Chapter 15: Li Fan Strikes Again

Chen Jianguo, an eighth-level engineer, said.

"Deputy Director Li, don't worry, I'll take a look first."

"I'll see if there's a chance of a fix."

Huang Jianming, an eighth-level welder, said.

"I'll also see if there is a possibility that it can be welded."

Together, the two walked towards the broken drilling machine.

Chen Jianguo saw the broken drilling machine.

His whole face was not good.

How can Nima's break reach this level?

The entire operating panel is directly and seriously disconnected in the middle.

He shook his head and said.

"It's been repaired, and this operation panel is scrapped."

"What kind of beast machine is this?"

"At first glance, it is the result of long-term lack of maintenance."

"You must punish a person like Deputy Director Li."

"It's just a moth in the factory."

"It's tens of thousands of machines, so let him use it badly."

"His grandmother's, this one is thousands of years old."

He was very angry.

Such a machine was not easy to come by, and it took them a lot of effort to get it.

I didn't expect the workers below to know how to cherish it.

It's disgusting.

Huang Jiancai looked at the broken place and said.

"The success rate of this fix is not high."

"There is only a 1 percent possibility, which is equivalent to not being able to repair it."

"Engineer Chen is right, such a person must be punished and punished."

"Someone must pay for him."

Deputy Director Li was furious when he heard that the result was so serious.

"His grandmother's, this dog's Yi Zhonghai."

"Such a good machine just let him go."

"When he comes back, make sure he loses money."

"But the two masters, can't you really try to fix it again?"

Chen Jianguo and Huang Jiancai shook their heads and said no.

Director Wang learned that such a big thing had happened in the workshop he managed.

He hurried over.

Hearing the news that the drill machine was not repaired, he almost collapsed on the ground.

Grandma's Yi Zhonghai really hurt herself.

This brute must be responsible.

It's not much, but it's so wronged.

At the same time, Li Fan said.

"I have a way, I don't know if Director Li can let me try."

"I can fix this drill machine."

"I looked at him, but the control panel was broken."

"I have the ability to fix it."

At this time, when everyone was most anxious, Li Fan stood up.

It takes such a moment to let the leader see his strength.

When Deputy Director Li heard Li Fan's words, he couldn't believe it.

"Li Fan, you really have a way, you don't joke anymore!"

"There is no way for an eighth-level engineer, and there is no way for an eighth-level welder."

"You're an eighth-level fitter, can you really do it?"

Deputy Director Li didn't believe in Li Fan's repair of the drilling machine.

After all, even Level 8 engineers can't repair it.

Fitter is just an ordinary type of work, can it work?

Chen Jianguo said.

"Li Fan, I know you have the ability, but this thing is not something you can do."

"Don't be reckless, just be honest and get your parts."

"Let's just ask other Federation engineers to fix this thing."

Huang Jiancai also nodded and said.

"yes, this thing can't be repaired at all, don't be reckless."

"Listen to Engineer Chen, let's let the people from other federations repair it, and there is still a little bit of loss left."

The two of them didn't look at Li Fan at all.

After all, no fitter has ever been able to fix a machine that has broken down.

They had no confidence in Li Fan.

Li Fan knew that his words had unconvinced them.

But it can't be helped, the skill is so powerful.

Li Fan has this strength.

Since everyone didn't believe it, Li Fan could only be strong.

"In 10 minutes, I'll fix it, you just have to look at it."

"Definitely give you a brand new bezel."

Li Fan took the cutting machine and began to cut the broken baffle.

Cut off the fractures with uneven edges.

Under Li Fan's god-level fitter skills, the baffle was cut straight by Li Fan.

Then Li Fan made a small modification to this baffle.

Li Fan found that this operating board had a big flaw.

There are also some areas that can be optimized.

The operating panel was instantly unrecognizable and lost its original appearance.

Li Fan got everything in place and began to weld the operation board.

The surrounding fitters cheered for Li Fan after seeing Li Fan's shot.

"Master Li, you must work hard, you must repair this drilling machine."

"Master Li, your skills are amazing, I believe you will succeed."

"Master Li, you must succeed, if you fail, we will all feel distressed."

The men are cheering for Li Fan.

The women were silently cheering for Li Fan in the back.

Then Li Fan said to Huang Jiancai.

"Master Huang, lend me your welder's tools."

"I'll be able to get it right away."

Huang Jiancai has no choice but to take Li Fan.

handed his tools to Li Fan.

His own stuff that can't be soldered.

Li Fan can weld well as a fitter, which is impossible.

It's not that simple.

I'm waiting to see the jokes of Li Fan, a genius fitter.

How can young people progress without a little blow.

Li Fan took the manual welding torch and began to weld the two baffles at a fixed point.

At this point, he found himself once again in a state of flow.

Where to weld how much, where not to weld.

All this relevant information appeared in his mind.

Huang Jiancai watched quietly from the side, with a strange expression on his face.

The more I looked at him, the more surprised I became, Li Fan's methods had surpassed himself.

He exclaimed.

"How is this possible, isn't Li Fan just an eighth-level fitter?"

"Why is he so good at welding?"

"It gives me the feeling that I've entered the realm of a master."

"Made, I'm no match for a fitter?"

"Nima's, my efforts for so many years can't compare to a hairy boy."

Huang Jiancai's whole person was grinning at this time.

When he found that his efforts for so many years were not as good as Li Fan, who used a welding torch on the first day.

He almost died on the spot.

Director Wang heard his exclamation.

In this way, it is possible for Li Fan to repair the baffle of the drilling machine.

Hope burned in his heart.

Li Fan must succeed.

I don't want to be punished because of Yi Zhonghai.

Deputy Director Li was amazed when he heard Huang Jiancai.

Could it be that Li Fan is really okay?

However, Li Fan's technology has surpassed that of Huang Jiancai, an eighth-level welder.

What kind of monster is Li Fan?

Chen Jianguo heard Huang Jiancai's exclamation.

Although he didn't know much about the welder industry.

But Huang Jiancai is the most powerful eighth-level welder in the factory.

He's done that.

Then Li Fan's technique must be very powerful.

It is really possible for Li Fan to repair this drilling machine.

I didn't expect to be able to meet such a genius today.

It's really a blessing for three lives.

Meanwhile.

Yi Zhonghai came back from the infirmary to bandage.

Madea was deceived by Li Fan.

He even said that he was going to be crippled.

It's just an ordinary minor injury.

Mader Lifan, this brute.

Wait to kill him.

I saw everyone gathered around their machines.

He hurriedly asked Jia Dongxu to help him over.

After all, if your machine tool is broken, you will be responsible if you don't repair it well.