Machinery Factory, Second Workshop.

When Yang Xiaotao, Liu Huaimin and Chen Gong arrived, in the middle of the crowd, Liu Daming, Zhou Hong and others were inspecting the machine tool with serious expressions.

"Xiao Yang!"

On the side, Yang Youning stretched out his hand to beckon a few people to come to his side, and they all looked at the machine tool in front of him.

This milling machine is more than half larger than the first Red Mill No. 1, and the base is half a meter higher than the Red Mill No. 1, in addition to many parts that the Red Mill No. 1 does not have.

The unique control panel, fixed table, robotic arm, etc., all show that the machine tool in front of you is different.

"Is it going well?"

Liu Huaimin saw that the people around him looked nervous, and asked carefully.

Yang Youning nodded, "I'm still trying, it should be fine!" ”

As he spoke, he looked at Yang Xiaotao on the side.

At this time, Yang Xiaotao was wearing glasses, and his vision was constantly scanning the milling machine that the cat was working on, and compared with the designed pictures, he did not find any problems.

"No problem!"

Yang Xiaotao took off his glasses and gave an answer.

When they heard this, they put their hearts back in their stomachs.

With the guarantee of Yang Xiaotao, an authoritative expert, there must be no problem.

It's just that Yang Youning's eyes stayed on Yang Xiaotao's face, because after Yang Xiaotao finished speaking, he didn't show a smile, which made him very sad and brought it up again.

And at this moment, Yang Xiaotao was thinking about how to tell Father Ran about this and tell his superiors.

If you know the conspiracy behind this, it is estimated that it is another "earthquake"!

But at that time, it should have nothing to do with the first machine department!

Thinking in his heart, Yang Xiaotao made up his mind to make this matter public, not for anything else, but to sound the alarm for domestic experts.

A scientific war without gunpowder has begun.

The battlefield is not a beautiful laboratory, but it is no less cruel.

Because the defeat of this war will bring about an all-round backwardness.

And if you fall behind, you will be beaten!

"Xiao Yang, what are you thinking?"

Yang Youning's voice suddenly came to his ears, Yang Xiaotao came back to his senses, saw that the people around him were looking for sounds, and hurriedly looked back, knowing that this was not the place to speak, so he pondered for a moment, "There is something to talk about!" ”

Seeing this, Yang Youning and Liu Huaimin glanced at each other, a little worried.

Without telling Liu Huaimin and them in detail, Yang Xiaotao turned around and glanced at the crowd, and then beckoned to Wang Hao, who was in charge of guarding on the side.

Wang Hao saw that he was approaching quickly, Yang Xiaotao whispered in his ear, and Wang Hao understood and quickly left the workshop.

When Yang Xiaotao came to the front again, Zhou Hong was seriously operating the milling machine and doing debugging work.

At this time, a group of people appeared at the door of the workshop, and Wang Guodong led them to the front of the people, and heard a voice sound.

"Oh, it's better to come here than to come sooner."

When everyone turned around, it was Wang Dahai who led the people to the front.

Liu Huaimin hurriedly turned around and went up.

"Secretary Liu, Director Yang, come uninvited, forgive me!"

Wang Dahai was polite, and glanced at Yang Xiaotao again.

The two of them understood.

Liu Huaimin stepped forward to shake hands and welcome, although there is a gap in status, but in terms of life, Liu Huaimin respects Wang Dahai very much!

This is a very pure revolutionary comrade.

"Director Wang, welcome!"

Liu Huaimin shook his hand and was very happy.

"I heard about your happy event, so I just came over with the car to have a lively time, and I saw it!"

Wang Dahai is also a bold person, the two talked to each other, and finally came to Yang Xiaotao and hugged directly.

"Brother Wang, you are really a big surprise."

"Haha, I ate the fish you made last time, and I will never forget it. This time, I brought sorghum wine with me. ”

"Really? It's enough to drink. ”

"Can you bring only one altar?"

Ha ha.

Everyone laughed, and Yang Xiaotao glanced at Wang Da

The people who were watching behind the sea immediately understood the purpose of coming, and stepped forward to meet a few people.

"Master Zhou, you're in good health!"

The two shook hands, and Master Zhou was embarrassed to see Yang Xiaotao again, nodded and smiled, "Director Xiaoyang, okay, everything is fine!" ”

"It's just a quick whip along the way, this ass is a little numb."

Everyone laughed when they heard this, and finally talked about the machine tool.

Wang Dahai said the purpose of this trip to Yang Youning, Yang Youning immediately patted his chest, "No problem, our revolutionary workers are a family, it just happened that this is just a test machine, let them communicate and communicate together." ”

Wang Dahai smiled even more.

Several people were arranged, and everyone watched the test of the machine tool again.

At this time, Zhou Hong was already sweating profusely, but his face showed a relaxed expression.

Chang Mingjie stepped forward to ask, then nodded, came to everyone, and reported to Liu Huaimin and a few people, "Secretary, factory director, Mr. Yang, this semi-automatic milling machine has not been accepted by all departments."

Question, next, you can do the real test. ”

Liu Huaimin smiled, "Okay, let's take a test!" ”

Chang Mingjie nodded, and then asked someone to take some of the drawings of the diesel engine.

Yang Xiaotao glanced at it, it was the main part of the engine piston, and then Chang Mingjie stepped forward to explain.

"Ladies and gentlemen, now the components we are testing are the ...... of the engine"

While Chang Mingjie explained, Liu Taiming and several people on the side began to operate the machine tool!

The bureau master of Quancheng also stepped forward to watch and study.

Yang Xiaotao took the opportunity to explain, "This part of the manufacturing requirements for precision is very uniform, and the precision of the manufacturing of the upper three rings will affect the power output of the engine." ”

"Originally, due to the limitations of personnel and machinery, the daily output was severely restricted, and even with the use of the Red Star, the success rate was only 60%. And the requirements for human operation are not low. ”

Everyone listened and understood what was going on, and the main thing was efficiency.

If it's all done by people, and the quality is ensured, then the quantity doesn't need to be considered, especially at the moment, just waiting for the diesel engine to roll off the assembly line!

Yang Xiaotao explained that Liu Daming had fixed the rough embryo on the workbench, and on the other side, Zhou Hong began to operate the control panel according to his experience and the data left by the design mark.

In the eyes of Master Zhou of Quancheng, this operation plate is so familiar, because there is a similar appearance on the grinding machine of their Quancheng Machine Repair Factory.

And that one was designed and made by Yang Xiaotao himself.

At that time, I blamed myself for not making it, but I didn't want anyone in this machinery factory to make it except Yang Xiaotao, it was really Crouching Tiger, Hidden Dragon!

After Zhou Hong set the data, he nodded to Li Tiejun on the side, with his experience in electricity and solid skills, Li Tiejun came to the R&D department, and became an important power talent.

As Li Tiejun closed the electric switch, the green light on the milling machine turned on again, and then the conveyor sent the processed rough blank to the milling cutter according to the setting, and then Zhou Hong pressed the milling machine running switch, and the milling machine began to run according to the designed line.

This sharp milling cutter is made of tungsten alloy, and under the rotating power, any resistance encountered on the way is spun into steel wire and iron filings.

In just half a minute, the main body of a piston appeared in the eyes of everyone, and at this time, some people were ready to applaud, and they couldn't stop smiling in their eyes.

And that's just the beginning.

As the milling cutter stopped, Zhou Hong replaced it with a new milling cutter, this time pulling the ring.

At a fixed distance on the top of the piston, pull out three rings.

A few moments later, the milling machine started again, again repeating the same work, but it was even faster, and it took just over ten seconds for three steel rings to appear on the piston.

The machine tool was suspended, the conveyor was withdrawn, Zhang Guanyu stepped forward to take out the finished piston, took out the tape measure and began to measure, and everyone watched nervously.

Finally, I communicated with Zhou Hong and Liu Daming, so I re-tested.

It made everyone's hearts a little anxious.

Yang Xiaotao explained on the side.

"This is a normal phenomenon, and you need to find out the accuracy that the scale represents."

Yang Youning nodded and continued to star!

When the third production was completed, several people finally had smiles on their faces.

"Secretary, factory director, Mr. Yang, leaders, the machine tool test is qualified. The pistons are manufactured to meet the design requirements. ”

Zhang Guanyu took the report and said loudly.

Bang bang...

Yang Youning didn't have to endure it anymore, clapped his hands hard, and Liu Huaimin put his hand on Yang Xiaotao's shoulder with relief, "With this, let's be stable." ”

Yang Xiaotao nodded. There were bursts of applause and cheers around, and soon cheers rang out outside the workshop.

"Director Zhang. Continuing the experiment, I'm going to see how productive it is. ”

Yang Xiaotao continued to ask Zhang Guanyu, and Zhang Guanyu nodded.

After a while, Liu Daming commanded people to get busy, this time looking at efficiency, naturally there was no need to convert the milling cutter or anything.

A group of workshop workers put the prepared rough embryo on the conveyor, this conveyor belt can be placed twenty rough embryos at a time, and there will be workers to put it up, as for the processing of the rough embryo, the general iron bed can be completed, which is also the reason why Chang Mingjie advocated leaving a red milling No. 1 and did not let Yang Youning finish the task.

Otherwise, Wang Dahai would not have come.

Everything was arranged, Zhou Hong set the coefficient under the supervision of Zhang Guanyu, Li Tiejun started the conveyor, and the machine tool started.

So there was a shocking admiration in front of everyone.

The conveyor belt will send a rough embryo to the fixed table, after quickly locking, after the milling machine from the bottom to the top of the processing, a semi-finished piston is successfully completed, and then the milling cutter is abandoned, the fixed table is loosened, and the workbench is left under the effect of the transmission device, and is taken down by the rear workers and put into the basket, and then after ten meters of seconds, the next piston is processed again, and the speed is as fast as catching ducks, one after another "into the water".

The rough embryos on the conveyor belt are consumed so quickly that the workers have to speed up the placement.

"Quick, too fast!"

"Oh my God!"

There were exclamations from the people around, and Wang Dahai watched from the sidelines, even more excited.

So fast, it's beyond imagination.

Even Yang Youning couldn't help but open his mouth wide, came to the basket, and couldn't help but pick up the piston with the temperature, "This, really, really fucking fast!" ”

Yang Xiaotao nodded on the side, "Yes, this is the power of machinery." ”

A good machine is stronger than the labor force of a hundred people!

Liu Huaimin said happily, how could a hundred people be able to do this with the fast-running machine tool in front of him?

Yang Xiaotao looked at it for a while and suddenly shook his head, "It's better to delay the time, it's best to cooperate with the two milling machines, so that the process will be the finished product directly." ”

Hearing this, Yang Youning nodded. If there are two, the production of diesel engines will no longer be a problem.

After a while in the workshop, after testing, the qualified rate of finished products reached 90%, which is already very high, especially under the huge base, the production efficiency has met the requirements of the machinery factory.

Of course, the machine tool is not omnipotent, and it needs to be checked after a period of operation, the oiling of the oil, and the maintenance of the maintenance.

The workers know this very well.

After Wang Fa learned the good news, he immediately organized people to move the sharp bed to the fourth workshop, and at the same time let Liu Daming train the operation of the milling machine, and the comrades from Quancheng joined the study.

The people in the second workshop who completed the task took a half-day off in advance, waiting for tomorrow to celebrate the Mid-Autumn Festival together.

Of course, this refers to ordinary workers, as for Chang Mingjie, they must not only write a general report, but also develop an operating manual for a semi-automatic milling machine.

At the same time, a maintenance procedure is formulated.

This thing was originally proposed by Yang Xiaotao, and now it is emphasized, and all workers must do it.

It is also an important means to avoid problems and ensure the safety of man and machine.

After Yang Xiaotao returned to the office, Wang Hao had already picked up Ran's father and came to the machinery factory.

(End of chapter)