Wang Yi began a long-term experimental state of overclocking from time to time, and everything outside was controlled by Lin Shiqin, and he could act cheaply.

The process has not been interrupted.

In fact, after completing the A1 contact lens lens, Wang Yi has been groping for magic to lock the electron energy level, so that the electrons do not absorb high-energy photons and let the high-energy beam pass through.

(Here you can review the second half of chapter 105, after all, hanging on the science fiction channel, some basic points still need to be in line with the good points.) ）

The research has been going smoothly step by step, and the wavelength of the resin transmission has been about 150nm.

This is already quite an exaggerated achievement!

At present, the EUV lithography machine is still in the laboratory stage of ASML, and there may have been prototypes and prototypes, but the original purpose of the EUV lithography machine is to mass produce chips, and a vacuum environment is required, so it will take time to commercialize chips in the lithography machine itself and the lithography machine itself.

At present, the top lithography machine is a 193nm wavelength immersion DUV lithography machine made by ASML curve overtaking and Semiconductor Manufacturing Co., Ltd., because of the use of liquid refractive index, the ultimate accuracy of 193nm deep ultraviolet wavelength can be greatly increased.

Although the current chip process is still above 20nm, the theoretical accuracy of the immersion DUV lithography machine can reach the limit of 7nm, but to do this, it is necessary to match the process, which is not something that anyone can achieve.

In the past, the lithography machine giants Connie and Canon have always used dry lithography machines, only thinking about shortening the wavelength of the light source, even if they get a 157nm wavelength lithography machine, they are still overtaken by ASML's ruthless corners, thus losing customers.

That's cutting-edge technology, winner takes all!

The DUV lithography machine, even if it is only deep ultraviolet, is quite scarce to choose a lens, and the options available are probably calcium fluoride and barium fluoride.

The photon energy level of deep ultraviolet light is too high and too easy to be absorbed, which is a light that can't even enter the ozone layer, and resin or something is a bit fantastical.

But Wang Yi relied on the blessing of magic power on the electrons in the resin before, and forced it to the extent that the 150nm wavelength could pass.

Theoretically, this thing can already make the scalp of a company like Carl Zeiss numb, and even upgrade the current version of the lithography machine to a certain extent.

It's just that this is still quite dissatisfied with Wang Yi.

In the future, the EUV lithography machine is close to the X-ray critical value of 13.5nm, and the photon energy level is ten times more than the 150nm deep ultraviolet energy level!

Therefore, in the future, EUV lithography machines will choose continuous reflection to converge and adjust, and the final utilization rate will only be about 4%, which has extremely high requirements for light source power, reflective materials and accuracy.

Even Wang Yi can't overcome all these problems in a short period of time!

After all, the 13.5nm extreme ultraviolet rays can ionize even the air, and the reflective material itself will have a service life, and the damage of light to the material during use should also be considered.

The slightest damage to such high-precision equipment is enough to make a world of difference.

Therefore, if you overtake in a corner, Wang Yi has to pick up enough materials for this level of light to pass through!

Originally, at the beginning, Wang Yi relied on the magic power of the mage tower to prepare for strong pressure, and increased the light transmittance step by step to prove the Tao.

But this time, after communicating with this group of mathematicians for so long, it completely opened up new ideas for him!

Just like ASML first relied on the immersion lithography machine to overtake in corners, and then Canon and Connie also began to study the immersion type, and wanted to use the technology accumulated in the past to overtake again, ASML directly opened a new track to get the EUV lithography machine, and opened an insurmountable distance at one time.

Now Wang Yi has completely changed his thinking, directly using magic power to empower electrons that can absorb light, forming a certain degree of magic ionization, and then finding a way to solve the metallicity brought by free electrons!

It's better to be blocked!

And how to suppress the method, through this period of brainstorming to get the corresponding mathematical model.

In addition, if this direction continues, it will be possible to make lenses that can pass through extreme ultraviolet rays and even X-rays.

It can also involve a rather scary application area.

Atomic structure changes with fusion reactions!

The essence of fusion is to destroy the atomic structure of low-sequence elements and combine nuclei with each other to form new elements.

But the requirements of this process are quite difficult, and it is not at all the same order of magnitude as fission, not only because the destruction of the atomic structure requires a lot of energy, but also because the size of the nucleus relative to the atom itself is too small.

Many people don't have a specific idea of the difference between the nucleus and the size of the atom.

For example, if the football field is an atom, then the nucleus is only a soybean placed on the center of the field, and fusion is to destroy the atomic structure and let the two central soybeans of the field collide, so high temperature and high pressure are needed to accelerate the movement to ensure this process.

Fusion is well known as the hydrogen bomb and the sun.

But the fusion reaction between the two is very different.

The fusion of the sun is in an environment where the core is more than 15 million degrees Celsius high and more than 10 times the density of lead, and the fusion is directly completed by our most common hydrogen element, 'Ao'.

First two deuterium fuse to become deuterium, then one deuterium and one deuterium fuse to become helium 3, and finally two helium 3 fusion helium 4 plus two deuterium.

The requirements for conditions are much greater than those of a hydrogen bomb.

The hydrogen bomb is a simple process of deuterium and tritium fusing into helium-4 plus a neutron, and the conditions required are much simpler, and an atomic bomb detonation is enough.

After Wang Yi studied a new way for lenses to interfere with electrons through high-energy rays, he suddenly thought that he would use magic to disassemble electrons in a 'gentle' way, and theoretically the difficulty of nuclear fusion would be geometrically reduced!

If the speed and output power of fusion can be controlled well, it can be regarded as cold fusion technology.

"Heh~, if this thing can be taken out directly, I don't know if it can cause a world war."

After Wang Yi calculated a lot of formulas, he rubbed his forehead.

However, for the time being, even the lens is still in the theoretical stage, and the direct use of the fusion of the deptonium has been done slowly, and the difficulty of directly removing electrons and destroying the atomic structure with the magic of 'gentle' is much more difficult than that of simple ionization.

For example, Jupiter has metallic hydrogen in its core, but it is still far from the conditions for fusion, and even the fusion conditions of brown dwarfs cannot be reached.

But the direction is already there......

……

After finally coming up with the prototype of the theory, and the lens research has also made some progress, Wang Yi asked Lin Shiqin

"How many biologists have been invited by Ambrera?"

"Four teams have been formed, and I have started to study it with the resources I got from TT before, and I will synchronize all the experimental data to you."

Hearing Lin Shiqin's words, Wang Yi is still very satisfied, employees have high subjective initiative, which means that they can save their own energy.

"Is there sand?"

"Yes, but not much, this kind of research-oriented talent still prefers to engage in technology, and the sand is still planted by our old friends."

"As long as they are willing to do things, then let them go, and some of the information from my side will also be sent over when the time comes, and we will discuss it together."

"Understood."

The four teams do not contact each other, and occasionally exchange information with each other, Wang Yi's things are mixed in them, and they will only be regarded as the fifth, sixth, or even seven or eight teams.

The test of gene efficacy can also be opened directly!

What Wang Yi can provide them with is the magic medium of 'ripening' and 'accelerating'!

This can greatly increase their efficiency......

————

Four more ~ the first more ~ Now there is only a theoretical direction, and the real thing is still very early, just like the theory of controlled nuclear fusion has long come out but has been progressing slowly, the theory of the protagonist is just simpler and easier to achieve the goal, similar to the lithography machine relying on the lens to trick it, but it is only a simplification of the steps to overcome a lot of things.

(End of chapter)