The warehouse of rubber raw materials and waste steel bars has been piled up, and the newly recruited interns are cutting steel bars according to the requirements at this time.

"Brother Ji, the mold is still good, but isn't it a waste for us to use electric heating?"

Seeing that Ji Donglai was checking the steel wheel with iron pliers, Ding Aixing asked in a low voice.

In the traditional impression of Ding Aixing, these things are heated by gas or coal. Ji Donglai still has coal here, so it's better to get a simple boiler over there, go up with a blower, and put the iron lump there.

Burning red steel bars is also a matter of minutes, and now it is heated by electric induction, and the efficiency has come up, but the cost has also gone up.

The indication of the meter is the same as pulling it by hand, and after a long time, Ding Aixing is worried that Ji Donglai will not be able to stand the cost.

"You can try it in winter, but now burning coal is easy to cause dissatisfaction among the people around us, and once we are reported, we are easy to be driven away! We are too small in the current situation, first of all, we have to live! ”

"The core of industry is nothing more than efficiency, and it is superfluous to say anything else, do you know? In the future, if there is natural gas here, we will be able to pull a pipe here, and then our cost will be reduced! Do it now, and make sure our people stay safe! ”

"It's not all ten or nine times to do stamping, we're all young, I don't want this to happen when you're not married, not to mention that I don't have the money to compensate you, understand?"

The large stamping machine is a big pair of scissors, and anything can be pressed into a cake when placed underneath, since this machine was rented, Ji Dong's most common sentence is safety.

Those few vulcanizers, Ji Donglai also had a headache, except for a transfer machine, the rest are the kind of coal-burning, Ji Donglai will not want this if he has a little money in his hand.

is still short of money now, otherwise Ji Donglai would definitely change it.

A lot of things are easy to say, but it's not that easy to do.

Now Ji Donglai can only buy rubber raw materials refined by others, and the cost is still relatively high.

Now the price of polyurethane A material obtained from the outside is not low, fortunately, the other party is rushing to Swell's face, otherwise no one will agree to provide Ji Donglai with the original refined A glue.

The contractor can earn more and don't have to worry about scrap.

"Buzz!"

Lao Zhao of the lathe also started uninterrupted work at this time, because Ji Donglai was doing fine blanking, the consistency of the product shape was very good, the clamping was very fast, the inner hole of the threaded was almost one knife, and occasionally there were two knives The product was defective.

"Leader, this thing is best done with numerical control, it only needs to be used once, and it can be done in minutes. Let's do this with average efficiency! ”

Ji Donglai came over to check the size of the product, and Lao Zhao also stopped what he was doing and handed Ji Donglai a cigarette.

"Do you know how to do it?"

lit a cigarette for Lao Zhao first, and Ji Donglai touched his mouth.

"Yes, I used to do CNC before I left that old factory, and I taught the apprentice to kick me down!"

Speaking of his previous work experience, Lao Zhao was depressed.

In the past, Lao Zhao's boss was also a private boss, and he looked very good, and occasionally gave Lao Zhao some clothes that he usually wore, of course, he was also replaced by the boss.

Later, the boss brought his nephew over and asked Lao Zhao to take it. Lao Zhao didn't doubt that he had him, but after the teaching, the boss immediately found a small thing that couldn't be more small and opened Lao Zhao.

It is precisely because of this that Lao Zhao came to Ji Dong to work here and has always only been a general worker, and he has never taught anyone techniques. Of course, there are very few ordinary workers who can learn now.

"Okay, you come with me!"

Ji Donglai didn't think much about it, and directly brought Lao Zhao to Panasonic Park, with a row of machine tools in front of him, all CNC machine tools.

"Boss, this is good! Yamazaki Mazak, all hydraulic chucks, I can increase my efficiency by more than half ......"

Looking at the CNC machine tools, Lao Zhao's eyes lit up, as if he had returned to his apprenticeship, Ji Donglai nodded and called the squad leader here.

"From now on, this machine tool is taken by Master Zhao, and you can do whatever you are arranged, and don't have any rejection! If Manager Lu comes over, he will say that I arranged it! ”

"Master Zhao, just give guidance here, our construction period is relatively tight, you look at the arrangement, this is a long-term job!" You can make up the program, I'll make it up, we can get it! If you want to learn from the processing center over there, you can also find me, it's all our own business! ”

"I'll recalculate your salary for you, according to the CNC salary! If you train the students in this workshop well, I will give you the director's salary! In short, I want output, and you also serve in the machining workshop over there, and I will also give you money! ”

For workers like Lao Zhao who have a tragic experience, Ji Donglai treats them differently and tries not to let the other party be too concerned about him.

Lao Zhao nodded vigorously, in the past, there was no salary for taking apprentices, but now Ji Dong is coming to give money, which proves that people understand people.

Three salaries, even when I leave in the future, I am willing.

"Owner, don't worry, there is one person who won't, I'll chop my fingers! These kids aren't as dark as those guys, you know! ”

Many times the banknote ability is much better than those bullshit promises, and the minute old Zhao has already started to work.

Ji Donglai asked Liu Yupeng to arrange a car to pull the semi-finished wheels from the factory over and machine them directly in Panasonic Park.

With CNC machining of the inner hole, the tolerance of the diameter is almost the same, and Ji Donglai simply modified the center size of the forming mold, so that the positioning is also easy to do.

The next night, Ji Donglai began to form the guide wheel, accompanied by the vulcanizer slowly falling, and in seven minutes, the product was directly opened.

"Okay, just follow this! Insert all the cavities, take down the block and hand it to Master Zhao, let him continue to open the mold over there! ”

This time, Ji Donglai made plug-in cavities, after all, polyurethane is not all rubber, and the molding speed is much faster!

In addition, this correction of the mold is also much faster, the work here are all students and young people, the eyes are fast, and the maintenance of the mold is beyond ordinary people.

One mold has 48 cavities, one mold in seven minutes, and the output of more than 10,000 per day.

In the future, all the skeleton centers will be worn directly with a hollow light rod and placed in the yard, and gears will be installed at the head, and the chain will be driven by a chain next to it, driven by a reducer bought at the scrap station.