"I haven't worked in such a good environment for many years, there are no restrictions, I miss the feeling of the past!"

Da Qizi walked with his hands behind his back and Ji Donglai from one end of the factory to the other.

The huge factory building is 14 meters high, and there is an old-fashioned overhead crane on it, which has a natural advantage when unloading.

The foundation of the furnace was accelerated through the efforts of the workers, and the mixing plant transferred from Tashkent was being built around the clock, and the steel bars imported from the country were filled in without money.

The aluminum block mold is very easy to do, and the domestic opening is already on the way, and the rest of the small parts, the large-scale equipment base casting required for the synthetic ammonia project, Daqizi is all recommended to do it locally, which is one word: cheap.

"Master Qi, I'll leave it to you completely, you have cooperated with the former Soviet Union, you understand the dog temper of these people, I have pinched it, I rely on you to cook."

"You have a steady personality and they will like you. In addition, I asked people to dig a well in the local area, and the land over there is ours, and when there is nothing to do, we can grow some domestic vegetables, and if you can sell them, you can generate income, and if you can't sell them, you can eat them yourself. ”

"I've been here for a long time, and the biggest restriction here is that there are no vegetables, except for Piyazi or Caledo, and tomatoes are all-you-can-eat. After a long time, I'll get tired of it, I'll give you full autonomy here, I've seen some Chinese locally, if you can get a list from them, I'll give you a commission......"

While stabilizing the list, Ji Donglai didn't expect this list to make him much money.

The next step towards Chevrolet is the key, the steering pump and oil pump have successfully entered the Chevrolet, and if the casting side can still enter, it is really stable.

Da Qizi himself is a technical background, and with the steady character equivalent to an elephant, it makes people trust it wherever it is placed.

The initial list of scrap aluminum contacted by Xin Li was not much, but when the inspection was carried out, Ji Donglai was confused.

"It's all ours?"

Pointing to the pressed aluminum blocks of the entire fifteen carriages, Ji Donglai and Da Qizi were a little confused.

"It's all yours, and there will be so many more next month, and we're all talking about it."

"it!"

"Peat!"

"There are beans!"

"It's not like I'm going to eat anymore, I can choke to death!"

Looking at such a big car, Ji Donglai spread his hands at the big Qizi stall, but the big oolong over there didn't say anything, and took out the phone to shake people to transfer. The transfer of large aluminum blocks is definitely not as simple as words, the old-fashioned tractor pulls the body that I don't know what to pull, and with the crooked box board, Ji Donglai seriously suspects that this thing will fall apart halfway.

The driver of the car looks like a drunken Mengzi, what you say is OK, the location of the big oolong did not say that there is a want to set off, fortunately the worker's reaction speed is fast enough, otherwise it may not be where this car of aluminum goes.

One wagon of pressed aluminum blocks is less than twenty tons, which is transported by two large tractors. Behind it is the local Camaz flat-head truck, which is still the kind of old-fashioned product, and Ji Donglai now knows that such old equipment still exists in this world.

All the aluminum blocks were piled up next to the furnace like turnips, and the local methodical workers unconsciously began to speed up the progress in their eyes.

The roll mill from China began to clear customs along the Khorgos port, and this time Xin Li chose to take the goods from LYG, saving a lot of money in the whole freight.

This time, in addition to the imported pressed aluminum scrap, Ji Donglai also imported a lot of aluminum plates, and the overall price is much cheaper than importing from other countries.

The aluminum ingots are imported from Russia at the insistence of Daqizi, and they are all standard aluminum bars.

"Mr. Ji, the process here is actually not difficult, from here the aluminum strip is rolled into aluminum plate, and then I cut it here, then roll it round, and then we do a three-step stretching ......"

Don't look at a simple non-stick pan, the process looks uncomplicated, but it is very cumbersome.

From the scrap aluminum block smelting to the aluminum bar, the next step is directly into the roll mill for rolling, pressing into a fixed thickness of aluminum plate, then the cutting machine cuts into a small aluminum plate, and the next step is cut into a fixed round plate.

Then a two-step stretch is performed on the stretching machine, and this step is directly flanged by the way.

The entire surface is then sprayed with Teflon, and the next step is to use the waste heat of the furnace to cure the Teflon surface. Because it is gas-heated, the bottom of the non-stick pan has to be decorated at the end.

The handle mounting hole on the side of the press pot is simple, fixing the machine position, and matching the foot switch.

The stainless steel handle is simpler, the stainless steel rod exported from China is burned red in the furnace, and the next step is put into the mold, and the bending and handle punching are all formed.

Occasionally, there are substandard products, and the workers are too lazy to repair them, so they are directly thrown in the corner and waiting for them to be reprocessed and then reprocessed again.

The injection molding workshop of the handle of the high-temperature resistant plastic is next to the casting workshop, and the 48-cavity mold is very huge, all of which are imported from China.

Make a product, enough for three months of assembly here.

Every time the mold is preheated, it is directly next to the furnace, and Daqizi makes the best use of energy.

In the rubber parts workshop, Ji Donglai thought about it again and again, and it was still imported from China, and the production cost was really high.

"Boss, there's a boss looking for you here."

The machinery and equipment in the workshop are in place one after another, Da Qizi and Da Oolong are very busy every day, only Ji Donglai can sit in the office and drink tea, and Li Xiaojuan, as Ji Donglai's royal translator, is busy on the side.

The doorman introduced a person to Ji Donglai, and it was not until the doorman left that the other party removed the mask.

"Muller, what are you doing like this? My dear, sit down! ”

The person who came was the original purchasing manager of Uzi Daewoo Automobile, and Ji Donglai's steering pump and oil pump were brought in by the other party, and now the benefits have been seen.

"Mr. Ji, I'm sorry, but now the management is strict. I'm bringing you good news, our company's Chevrolet car steering parts were originally supplied by a local foundry company, and the previous stage was not the bankruptcy of Uzi Daewoo Automobile. ”

"The company went bankrupt, and we took some measures, and someone bought the right to operate the company, but the company couldn't produce it, so we purchased the corresponding parts from Russia and sold them to Chevrolet."

"But it's very expensive, and I've heard your workers say that you can do casting too, so I want to ask if you can do it? If we can do it, we can work together......"

Müller inherited the genes of all the great talents on the Uzbek side, and he always spoke in such a roundabout way.

Ji Donglai listened to Li Xiaojuan's translation for a while before he understood that the last company that supplied automobile casting parts to Uzi Daewoo was actually Huang, the company that supplied Qianqiao.

(End of chapter)