Chapter 2486 is out

As the development of Huangsha Town is getting better and better, countless peeps have also come in, and Lin Ze can't directly do anything to these people, after all, if he wants to develop Huangsha Town, Lin Ze has to open Huangsha Town, if he really leaves these people, Huangsha Town will not be able to develop.

If there are many people, the problem of people's hearts is a big problem, and if it is not good, it will make some things that are very difficult to clean up.

For example, those royal children rely on their royal status to be powerful and blessed here.

Some people here will say that even the descendants of a top royal family like Yan Zifeng dare not cause trouble in front of Lin Ze, so why do other royal families dare to make trouble?

The reason is actually very simple, that is, these royal children have not yet reached that status, and they only know some scratches.

And it's precisely because they only know some superficial things, so when it's time for bad things, there are definitely them.

They will describe themselves as royal disciples, ask Lin Ze for this, ask for that, and it will be strange if there is no problem after a long time.

Not only the children of the royal family, but also the family, the sect, etc., there will always be some people who can't see themselves clearly, or who are very self-proclaiming, and it will be Lin Ze who will be in trouble.

Therefore, in order to avoid such trouble, Lin Ze simply let go of everything directly, so that these people know what they are facing now, and whether he or they have the ability to deal with it.

In the same way, this is also a kind of support for those who want to put down roots in Huangsha Town, an invisible spiritual protection.

The stronger the strength and heritage shown by Lin Ze's side, the stronger the ability to resist risks in the future, and correspondingly, the more peaceful their life in Huangsha Town will be, in this way, of course, they will settle in Huangsha Town with peace of mind and develop here.

It is with these in mind that this time Lin Ze simply opened the door and let everyone see his magic.

In the end, this effect was also as expected, and the first furnace of steel just now directly scared countless people.

Just the first furnace, more than 20,000 catties of pig iron ingots were directly baked, and such an output is less than one-third of a day's output, such a number really frightened countless people!

Those who are interested in the scene know very well that the war is actually about materials, and now Lin Ze's iron factory can produce so much steel in one day, so it can be said that Lin Ze has the absolute upper hand from now on.

Once a war breaks out, Lin Ze's side can easily form an incomparably powerful steel army.

As long as the thought of facing such a powerful steel army in the future, everyone present felt a chill.

The amount of pig iron was sufficient, and Hu Yan quickly ordered the staff around him to close the trench used for casting, and then opened the trench leading to the iron furnace, and the molten iron flowed into the iron furnace, which had been burning for half an hour.

Obviously, Hu Yan is ready to start frying iron.

The reflex iron oven looks like a gongfu tea cup, but the bottom and walls of this cup are hollow, so the molten iron is directly contained in the cup, and the coal is burned at the bottom of the cup. The flame produced by the combustion passes through the arched teacup of this kung fu cup, reflecting the heat into the cup, continuously heating the molten iron, and then the remaining flame is drawn out of the chimney.

The chimney is buried directly under the trench where the molten iron flows into the section just after leaving the furnace, which plays the role of preheating the molten iron, and the next section of it is entangled with the intake air duct, which continuously heats up the fresh air sent from the blower to the outside, and finally discharges the flue gas with reduced temperature into the air.

In this way, the continuous heating heats the molten iron in the furnace, and at the same time preheats the molten iron on the furnace groove to heat the air blown into the bottom combustion chamber.

This is the maximum use of combustion residual temperature, but also to save energy and reduce pollution.

The vegetation around Huangsha Town is really poor, it can be said that there is no pollution here, originally this is already a semi-desert area, Lin Ze has finally recovered some of the vitality here, and now if the ecology here is directly destroyed because of the sewage emissions of the steel plant, then Lin Ze might as well not build this ironworks.

Compared with steel, the environment is more important to Lin Ze.

You don't look down on these sewage equipment established by Lin Ze, thinking that with the current situation of the Shenzhou Continent, these sewage equipment is actually better than not having them, because they are too backward.

However, in fact, it is not, because Lin Ze has refiners here, and they are there, it is still very simple to use the means of refining weapons and some formation means to arrange some means to reduce pollution.

For example, for example, for example, the problem of dust reduction, Hu Yan directly set up a few dust reduction techniques and other arrays here, and the dust reduction problem here was solved.

Therefore, don't look at the technical level of Lin Ze's steel mill now, there is still a big gap compared with the steel mills in those townships/towns/places in later generations, but in some environmental protection and energy saving awareness, Lin Ze is a lot ahead.

There is a special organization, so the fuel and molten iron in the iron-making furnace are completely isolated, so that you can use coal with confidence, and even directly dig it out and use it, which is much lower than the cost of charcoal that needs to be fired in the kiln, anyway, these coals do not need to contact with the molten iron inside because of isolation, so that the sulfur, phosphorus and other harmful substances in the coal will not be mixed into the molten iron, which directly improves the quality of the molten iron.

At this time, the molten iron has been continuously heated, and it has already glowed with sparkling light - it is caused by the fine slag mixed in the molten iron.

Seeing this, Hu Yan directly started the mixing equipment in his hand, and the large disc on the top of the furnace began to rotate slowly, driving the three wrought iron rods above to constantly rotate and stir in the molten iron.

At the beginning, the molten pig iron smelted in this blast furnace should have a carbon content of about 3 percent, but now after the stirring of these wrought iron rods, the carbon in the molten iron directly reacts violently with the oxygen in the air at high temperatures to produce carbon dioxide and release a large amount of heat.

Suddenly, the molten iron inside boiled the pot, and the bubbles continued to bubble, and even pushed the slag on the surface to the stove and piled up.

The melting point of pig iron is generally about 1100-1200 degrees Celsius, while that of pure iron is as high as 1535 degrees. When the carbon in the molten iron and the oxygen in the air begin to combine, the carbon content in the molten iron gradually decreases, and the temperature of the molten iron also increases, correspondingly, its melting point gradually increases, so the molten iron in the iron furnace becomes extremely thick.

From the first consommé, to the sauce state, and then from the sauce state to the final jelly state......

In the end, they gathered into a very cute iron ball, which looked like lead balls from a distance, and had a great sense of quality.

These poor 'shot puts' don't know that they are about to be beaten.

After stopping the stirring, the workers used long pliers to pick up the lead balls one by one, put them under the forging hammer and beat them continuously.

Ding Ding dang sounded, the carbon element in the iron mass was squeezed out in the form of elemental graphite, together with the fine scum inside, the iron oxide debris on the surface, because it also contained some high temperature residual temperature, so after coming out of the cold air outside, it turned into a little spark in the air.

This forging is just to remove some impurities, the process is actually very simple, anyone can do it, that is, use pliers to clamp it under the forging hammer and knock a few times, there are no other special requirements.

Also, in fact, wrought iron is very soft in a high temperature state, so it is easy to shape and forge......

It wasn't until Hu Yan couldn't see it anymore, and it was also for the sake of convenient management, that he finally announced that he would be hammered into an iron rod in the future, and no other shapes should be arbitrarily made.

Although wrought iron is easy to forge, the process of forging wrought iron is more labor-intensive, and wrought iron is also iron, and dozens of catties of iron still require a lot of strength to clamp up.

In addition, it takes a lot of effort to forge it, so it's not so easy.

But fortunately, there are a lot of workers here, and everyone who can come here as a worker has a lot of strength in their hands, so soon, all the wrought iron is played by special people, and the speed is not slow.

The so-called "wrought iron" that has been beaten is not actually wrought iron in the sense of modern textbooks.

In fact, in the metallurgical industry, there is no such thing as raw and wrought iron, in the modern iron and steel industry, the carbon content of less than 0.02% is called wrought iron in China, and the pure iron is called in foreign countries, and the texture is very soft; the carbon content is called steel in 0.02%-2.11%, and the domestic carbon content of more than 2.11% is called pig iron, and the foreign content is called cast iron.

In ancient times, pig iron was smelted directly from iron ore in a blast furnace, and wrought iron was smelted in a steel furnace. The carbon content of this "wrought iron" is inversely proportional to the frying time, and the longer it is fried, the more carbon oxidizes the carbon, the lower the carbon content of iron, and vice versa, so its carbon content can fluctuate between 0.01% and 1.5%, including "pure iron" and "steel" in the modern sense.

Therefore, in ancient times, frying iron was equal to frying steel, but because of the problems in the process, some of the problems in it were difficult to grasp, and finally the finished product was mainly iron and medium and low carbon steel.

Of course, if you walk the dog, you can run into a piece or two of high-carbon steel.

However, this probability is similar to the odds of winning the lottery now.

Don't get your hopes up!

()