In the following week, there was no news of Stark's disappearance on the beetle's side, and Edward didn't dare to go out because of the black magician's persecution, so he stayed at home and sorted out all the powerful characters in the novels, movies, TV series, and anime he had read, even if the black magician fell asleep again, he could summon Saint Seiya, Ultraman, Transformers, My Little Pony, Doraemon, Hulu Baby, etc., to carry out inhumane group beatings against the black magicians.

He originally wanted to go directly to the New York Temple, even if it was better to lay on the floor than at home, but at the end of the dream, Gu Yi's sentence that he didn't need to find me blocked back.

Edward pinched his fingers, and he just took advantage of this to become proficient in armor making.

During the day, in addition to sleeping, he draws pictures, and the general idea of the two forms of Kamen Rider armor fighting slowly takes shape over the course of the week.

The forms of the armor fight are divided into the masquerade form and the knight form.

The Kamen form is a typical "extreme environment combat equipment", with excellent defense, even a sword made of diamonds can not hurt a bit, it is good at hand-to-hand combat, and it can lift up to 25t heavy objects for a long time with one hand - in this world, it seems that there are better materials to achieve better defense results.

The speed of the knight's form increases, the reaction speed is greatly increased, the strength is relatively reduced, and it can withstand temperatures from absolute zero to 5000°C.

Featuring a real-world example of falling from a height of 500m on the ground without damaging the loader, its special move, the Knight Kick, which can inflict a particle crashing effect at the atomic level - this is crucial, as it can directly destroy enemy defenses.

Of course, the above are all ideal effects, and at present, Edward doesn't know where to start restoring and creating a good armor series, let alone completing a comprehensive copy of the original effect.

On the other hand.

Kamen Rider Armor is not very statistic in the Kamen Rider series, but its signature acceleration skill "Clock Up" gives it a unique speed advantage.

The principle of Clock Up makes the tachyon flow cover the whole body, so that it is at a different speed of time flow from the surrounding one, and achieves the effect of high-speed movement by accelerating one's own time.

The speed of this state is not fixed, but is capped by the physical fitness and willingness of the transformer.

According to the records of the Time and Space Administration, the level of normal armor buckets generally starts at the speed of sound, and the normal standard is between several times the speed of sound to dozens of times the speed of sound, but there is no fixed index, and the Clock Up of the strongest armor bucket reaches the level of sub-light speed......

However, in the final analysis, this skill is caused by accelerating the flow of time itself, and using too much will lead to rapid aging - imagine a normal person's 1s, but you have passed more than ten minutes, half an hour, once or twice, it is not much, but the number of times is more, and it is very scary to add it to a month or two, a year or two years.

In addition to Edward's time-stop principle, the same is true, the world time stops moving, and its own time remains normal, and the two are superimposed, and the time consumption will be very large.

As a member of the Time Authority, Tid naturally has a solution, the only problem is that Edward can't accurately control time now, let alone solve it, he is a little afraid that Clock Up may also bring him time reversal.

The time reversal of its own time stop, and the difference in the internal and external time flow rates caused by the time stop, which led to the rapid aging of the body, were handled by the "Eater" system, but the Clock Up of the armor bucket is still unknown.

Coupled with the extremely complex data of Clock Up, Edward did not rush to enter it.

Because of the surveillance, from time to time worried that someone would break in, Edward's work efficiency is not high, and the work is only the simplest ten percent of all the work procedures to start designing.

This is not just a good look at the drawing, the design of a part must consider both the internal and external problems.

The exterior of the armor needs to be defensive, and the thickness and streamlining of the exterior armor need to be determined according to the materials used.

Inside the armor is a more complex "transmission", and the basic function of the transmission system is to transmit the power emitted by the engine to the driving wheels of the car, generating driving force.

Applied to Iron Man armor, it is to transmit the energy of the "Ark Reactor" to various parts of Iron Man armor, generating driving force and allowing the armor to operate.

After all, it is made of metal materials, and no matter how light the weight is, it is "132kg" and "95kg", and wearing such a heavy thing is equivalent to pressing a big fat man on a person.

So the transmission system is very important, if the transmission efficiency is poor, it is equivalent to walking with a big fat man on his back and fighting with a big fat man on his back!

That's exhausting!

The internal transmission is one thing, but also to consider the functional design of each part, heat dissipation, shock absorption function, and some parts have to be stuffed with some strengthening protection devices, energy transmission devices, and power burst devices......

So many functions cannot be added by directly clicking the "Add" button, and related functions require related components.

For example, when a large system is running, it will generate heat, and an ordinary computer will have to dissipate heat after a long time, let alone an armor?

If you want to dissipate heat, you have to have heat sinks, right?

You have to defend against the opponent's attack, this is not only the armor can resist so simple, the wearer will also be forced, if the armor hardness is enough, but the shock absorption is not good, there may be armor is fine, the wearer is shocked to death first.

So in order to reduce the force, you have to absorb the shock, right? It has to have shock-absorbing materials, right?

If there are too many functions in one part, this part will appear bloated, and if there are too few functions, it will become a flaw, so how to coordinate the proportion of functions should be carefully calculated.

This precision cannot be adjusted air-to-air and must be estimated based on the "material" used.

Unfortunately, Edward didn't have any materials, so he asked the beetle to find a small laboratory material library and copy some materials and data.

For example, the physical properties and chemical properties of each metal, as well as some experimental data, one is counted as one and all copied away, anyway, Edward has nothing now, whether it is useful or not, it is not a loss to take it first.

Then use the beetle's own computing power to compare the metal materials that may be used one by one, check whether they can be used, and then check whether the two metals are suitable when put together if they are used, and whether there will be any negative effects.

Compare them one by one, try to find some metals that are more suitable for your needs, and then use the computing power of the beetle to coordinate the proportions for calculation......

So many parts are crammed together on the hardware side, and there has to be software to control the situation of each part, and these control systems also need to be programmed, and the more functions, the more they need to be programmed.

Then you have to set up a backup to avoid bugs, and it would be nice if this backup could be different.

After all, some bugs may be their own problems, so you can replace them exactly as the original, but if you meet Batman and stuff a virus into the system, do you want to use the original one instead of looking for death?

With so many things crammed together, Edward is a newbie again, and all kinds of things are in a hurry.

Edward was busy for a week, and he completed a quarter of the simplest designs of Kamen Rider Kamen Form's hands and wrists, and completed everything else in bits and pieces.

Despite efforts to compress sleep time, with less than three hours of sleep per day, the current overall completion rate is 2.94%.

This 2.94% is 2.94% of all the easiest 10%, and normally Tead can complete this 10% in two days.

After the final blueprints were taken and burned by the beetle, Edward rubbed his temples.

After the design drawings and data derivation process were completed, they were entered into the beetle, and his handwriting burned after entering.

After all, it is necessary to prevent the sneak attack of Dark Magic, Hydra, and S.H.I.E.L.D. to obtain these blueprints.

But it's not like nothing is left.

Edward left some special paintings, pencil drawings of landscape landscapes.

Edward took the time to paint a bunch of landscape paintings of his "hometown" to prove it, and this hometown is Edward's hometown in this world - Suzhou and Hangzhou.

Because this is a young man with amnesia, the appearance of the West Lake above is very strange and stumbling; Because he was afraid of being caught, he was trembling all the time, and there was a noticeable pause every once in a while because he was afraid that he would be caught.

These are still formed, and various paintings that are not formed are also prepared, a thick pile is scattered on the table, which mainly highlights Edward's incomplete memory and even remembers his hometown, and there are often obvious pauses and shaking marks on the paintings, which reflect Edward's fear of a foreign land and the like.

Edward took out the reading comprehension efforts of the year and laid them out to the people who monitored him.

"It's boring."

Edward nibbled on the compressed biscuits, sorted out some of the results of the week's hard work, rubbed his temples, looked at the quiet sunlight outside the window, indulged in it for a long time, and when he reacted, he jumped up, put on his clothes, and walked out of the house with the beetle.

Stark hasn't had an accident yet, so instead of waiting, it's better to do something in this free time.

“！！” Wait, why do you have such thoughts?

Why is there the idea of "going out and relaxing before the enemy comes" when you are at home and waiting for work to meet the enemy from afar, and just entering the armor data in one fell swoop?

Edward thought for a moment, and the thought of "going out to breathe" once again came to his mind.

Someone is interfering with his thoughts!

Edward thought for a while but didn't think of what means were used on the other side, and when it interfered with his thoughts, a little annoyed, he took out the amulet, this amulet did not respond, did he not know, or pretended not to know and let it be?

Edward thought for a moment, held the amulet in his hand, and read his thoughts silently.

Why don't you take advantage of the situation, with the ancient one behind, maybe you can annihilate the black mage in one fell swoop and eliminate this worry - the black mage stared at Rumang's back, let Edward be restrained in whatever he did, she would not be destroyed, Edward was uneasy.

Then it's better to go out fishing first, give her a chance, and see if she is tempted.

At this moment, a blue light flashed on the amulet.

"Yes."