On February 5th, I officially went to work today, and it is estimated that the work of adjusting the machine tool will also begin.

Sure enough, as soon as I arrived at the workshop, I was called to the office by the director, and after the arrival of the technical department, we discussed the order of maintenance and adjustment.

"Xiao Li, this is Wang Gong of the technical department, cooperate with us to maintain and adjust", after the director introduced the two sides, he said: "Xiao Li, how long is the guide rail adjustment of a machine tool estimated."

"Depending on the wear, the degree of trimming varies and the time required is different. Scraping and polishing requires a lot of energy, and the consumption of spirit is too great, this is a continuous operation, so it is recommended to have one per day, so that I should be able to fight continuously", with Li Guocheng's perverted body, there is no problem with two units a day, and one unit a day is enough to shock the world, if it weren't for the previous maintenance TK-200 that exposed its strength, it would definitely be said that at least half a month.

"Okay, just one a day, I'll arrange shifts, Wang Gong is responsible for command and recording, and Master Yi Zhonghai is responsible for assembly", the director clapped the board and said, amazing, the assembly technique of the level 8 fitter, that is something you can't learn if you want to.

"There is no problem," Li Guocheng and Wang Gong both agreed.

"Then start with group 1 and I'll take you there."

Starting today, Li Guocheng began an eight-month guide rail adjustment task, going to and from work every day, two points and one line, and focusing on work.

Every time he completed the trimming of a guide rail, Li Guocheng pretended to have too much mental consumption, hid in Group 6, and did private work in the name of rest and help.

On the first day of maintenance and adjustment, I followed the director to group 1, which was also a horizontal machine tool, Wang Gong did not look at the drawings at all, and had already memorized it, and directly guided Master Yi to disassemble, answering Li Guocheng's questions while guiding, and then both of them saw Li Guocheng's intention to learn, and began to explain while dismantling.

Wang Gong can also be disassembled and assembled, but compared to the 8-level fitter, it is not a star and a half, after all, there is a specialization in the art industry.

It's not that Wang Gong has nothing to do, strong affinity, high dedication, you try to change ordinary workers, see if Wang Gong Li you don't. The reason is that Zhang Gong has seen the maintenance and operation of KT-200, and he is amazed by Li Guocheng, and he loves talents, just like the older generation of revolutionaries, he loves his country deeply, so since he has encountered good materials, he wants to cultivate talents for the country.

With the increasing accumulation of Li Guocheng's cultivation, his memory and comprehension now feel perverted, and after Master Yi completed the disassembly, Li Guocheng had already built a three-dimensional assembly diagram in his mind, and the disassembly process was also optimized.

Then it was time for Li Guocheng's performance, carefully observed, stroked the texture of the guide rail with his hands, and after completing the modeling work, he also had a polishing plan, took out a big file, and went down with a knife, so that Wang Gong and Uncle Yi were so shocked that they almost sat on the ground, fortunately, everyone knows that do not disturb each other when finishing, so as not to cause excessive polishing. With the flying of the file, Li Guocheng did not use other auxiliary tools throughout the whole process, it was a file, and the two were even more frightened, not for the example of KT200, the two had already stopped, and they had never seen such a thing.

But what surprised the two even more was that the finished part was very flat visible to the naked eye, without the imagined unevenness.

One of them holds a level and the other holds a right-angle steel ruler to check the levelness and flatness of the finished part. After measuring once, they looked at each other, and measured repeatedly without believing in evil, and finally determined that this was true, and the levelness and flatness were completely qualified. It's just a big file, how perverted it must be, eyesight and calculation, and the two of them are scorched by thunder.

Think about the past, such a job must be a fitter above level 5, work for 1 or 2 months to complete, it only took a long time, almost half an hour, half of the completion. What they didn't know was that Li Guocheng had slowed down the pace, otherwise it would have been completed by this time.

After an hour, the entire guide rail is roughed. Li Guocheng changed to a shovel blade and began to scrape and polish the surface, still without auxiliary tools, and the two people next to him were already surprised, silently waiting and looking confused.

Another hour passed, and the guide rail with beautiful patterns was completely completed, and the two of them measured it repeatedly with auxiliary tools in a responsible manner, perfectly, without any flaws. Both were numb.

At this time, under the guidance of Wang Gong, Master Yi Zhonghai began to assemble.

Master Yi also lay down completely, such a demon must not be evil, he must be good.

Therefore, Master Yi also explained the key points and know-how of assembly while assembling, just like the completion.

After today's maintenance task was completed, the two walked to the director's office to report their work, and there was another confused goose.

When Wang Gong returned to the technical department, there were a few more stunned geese.

Li Guocheng went to the director's office, and took advantage of the director's confusion to get the approval slip for buying leftovers at his own expense. Then I went to the finance to pay the money, and then took the approval slip to the logistics warehouse to get a large piece of leftovers, and returned to the 6 groups of stations.

"How's it going, is work going well today?" Zhang Tou asked with concern.

"Master, it's very good, Wang Gong and Master Yi have taken good care of me, and they have learned a lot, but it takes too much energy", Li Guocheng replied sincerely.

"That's good, be humble and cautious, guard against arrogance and rashness, practice your skills well, you can slow down the pace, don't be reckless" full of concern.

"Okay, listen to you, you must work hard, study hard, and protect yourself."

At this time, the workers also greeted Li Guocheng from afar, and now Li Guocheng is different, he has become the director's celebrity, and everyone's mentality is no longer the same, and Li Guocheng also knows it.

Pretending to sit down and rest, after taking a few sips of water, he stood up and prepared to sharpen his throwing knife, choosing to imitate the multi-purpose bayonet on the Type 95 assault rifle of later generations. The Type 95 bayonet is the M9 bayonet in the United States, and in addition to the basic bayonet function, it can also be used as a fighting dagger and a wilderness survival knife. The Type 95 multi-purpose bayonet has been partially corrected in the shape and texture design of the grip, and its blade has the function of assassinating, chopping, sawing and filing, and has the function of cutting the barbed wire when cooperating with the scabbard; There is a knife bridge in the middle of the knife on the right side, a larger filing area above the knife on the left side, a small whetstone on the back of the rear scabbard, and a simple screwdriver and corkscrew function design at the bottom of the scabbard.

Because the use is for throwing knives and fighting, there is no imitation of the scabbard.

Special steel is also recycled and stored as scraps, so there is no special steel at all, so Li Guocheng plans to use ordinary steel strip scraps to make it, and the handle is carved with wood in the secret realm after returning home.

An hour later, 6 beautifully made Type 95 bayonets without handles appeared on the workbench, and to see that the time was about the same, they put the tools and knives into the toolbox, cleaned the finished position, and went home from work.

After eating, I took out a piece of wood with a golden and warm color, a dark reddish-brown heartwood, and a texture of repeated horns, and began the carving of the knife handle according to the appearance of my heart, and the whole six knife handles were exquisite, which can be called a work of art.

Put away the knife handle, clean your hands, continue to study Mao Xuan, and write down your experience in a notebook, almost 10 o'clock, and go to bed.

Ask for recommendations! Ask for a commuter pass!