Of course, when the Internet media took the lead in reporting the relevant news, the paper newspapers and TV media were not far behind.

Among them, it is worth mentioning that the world's strongest news and propaganda channel, TTCV new article simulcast also took nearly 4 minutes.

With a shocking tone, it reported the news that Shuguang Technology solved the 90-nanometer chip production equipment and successfully produced the first purely domestic 90-nanometer chip.

Among them, the names of Academician Lin Chen, Academician Ni Guangnan, Academician Lu Ke, Academician Guo Ling, Academician Gu An, Professor Xu Duangu and other meritorious officials frequently appear in the TTCV new article simulcast......

Suddenly, Lin Chen, those academicians and other meritorious people in the process of semiconductor equipment research and development can be regarded as famous throughout the country.

It can be said that the popularity and prestige of those academicians completely overwhelmed the other Daxia academicians, and they have truly reached the pinnacle of life!

After all, although they have become academicians before and have reached the pinnacle in the academic field, they are not well understood by the common people in the people.

And this time, as Daxia completely solves the problem of 90nm process technology, the credit of these people is naturally mentioned.

In this case, they also entered the mouths of the common people in a real sense, and really let the people of Daxia recognize them.

In addition, it is worth mentioning that Professor Xu Duangu has been able to win the title of academician after this R&D achievement and the previous R&D achievements.

But unfortunately, the selection of academicians requires a fixed process, so it will take a little time for Professor Xu Duangu to be named an academician.

However, these are things for the future, and the focus of people's attention at this time is not on the fact that Professor Xu Duangu is going to be rated as an academician.

They were talking about Da Xia's solution to the 90 nanometer process process, and what it meant for Da Xia......

And the overseas media is also quite uneasy.

Their media either reported on the rise of the semiconductor industry in Daxia in a shocked tone, or reported on the rise of the semiconductor industry in Daxia in a frightened and worried tone.

For example, Silicon Valley Daily, the mouthpiece of Silicon Valley Semiconductors, used "Daxia has fully broken through 90 nanometer production equipment, how should the semiconductor industry of Medigo go in the future?" The title of the article.

This article pointed out in a panicked tone the fact that the equipment used by Dawning Semiconductor to produce 90-nanometer chips is all domestic equipment, and explains what this represents.

The final conclusion is naturally unsettling, because it means that Daxia has kept up with the progress of the world's semiconductor manufacturing process.

It also means that it has become difficult for them in the West to continue to be far ahead of the Great Xia by virtue of their manufacturing technology.

Although the Western 65nm process technology has now come out, the 45nm process process is being developed.

But how long can the West continue to lead in chip manufacturing technology? It took less than two years for the Great Xia side to advance the process to 90 nanometers.

Give them another two years to advance to 65 nanometers or even 45 nanometers, which is bad news for the whole West.

However, when the Western media focused on Daxia's breakthrough of the 90-nanometer process technology, the focus of the news reports of the two countries of Deyizhi and the island country was not on the breakthrough of the 90-nanometer process technology in Daxia.

Rather, it lies in the nanotechnology of the surface of metal materials and the Dawning five-axis machining center, because they are two countries that are precision machining powers.

Companies in various countries around the world want to produce and process precision machinery or parts, and they usually look for companies in German or island countries.

So if the nanotechnology of the surface of metal materials and the Dawning five-axis machining center are true, it means that they are about to usher in a devastating impact on the processing industry!

The reason why it is said to be a devastating shock, not an impact, is because they are deeply aware that the Great Xia Kingdom will often turn a good high-end profit into a low-end profit.

Once Daxia enters the precision machining industry, it will be very difficult for the precision machining industry in Germany and the island country to continue to maintain high profits, which is not bad news.

Under such circumstances, the media in these two countries are also quite hostile to the Dawning R&D Center, and when reporting news in this regard, they are all in a hostile or unbelieving tone.

For example, Professor Daisuke Matsuda of the famous university "Todai" in the island country spoke in the Tokyo i Daily newspaper to refute the fraud of the Akebono R&D Center.

It is claimed that it is impossible for the Shuguang R&D center to really overcome the five-axis machining center technology, and that the five-axis machining center is absolutely a fraudulent product like the "Hanxin" of Daxia back then.

Among them, the "Todai" professor named Daisuke Matsuda also found many "doubts" in order to add convincing force to his words.

He pointed out that Lin Chen only announced the simple information of the Shuguang five-axis machining center, and the specific hardware parameters and even the principle were not announced, which was really unconvincing.

Of course, the more important evidence is that Professor Daisuke Matsuda presented the results of his information after checking it at the patent office of the island country.

The results of that information show that Sugon Technology is indeed developing a five-axis machining center and has registered thousands of related patents.

However, Professor Daisuke Matsuda found that these patents were only minor patents, such as shape patents, general structure patents, software control method patents, linear motor patents and other minor patents.

These thousands of patents seem to be fine on the surface, but in fact, they are missing the most important and critical core parts.

As for what is the most core part of the technology patent, there are many of the core part of the technology patent.

For example, the details of the internal structure of the five-axis machining center, which cannot be seen from the outside, such as the core code of the CNC system.

For example, how to process the spindle processing technology of high-precision spindles, such as how to produce high-precision cutting tools......

There are many core technologies of Shuguang five-axis machining center that have not been registered for patents, and they are only registered for some things that can be seen by the outside world, and the core part is not registered.

In this case, the most important core technology patent has not been registered, which does not make people doubt whether the Dawning five-axis machining center is real or fake.

Of course, in addition to this, Professor Daisuke Matsuda also used a series of industry data and the situation of a certain company.

He pointed out how difficult it is to build a five-axis machining center, and pointed out the fact that the research and development difficulty of a five-axis machining center is not much worse than that of a lithography machine.

Therefore, Professor Matsuda's article directly claimed that the Shuguang R&D Center was a fraud, and Daxia did not really make a five-axis machining center!

The so-called five-axis machining center is just a PPT, just a product of defrauding Daxia R&D funds!

I have to say that although this article is a bit biased, the doubts and difficulties he pointed out are indeed very convincing, and finally add the expert status of the professor of the island country "Dongda".

After reading Professor Matsuda's article, many readers in the island country also felt that the Shuguang R&D Center was a fraud and a fraud of funds!

(End of chapter)