Director Yang then said that whoever leaked it would be responsible, and all bonuses and additional rewards would be canceled.

It's very serious, comrades, at the end of the year, this extra has been canceled, then you can only get dead wages, and you don't even have a share of the benefits for the workers.

Several workshop directors came to receive the parts drawings, and Guo Dazi, the director of the third workshop, looked at the simple parts on the drawings, and looked disdainful of Shi Peng, so he still needed to find the best technician? Any fitter or turner can easily get it out.

Shi Peng knew that they were a little contemptuous, so Guo Dazi almost turned his eyes completely white.

In the end, he said bitterly: "The precision of this rod gear is very high, although it is a human-powered bicycle, but the combination of various parts needs to be closely matched, otherwise there will be problems."

I don't know what Shi Peng said, they didn't listen to it, anyway, they didn't accept one by one.

Director Yang smiled bitterly and said to Shi Peng: "These directors are all from the workshop, it can be said that they all have unique skills, and they all compare with each other secretly, no one is convinced of anyone, this is a good thing in production, but it is a defect in innovation and development, and it will be held back."

"I don't know if they listened to it, the car can have errors in the parts, but the engine can't, our engine is purchased, and the rest is produced by us, the door can have an error, so big that it can be a few centimeters, but the bicycle is small, there can be no trace of error in every place, the wheel and the axle are a few centimeters apart, isn't that a joke, I estimate that a few workshop directors will not hit the south wall and not look back."

"It's good to let them learn a lesson, it seems that the province doesn't have a factory without them, especially that Guo Da Dump, the following reaction is not good, if there is no evidence, I would have replaced him a long time ago." qδ

In Guo Dazi's original book, he relied on giving some small benefits, and he didn't take advantage of it, but he was also a coward who took advantage of small benefits, and he couldn't become a climate.

The directors of each workshop returned to their own turf, beckoned all their good hands, asked them to look at the drawings, and asked if they could achieve the minimum error.

Wen Wu is the first, Wu Wu is the second, it has always been like this, and so is this mechanic, unless you can be as outstanding as Shi Peng, so that the second person can't catch up, or the latter will disagree with you for various reasons.

"Director, this is simple, tomorrow the materials will arrive, you see, I promise to make you qualified, those workshops can't compare."

Almost the same words were said in various workshops, but fortunately, the director remembered that he couldn't tell what kind of part this was.

A young man asked the director what kind of part this is, and the director went over with a neck hug: "I want to keep it secret, I know no, if I say that my reward will be gone, the New Year's family will drink the northwest wind, get out, you will know in the future."

Other parts are easy to say, according to the drawings can find manufacturers to produce samples, that is, the axle needs the steel material requirements of the high point, the section chiefs of various departments have their own tasks in each factory according to the drawings to produce supporting parts, but also a question and three mouths, push that I don't know, the factory director knows.

The brother factories speculated that the Red Star Rolling Mill was developing new products, but they didn't know what they were.

The efficiency of all aspects is fast, and in less than a week, the frame, rim and other parts are in place, and the samples are produced according to the size of the drawings.

Shi Peng weighed the weight of the frame, and the conscientious manufacturer was thick enough and heavy enough to hold it with one hand.

The rim is made of good steel, and it will not be deformed when it falls hard.

Forget it, it will be, what the future generations require is comfortable and good-looking, and now they are all produced according to sturdy and durable, the purpose is different, and the result is not the same.

The workshop is quiet, looking at the simple parts and so on to get started is not the case, each workshop will receive the drawings and parts processed out of each other, the problem is out, the gear gap is large, the card is not strict, or it can't match, and some can not move, this is dumbfounded.

The cow blows, I have to raise cattle, leave the backbone elite to work overtime, carefully check the size of the drawing, the calipers should be one step at a time, and the error should be controlled within the wire.

It is not the numerical control of later generations, but it is mainly manual, machine

The backwardness of the instrument has caused unavoidable errors.

There is already a big box of parts sent to Shi Peng every day, and if there are no qualified ones, they can't be used.

Shi Peng and Director Yang are also anxious about these arrogant soldiers, the most important step is never reached, it is impossible to complete the assembly, it is impossible to produce a sample car, without the evaluation of the sample car, it is impossible to transform the machine, unable to produce, unable to start, and the most important link is stuck.

Shi Peng has also seen it, and every processing part is very attentive, but there is no unified standard, and there is no precision machine in the era, which is a gap.

Leave it to fate, I have to do what I should do, and if the rest of this cannot be completed, then it will be considered a failure, and I may have to think of something else to produce, and wait a few more days, I really can't process it, I can't process the machine, and it doesn't make sense to form a production line.

Guo Dazi no longer pouted, his eyes didn't roll anymore, he didn't speak crazy, and he had no confidence.

Yi Zhonghai, as the only senior worker in the workshop, usually takes apprentices or looks at the machine, originally thought that the apprentices could process this part, but they tried one by one, and the whole army was wiped out.

This made Yi Zhonghai handy, and the long-term pride made Yi Zhonghai also overturn, and several of the processed ones were almost unqualified.

A week has passed, and it is still not possible to process a few without taking advantage of the good feeling, it is always a little worse, and there is a little less feeling.

Listening to the workshop director, the rest of the things with this part are finished, just these gear gadgets.

I never thought that gears could do this, nor did I think that they would be so precise that the error would be less than one-tenth of that of a human hair.

Could it be that you are getting old? Craftsmanship is not working? How many people are looking at me, I can't let people down, I want to see what's wrong, am I not good?

Let the apprentice lay his hands, he used the most careful heart in his life to observe the machine and his own movements, looking for the faint error changes.

"Found it, here's the problem."

Yi Zhonghai excitedly said to his apprentice: "Go to the director, no, go to the factory director, and say that I have found the problem, and I will definitely be able to process qualified parts today."

The big and small stewards who got the news gathered around Yi Zhonghai's machine, and Director Yang and Shi Peng also hurried over.

"Lao Yi, what's the problem?"

Director Yang asked impatiently.

"Director Yang, that's the case, for the precision of the parts, we all process them alone, but when the knife is cut and controlled, the moment the hands leave the control machine, there will be changes, and the error will come out, so no one can succeed."

"So you mean two people working together? Isn't that even more uncooperative?"

"Director Yang, there can be a high-tech person who is familiar with the cutting of the machine, and don't care about anything else, and the other can control the coordination of the machine and the knife, so that they can do what they are best at, and they will definitely be able to do it. The main reason is that our machines are too old, and errors are inevitable, so we can only avoid and adjust them manually."

"Okay, okay, the problem has been found, let's try to solve it, who do you see cooperating with you?"

(The author doesn't know how to work such as lathes, fitters, etc., and he doesn't know the measurement of errors, everything is for the storyline, please forgive me)