After the fire source in the furnace was completely withdrawn, Iron Fire took a hammer and smashed a hole in the "big chimney", and then people were able to see the internal structure of the chimney, which turned out to be divided into several partitions.

The top layer is the iron selected by the disciples, under the high temperature firing, the iron will melt and then drip to the second layer, and the iron that falls on this layer is not only more refined, but also mixed with some special substances in this layer, and then infiltrated and dripped down after being dissolved by heat.

The iron material needs to go through nine layers of purification until it falls into the bottom layer and becomes the iron tire that Tie Huo wants to use, but this process is so troublesome, which shows how complicated the process should be to build a weapon in the Xuan Bingfang, no wonder these craftsmen can be so courteous, they really play the fire to the peak.

Tie Huo looked at the admiring eyes of everyone and enjoyed it very much, if the conditions here were simple If these people were allowed to go to the workshop, wouldn't they be shocked to drop their jaws, after all, the materials used to refine materials in the workshop were the best Ding furnaces, and if they wanted to be promoted, it would not work if they wanted to rely on their qualifications, but they still had to see the number of Ding furnaces that could be mastered, and only those who could master Jiuding were qualified to become master craftsmen.

Iron Fire was not blindly self-intoxicated, but he picked up the ashes at the bottom of the chimney and scraped out a few iron lumps, which were all refined iron tires, and saw Iron Fire smear special plaster on these iron tires, and put them in the furnace to smelt again.

And at this point, Yun Hao, who had been meditating and recuperating his mind, suddenly stretched his waist, and then took out a three-legged tripod from the wrench finger in his hand, the shape of the tripod was simple and solemn, and this kind of utensils have always been used as ritual weapons, but Yun Hao's three-legged tripod is strange and there is still a flame burning inside.

As a master craftsman, Tie Huo naturally has requirements for the fire needed for smelting, and the Jiuding of Xuanbing Fang has different flames, and the corresponding is to use different flames to forge different instruments, so when Tie Huo felt the blazing flames in the three-legged tripod, the brilliance of both eyes came out.

And Yun Hao then took out a few pieces of cold iron and threw them into the three-legged tripod, these cold irons were obtained from the chains on the legs of the golden crow, and now they came in handy, and the cold iron was also refined when it was forged into chains, so Yun Hao's smelting was just to facilitate shaping.

Iron Fire knew that the flames inside the three-legged tripod were unusual, in Cangwu

There are three types of fire on the continent that can be used by blacksmiths, one is the combustible materials obtained from plants and minerals, such as charcoal and lotus coal, and the other is the use of natural power to borrow lava earth fire, which is also the source of the high-level fire that Xuanbing Fang now uses.

This last one is beast fire, some of the demonic beasts will have flame attributes, but this is just a legend, after all, no one has owned, but it is said that the owner of the Xuanbing Workshop once got a small bottle of the endless sea's 'merman' oil, this kind of oil can burn for a long time with a drop and is not easy to extinguish, so the yearning and pursuit of the beast fire has never been interrupted in the Xuanbing Workshop.

Now when he saw the flames in Yun Hao's three-legged tripod, Tie Huo immediately thought of the possibility of beast fire, so the first thing to do was to confirm what the attribute of this fire was, the ranking of the sect list was not a sort to be fought for, if it was really a beast fire in the three-legged tripod, even if it was deliberately admitting defeat in exchange, it was okay.

Before the source of the fire is clear, the work in hand cannot be stopped, and the competition is still going on, and you can't be careless until there is no winning chip.

Iron fire has taken out the red-hot iron tire from the furnace and put it on the anvil to beat it, for the forging repeated beating is the key, the red iron tire with the rhythmic sound of the knocking on the anvil constantly changing this form, layer by layer of black impurities also peeled off with the beating.

Folding, hammering, folding, and hammering, an iron tire was gradually forged out of the prototype of the weapon, and after repeated compression and extension, the iron tire of the weapon has been extremely tough and strong.

For this work that is about to be completed, Tie Huo is still very confident that he can defeat Yun Hao with it, although there is no suspense before this competition has started, but Tie Huo has never been sloppy about forging weapons, as long as he stands in front of the hearth, he is a blacksmith, followed by the master craftsman of the workshop.

"Ding、、、 Bang, Ding、、、 Bang, Bang、、、"

The sound of percussion was still coming, and the disciples of the Xuanbing Workshop who were watching watched every movement of Tie Huo with extremely admiring eyes, and sighed from the bottom of their hearts: "One hammer three times in a row, it really deserves to be our master craftsman." ”

This remark immediately attracted the echo of all the disciples, and it seemed that it was almost announced that it was Tie Huo who had won.

Sought after Tie Huo has been greatly satisfied, but Bi

As a craftsman, he still knows how to exercise restraint, and he observes Yun Hao's movements from time to time, wondering what method he will use to forge weapons.

And while Tie Huo was looking at Yun Hao, Yun Hao's eyes were also on his side, because Yun Hao wanted to observe the process of forging his weapon, and it was a detailed process, and he would not miss any details.

At this time, the weapon in Tiehuo's hand was also at the end, and in the final quenching stage, I saw him put the weapon that was not covered with mud except for the blade into the water tank, and with the sound of 'bang', a large amount of water vapor came out of the water tank.

The weapon forged by iron and fire has been formed, just wait for the polishing and polishing to be completed, and then look at Yun Hao's iron material is still refining in the three-legged tripod, and Yun Hao has no tools, if he doesn't connect the pliers to the Xuanbing Fang, I'm afraid that he won't even be able to take out the iron tire.

When Yun Hao saw that Tiehuo had already begun to polish the weapon, he knew that this was also the final step, and it seemed that he could also start forging the blade, so he immediately took out a relatively flat piece of cold iron from the ring of square inches to use as an anvil.

Then Yun Hao took out another thing, it was a broken sword, this was actually the 'Huangquan Sword' that Yun Hao picked up on the ground after pushing Li Chunyi into the dark cyclone earlier.

The broken sword body and hilt of the Huangquan sword are forged in one piece, Yun Hao picked up the sword and inserted it into the iron tire in the three-legged tripod, and when the iron tire and the sword body began to fuse, Yun Hao took it out and put it on the anvil.

Just when everyone was wondering what tools Yun Hao was going to use to forge it, they saw Yun Hao raise his fist high, and he didn't know when he actually brought a pair of gold wire gloves on his fist, and then what was even more surprising was that Yun Hao actually used his fist to forge iron tires!

Forging hot iron tires with flesh and blood?!

Whether there is a need to learn such a method is one thing, but there are really few people who can do it, to say that the destruction of the people present, smashing an iron tire may not be nothing, but to let these people use iron tires to cast objects, no one can do it, because as long as it is in contact with such a high temperature, the protective qi will directly break and burn the skin and flesh.

So no one has made such an attempt, because there is no need for it, after all, the purpose of using a hammer is to increase efficiency, and using a fist is not putting the cart before the horse.