelines for the grassland. Diaphragm

Arrived at the dormitory area to rest for half a day, and the next morning, Chengxin led the original tractor team and the training master sent by the factory.

Driving a trailer and carrying a milling machine, I came to the other side of the water pipeline and prepared to start the training of driving and operating the milling machine.

First of all, it's illegal here.

Whether it is Chengxin, or the five people of the tractor team, or the trainer sent by the factory, they all do not have a driver's license to drive a trailer.

But hehe, it's closed to private territory, as long as it can be driven, and no traffic police will come to check the driver's license.

And the terrain is flat, as long as you can drive away, there is no problem.

The milling machine was towed to a point 50 meters away from the canyon lake, and 10 meters away from the water pipeline. Diaphragm

Since there is a canyon and lake behind it, the milling machine is aimed in the direction of the village.

After the trainer drove the milling machine off the trailer, he directly called the two of them to go up to learn.

The cab of this thing is large, and the computer is basically idle, so three people will not feel crowded when they go up.

As the three of them reached the cab, it didn't take long for the milling machine to hear the roar of the engine.

Then after a while, with the sound of Cheng Xin holding the grass, he took the lead, took the remaining three people in the tractor five, turned around and ran to the side.

It turned out that the milling machine had been warmed up for a while, and then the planing and washing work began.

A large amount of soil was milled off by the alloy cutter set at the bottom of the car, and then thrown on the right side of the milling machine by the conveyor belt. Diaphragm

With the milling of the milling machine, as well as the soil that was milled out and thrown to the side, a large amount of dust immediately shrouded the surroundings, and the frightened Chengxin hurriedly ran to choose a little.

It wasn't until a while that the milling machine drove a distance of more than 20 meters that Chengxin walked back with someone.

The ground that the milling machine walked over formed a groove that was just over three meters long.

I took out the prepared tape measure and measured it, about twenty-five centimeters in some places, and more than thirty centimeters in others.

to not mill unevenly, the main thing is that the ground is not level.

The milled place is flat and neat, but the surface is not smooth, and there are some dense cutter tooth marks.

After checking the washing place, Chengxin went to the side to take a look at the soil thrown on the side. Diaphragm

The soil that was thrown out was only a little more than a meter wide.

It's good to have more than a meter wide, but it's impossible to plane as wide as you want.

Anyway, I have to plane twice, and when I come back, I adjust the angle of the projection a little, and it will be almost three meters wide.

At most, if you are troublesome in the future, you can use a rotary tiller to plow it once, and it will almost be leveled.

Bending down, Chengxin grabbed a handful of tossed dirt and looked at it carefully.

Fifty percent of the dirt on the phone is tiny soil, and the remaining 50 percent is particles or pieces less than a centimeter.

"Yo, it's not bad." Diaphragm

Looking at the soil in his hand, Chengxin was in a good mood.

Before I tried it, Cheng Xin was still a little worried, in case the milled soil was a much larger piece than a palm, and it would be a little difficult to deal with at that time.

Now seeing the results, all worries are superfluous.

Then it occurred to him that this might be because there were about ten centimeters of soft soil on the surface, so there were so many soil surfaces.

It may not be possible to have so many faces in a single milling.

However, even if the soil is milled out for the second time, only 10% of the surface is the surface, and the rest are such small particles and small clods, Chengxin is not afraid.

It doesn't matter if it's pellets or crumbs, it's dirt anyway. Diaphragm

Such small particles and fragments will naturally become dirty after a long-term soak in the water or rainwater of sprinkler irrigation.