Chapter 217 Production of forklifts

One afternoon, Luo Cheng felt that he was looking for guilt, and the female workers of the drawings couldn't understand it, and this ability to accept it was fast and slow.

Fortunately, it is spare parts, Team Leader Jiang and they have seen the drawings for many days, and now there are drawings at home, and they can also teach. Luo Cheng called Team Leader Jiang and they came to teach, including himself, and the four of them were teaching the female workers.

If you don't call Team Leader Jiang and them over, Luo Cheng will teach them to assemble each accessory once in the afternoon, and they may not be able to assemble it themselves.

There are not many opportunities for female workers to try their hands, because not many accessories are produced. Everyone memorizes one part, and you can't remember it just by looking at it once. But there are accessories assembled by Luo Cheng and Team Leader Jiang, which can also be used as a reference. There are really still those who haven't understood the model, so let Team Leader Jiang send another person to guide me tomorrow.

Today, in addition to teaching female workers to assemble spare parts, another is grouping and numbering. A part has a number, and the spare parts produced next time will also be classified according to the number, which number is handed over to which number group for assembly.

So at the beginning, these female workers only need to remember how to install one of their parts, and then someone will come later, and this group of workers at the beginning will teach the followers.

It is impossible not to leave early, and Luo Cheng left ten minutes before leaving work.

After returning home, it was still Mr. Huo, but Luo Cheng didn't study the drawings anymore, and now there is no pressure to look at the drawings. It's still interesting to read famous books, and it's better to look at the drawings after dinner.

"Luo Dalang, drink the medicine."

"No~~, let's leave, let me go."

"Where can you run without the power of a chicken."

~~~~

"Brother, it's time to eat."

Hearing the sound of shouting for dinner, Luo Cheng woke up suddenly, I went to see that I was still asleep and asleep. He found out that he was a coward in his dream, clearly thinking that he was going to kill someone. But his own behavior is a frightened begging for mercy, which is really aggrieved.

When he got up and went to eat, the rice was all ready, and after looking at the dishes on the table, Luo Cheng couldn't help but ask, why these days, every day is cabbage or radish, and he is a little tired of eating.

But Xiaoyu's reply was that there were no more vegetables to sell this season, and now there were still Chinese cabbages, and after a while, every household would have to store Chinese cabbage.

Luo Cheng thought that he had always stored Chinese cabbage in the northeast, and he had never heard of it in the south.

In fact, in this era, the south also stored Chinese cabbage like the north, and also hid radishes and the like. In later generations, southerners did not feel this way, because the winter in the south was just not as cold as in the north, and the cycle was not so long. In the north, at this time, it is almost ready to start storage, and it is generally necessary to prepare vegetables for two months. The south is just short of time to prepare, and the number is naturally small, just prepare half a month before the Chinese New Year.

There are still leafy vegetables for sale, but there are not many, and some uncles and aunts who don't go to work go to line up early in the morning, and they can't grab them at all. There are vegetables with leaves in the factory canteen, because they are ordered and supplied directly, and after a while, the canteen may be cabbage and turnips.

"In the future, there will be other vegetables in the cafeteria, so I'll bring one or two every day. This cabbage radish will be eaten again when there are really no other dishes in the future. ”

"Brother, why don't I get up early tomorrow to buy and queue up to buy food."

"No, it's not a little bit of money, and the chefs in the canteen have a good taste and texture in the stir-fry."

To buy a pound of vegetables, except for Chinese cabbage and radish, other leafy vegetables cost at least two or three cents. Buy a vegetarian dish in the cafeteria, but that's the price. But the vegetable soup in the canteen is watery, and one pound of vegetables can be sold for three servings. Of course, the cafeteria has oil and salt from the dishes.

The factory canteen originally relied on vegetables to earn money, and a pound of rice would earn you a penny, and it would not lose anything to help you cook well.

In terms of taste, it is good that a rural girl can cook it with Xiaoyu like this, but it is delicious. The others nodded involuntarily when they thought of the food in the cafeteria.

After the meal, Luo Cheng washed up and immediately went back to the room, there was a brazier in the room, and the temperature was warmer than the living room. First look at the drawings and then read the book, I have to say that the charm of the text, the image of the surname Pan is not serious. Let Luo Cheng write, if there is no such text, it may be Xiaohuang ~ Wen.

In the early morning of the next day, Luo Cheng rarely got up a little early, but it was a little bit. At least when Xiaoyu and the others went to work, he was out of the room.

According to the normal situation, all the drawings of the engine will come out today. Although the drawings came out, the engine had to wait for it to be produced. But at least the system has been liberated temporarily, and it has not been relied on the system to improve food for a long time, and there is still a soft-shelled turtle in the system, and Luo Cheng doesn't want to fix this yet.

When I went to the factory today, I found that the new construction site had started again, and the construction of such a plant did not need design drawings at all, and there was no need for specific planning, it was roughly said that the foundation was excavated in one place. There will be a wide space on the side, and you can pass cars and trucks. Don't save land, land is not worth much now, if you want to expand, you can give land directly.

After saying hello to Section Chief Zhang, Luo Chengcheng went in and went straight to the research room, and the drawings were in hand.

In the research room, Luo Cheng actually saw Gao Ru today, and he hadn't seen him for a few days, and he felt that he was a little less green than before.

It was very simple for her to return to the automobile factory, and the balance ratio data of the forklift came out. This is not a difficult thing in the first place, it is very simple to calculate if you understand, and if you don't understand it, you can only use items in a rigid way to measure slowly.

However, the data given now is only a 2T heavy motorized forklift, according to Luo Cheng's requirements, she has to go to the school's scientific research room to continue to calculate the comparative data of other forklifts of various weights. If Luo Cheng produces forklifts with the same structure, it is impossible not to produce other types. Unless the horsepower is not enough, the produced car will not be able to fork the desired data weight.

So what are you waiting for, and then the meeting, it just so happens that Director Zhao is now in charge of the handover and placement here. Isn't there a lot of high-level sheet metal workers, blacksmiths, and operators in military factories?

The forklift style that Luo Cheng planned was the body shape of later generations, and at least the four corners were the overall body with rounded arcs. It is definitely not comparable to a car, but this forklift has a thick body and is not operated by a machine, so Luo Cheng wants to see if these senior workers can create the shape body he wants.

At the meeting, continue to let Xu Haitang of the Propaganda Department use the loudspeaker to inform the meeting, and the automobile factory is about to launch a product again. If this car is built, Luo Cheng doesn't want to arrange every step by himself. It is best to hold a meeting to directly negotiate with each other, and when the time comes, who is responsible for what, all departments work together to quickly build the forklift.

Taking advantage of the time when everyone was still preparing to come to the meeting, Luo Cheng also simply drew the shape of the forklift on the blackboard in his office. Of course, there were sketches before, and drawing them on the blackboard was to make everyone intuitive.

The people at the meeting will be there soon, and it doesn't matter if they can make a difference, it doesn't matter if you want to say it, in fact, every department has a relationship. For example, the personnel department has to recruit people again, the logistics department must be responsible for the procurement work, and the workshop department must be responsible for sending a group of people to overcome the assembly task.

The repair workshop is not involved in this matter, but there is something to arrange here. For example, the five trucks and two jeeps that are about to come. The installation of shock absorbers and booster pumps needs to be completed by them, and other people's cars are left alone, and the cars in their own factories must be driven well.

Even if Luo Cheng wants to make an engine, the first thing is to transform the jeep, give up the rocker car key start, and start it easily in the form of a key.

As for the truck, it can't be modified for the time being, the engine horsepower does not match, and the high-horsepower has to be produced.

The drawings brought back by Gao Ru, Luo Cheng asked all departments to circulate them first, and while everyone was looking at them, he announced that the forklift was about to be produced.

The team leader of the operation workshop looks at the parts that can be produced in his own factory, or what machines need to be added to produce them. The fork is directly produced by the rolling mill, and it can be produced there. But the hydraulic structure on this car, gear wheels, etc., can be produced by the machinery factory, but the machinery factory is not a processing plant, and it still has to be produced by itself.

Director Zhao is also looking at the data on the drawings, the thickness of the plate and the required modeling angle. I was also thinking about how to build a semi-monolithic body, and after looking at it for a while, I knew that the current stamping machine could not reach such strength. However, the manual calcination method can meet the requirements, that is, in this way, the production speed can be very slow. It's easy to be boxy, but the forklift arc of the drawings looks very pleasing to the eye, and there are some things that he also came for multiple purposes.

It doesn't look very important, but it's often good looking at the first glance. It's worth the effort to make an export.

(End of chapter)