At night, the hustle and bustle of the earth is hidden, and the people who beg for a living in this land are calmed.

However, there are always people who can't be still, because they have more on their shoulders.

Jinling, heavy machine tool factory.

Conference room.

The electric lights illuminated every corner, making the faces of a dozen or so people around them yellow.

Silent people, and silent winds.

In September, the weather in Jinling is still hot, even at night, the wind from the south is still warm.

Inside the room, everyone bowed their heads, as if the yellow light was dazzling.

At the front of the conference room, three serious figures also bowed their heads in contemplation.

Three people, indicating the factory director, deputy director and technical director of the machine tool.

As an important department of domestic machine tool manufacturing, it is also a machine tool factory with a long history.

In the domestic construction, it has been struggling in the forefront of the machine tool factory, the leading enterprise of the first machine department, one of the eight golden flowers, and the heavy machine tool factory with countless honors.

Can't even make a single machine tool?

Thinking of this, the middle-aged factory director in the middle of the conference room breathed heavily.

At the same time, the atmosphere in the house has become subtle.

The middle-aged factory director raised his head and glanced at the people below.

Those who were notified to come to the meeting tonight were all the elite backbones of the machine tool factory, the old people in the factory, and the staunch comrades of the revolution.

In the face of them, the middle-aged factory director felt more angry in his heart.

Bang bang bang

Fingers tapped on the tabletop, and a sudden sound in the silent conference room immediately attracted everyone's attention.

"Lao Cai!"

The factory director said to the deputy factory director on the side, and then saw the deputy factory director nodding and unfolding the documents at hand.

The documents that were rolled into a tube before, he didn't want to look at them,

But at this time, it is not possible not to look at it, and besides, it is necessary to say it.

"Comrades!"

Lao Cai mustered up his spirits, but his voice was low.

"This is a report from the superiors!"

"The content is very simple, the Red Star Rolling Mill has produced a milling machine, Red Milling No. 1!"

"At present, the Red Mill No. 1 has been put into normal production. With the addition of this machine, the Red Star Rolling Mill can currently produce three machine tools, namely Daystar, Red Punch and Red Milling! ”

Deputy Director Cai did not speak smoothly, even a little abruptly and reluctantly, but the people around him understood it in their hearts.

Because they are the same.

Deputy Director Cai was silent after saying the situation, and then the conference room was silent again.

The factory director took a deep breath, and then stood up sharply!

"Comrades!"

Bang bang bang

The table was banged again, louder and louder.

Everyone below shrank their heads, then raised their heads and looked at the factory director with angry faces.

"Do you hear that? Did you hear that? ”

"The other party is already moving forward at a rapid pace, moving forward!"

"What about us? I'm cheeky about the drawings, but what about us? ”

"The machines in the workshop are the best, people, and I believe that the people sitting there are no worse than people."

"But why can't you do it? Who told me why? ”

The factory director glanced at everyone, and the frustration accumulated in his heart was vented out, but the anger was still not dissipated!

"The first time, you said it was careless, but I didn't expect the other party's requirements for accuracy to be so high! Yes. Everyone makes mistakes, and the Great Wall can't be built in a day! ”

"I admit it, let's change something wrong!"

"But what about later?"

Speaking of which, the factory director became more angry, and his breathing felt rapid.

"Lao Zhu, tell me, what's going on."

The factory director stared at the middle-aged man in front of the left below, who was the leader of the team that set up a tough attack team in the factory.

He took the lead in making machine tools this time.

At this moment, Lao Zhu was also helpless in his heart.

At first, when they heard that the Red Star Rolling Mill had come up with a high-precision machine tool, they were surprised when they heard it.

That's a high-precision machine tool, not an ordinary machine tool.

Not to mention anything else, there are only two in their factory, and they are all previously purchased from abroad, and one of them is second-hand.

Even so, with these two high-precision machine tools, they have established the status of their factory in the national machine tool heavy industry, and also clarified the status of the first machine department.

But such a machine tool, a little-known factory in Sijiu City, was actually made?

But after inquiring about what kind of factory the Red Star Rolling Mill was, everyone became contemptuous.

A rolling mill, don't do business, do you engage in machine tools?

Not doing business.

After all, they are the ones who specialize in machine tools.

After hearing the news, some people even doubted whether the other party knew what an ordinary machine tool was and what an advanced machine tool was.

Will there be a difference between the two?

So after getting the drawing, everyone also started a discussion, compared the drawing, and felt that there was something in this design.

At least the level of drawing is much stronger than that of the factory technical department.

As for the rest, the crowd was not impressed.

In their eyes, it is enough to make an accuracy of five, so why do they need to achieve an accuracy of two?

Isn't this a waste of energy, dragging the progress?

Some people even feel that this is unprofessional to be so dead card accuracy.

So, everyone looked at the drawings and made them according to the usual production experience.

In this mentality and environment, not only the workers, but even he was slack, and the requirements for some places were not strict, so that when he was halfway through, he found that he could not assemble according to the existing parts.

Because it deviates too much from the drawing, it is not as good as an ordinary machine tool when it is assembled hard.

At that time, realizing his mistake, he immediately called a halt and told the factory director.

That's when everyone realized that their experience had hurt them.

As a result, there is a second round, targeted remediation.

In line with the principle that materials can be saved, everyone picks out the problematic parts and unqualified parts with unqualified accuracy and modifies them.

But now...

After tinkering, it's even worse.

Lao Zhu looked up at the factory director's gaze, knowing that it was a knife to stretch out and shrink his head, and when things came to this point, it was no longer something he could fool without speaking.

"Factory director, we will replace the parts in question."

"But..."

"But you're not done yet!"

The factory director couldn't listen to it anymore and shouted it out.

"Obviously the drawings are required there, what about you? Self-righteous, too much! ”

"I think I'm an eighth-level worker, I have enough experience, and I don't take other people's things seriously?"

"The first time I didn't pay attention to it, and then it was changed to a four-like!"

"You guys are so capable, why don't you make the machine?"

Old Zhu shrunk his neck, and then became a quail.

When the factory director saw it, he saved some face for him, after all, he was an old man with him, and turned his head and aimed his fire at the technical director.

"Director Sun! You say, the third time, from beginning to end, did it all over again, why hasn't it been done yet? ”

The middle-aged man on the left listened and lifted his glasses.

The beads of sweat on his forehead had rolled down, but he didn't have time to wipe them.

Reach out and open the drawing and lay it out on the table.

"Factory director, we have summed up the lessons of the first two failures, so we strictly follow the requirements on the design drawings to produce."

"Then why, it's still a pair of parts, why is there an extra part after the assembly is completed?"

"In this case, you, you are all masters, will you not understand why?"

Director Sun wiped the beads of sweat from his eyelids, swallowed his saliva, and explained, "Factory director, we really do it in strict accordance with the requirements of the drawings!" ”

"If the drawings were okay, we wouldn't be able to make them!"

"What do you mean?"

The factory director's face suddenly became more serious.

"I, I think, this, there's something wrong with the design of this drawing."

"Huh? Sun Tengfei, speak with a basis and be responsible! ”

Director Sun stuttered a little, but still expressed his opinion.

"Factory director, we have been a big factory for many years, what kind of tasks have not been done, this kind of machine tool, I think with our ability, can be done."

"But it hasn't been made yet, I, I think so, there is something wrong with this drawing."

"Yes, the factory director, they are all time-tested revolutionary comrades, and they will not be hindered and confused on this issue."

"What machine tools haven't we done over the years? But this thing, after so long, still can't make it. ”

"Also, there is no news from the other two machine tools that got the drawings with us."

"I now wonder if the machine tools made in the rolling mill are real."

"After all, the yield per mu could be cheated back then, and we have to guard against it."

Deputy Director Cai helped to speak, "I think it is necessary to ask the superior for verification!" ”

"Yes, factory director, I think it's better to verify, and if you can't keep it, the other party will keep it!"

"That's right, but I can't rule out a mistake when I make a mistake!"

"If there is a problem with the drawings, we won't be able to make it for a long time!"

The people below immediately spoke, and one by one they looked at the drawings with suspicion.

When the director heard this, his brows furrowed, and then he sat back down.

He really hadn't thought about it.

When everyone saw this, they didn't say much, the specific situation is still up to the factory director.

The meeting continued, and after another half an hour was set, a new round of tasks was set, and the factory director said that the meeting was dismissed.

Then he walked briskly back to his office, sat in silence at his desk for a while, and then picked up the phone.

Moments later, the phone picked up.

"Lao Ning, I, Huang Shengli!"

When he heard the voice on the other end of the phone, he immediately heard laughter, "Lao Huang, calling so late, you have something to do!" ”

"Okay, you're still in the office at such a late hour, isn't there something wrong with you!"

"Yes, you guy is a good brain, let's say, why are you calling so late, I still have a lot of headaches here!"

Director Huang snorted, and then asked, "Lao Ning, where have you done your machine tools?" First of all, I haven't made it yet. Calling is not spying on intelligence, and there is no joke! ”

"What do you mean, Lao Huang?"

Hearing him say this, the other side was a little confused.

"Lao Ning, we have a meeting today."

"Have you ever wondered if there will be a problem with this, the drawing?"

After speaking, there was silence on the other end of the phone.

After a long time, a deep voice came.

"Lao Huang, you, you have to be responsible when you say this!"

"Don't talk about anything else! Logistics Department, Lao Xue, you know, they have one now, and they are also organizing production internally. ”

"If there's a problem with the drawings, they're not going to know about it?"

After saying that, there was silence again on the phone.

However, soon the voice sounded again, "Lao Ning, Lao Xue, they don't seem to have made their own." ”

In a word, while Director Ning gasped, he thought more.

Either there is a problem with the drawings, or the consequences, whether it is the mistake of the superiors or the deliberate actions of the rolling mill, they are happy to do this, but they must offend people.

And the other, if there is no problem with the drawing, then.

However, as a fighter who has been fighting for a long time, he has long understood that there are some things that he can't say through them.

There are some things that need to be said by others, not by yourself.

So he said in a skeptical tone, "It's not true, but I've heard about it soon!" ”

"Aren't we going to be fast, but are we done?"

Silent, both holding the phone, but not knowing what to say.

"What are you going to do?"

After a long time, Lao Ning asked the key, and Director Huang mentally scolded the old fox, but as the initiator, he still had to talk about it.

"We're a bit light on one person, so it's best to co-brand."

"Ask the superior to review the drawings!"

"If there is a problem with the drawings, we have not produced it for so many days, and it makes sense."

After a while, Lao Ning's voice came, "Okay, it's not a matter of waiting like this, since this is the case, it's okay for us to ask a few words." ”

"And the southwest one, do you want me to contact you?"

"I'll go, I told him twice."

"Okay, then let's finalize the time and say it to the top together."

"Good!"

Smack

The phone hung up, and Director Huang leaned back in his chair.

He knows it.

This time, if there is a problem with the drawing, it is easy to say anything.

If the drawings are okay and they can't make them, then it's just a slap in the face!