The electrician was busy on the side, and Li Anchor stayed by his side and watched for a while, and found that even staring at it couldn't help much, so he stepped aside and picked up his mobile phone.

I opened the note and found a kind of anchor with a good reputation, and then connected two desktop computers of about 10,000 offline, after all, the computers in the factory are not fully equipped.

After he finished placing the order, the electrician was still busy connecting the printer, and he was a little bored and just wanted to walk around the factory to see how he planned the layout of the machine.

At this moment, the electrician stood up from the side of the distribution box, put down all the tools in his hand, and walked to Li Anchor's side.

"Boss, I just took a look at the hardware of the distribution box, and calculated the rated power of your machine, and found that the empty opening, electric switch, and wiring in the distribution box are a little small.

I can just put it on now, but if I use it for a long time, the hardware will definitely go wrong.

So I'm going to go out and buy some suitable parts for the hardware and electrical materials nearby. ”

When Li Anchor heard this, he immediately came back to his senses and said to the electrician: "Oh, then I'll drive you there, Master Gong!" ”

"No need boss, that store is still quite close, and you may not be as fast as me riding an electric car, very fast!"

Li Anchor listened to the electrician's answer, and then looked at the expression on the electrician's face that was obviously unwilling to let him follow, he immediately came back to his senses, and then replied quietly.

"Oh, that's okay, then I'll trouble you, Master Gong!"

As soon as the electrician heard him say this, his face immediately showed joy, and then he hurried away from this side.

The reason why the electrician was reluctant to let Li Anchor follow, of course, was because he didn't want him, the master, to know the price of the materials that needed to be used.

Li Anchor didn't delve into this problem, as long as he could do a good job, he didn't care about the electrician's careful thinking.

Looking at the place where the shutdown was, the contents of the distribution box had been dismantled by the electrician, so now even if he wanted to turn off the power, he couldn't use the light-curing printer.

In the factory without electricity, it was still quite boring to say, so Li Anchor did not continue to stay in the factory, but returned to the car, set the car on fire and turned on the air conditioner.

Feeling the cold air blowing on his face made him feel very comfortable, but the noise generated by the operation of the car was a bit high, and the interior panels inside the car were full of dinosaur waves.

Listening to the noise from the interior panel and the exhaust pipe outside the car, Li Anchor decided by himself, as long as he finished the factory and handed over a large number of models, he would start to prepare the old guy himself.

Just when he was thinking nonsense, the electrician had already returned on an electric car, and there were still a lot of parts in the basket.

As soon as the parts were in place, the electrician also returned to the distribution box and got busy, Li Anchor inadvertently took a part, looked at the bull mark on it, and nodded secretly in his heart.

Although he can't see the quality of the parts, the logo of the bull is still recognized, anyway, if he doesn't know what the quality is, it's always right to choose a big name.

Just like that, an hour passed quickly, and the electrician stripped the skin and installed the nose, and soon connected the cable into the distribution box.

Looking at the very regular circuit in the distribution box, there was a pleasing feeling, and Li Anchor also knew that the circuit had been installed after seeing the electrician nodding.

"Boss, this electricity has been completed, you see ......"

"Oh, good, how much? You open the collection code, and I will transfer it to you! ”

Li Anchor happily settled the bill for the electrician, he didn't want to waste time on this money, now he just wanted to start the machine quickly and try the effect of the metal laser sintering 3D printer.

After sending the electrician Master Gong away, Li Anchor couldn't wait to close the door of the factory, and then hurriedly came to the laser sintering printer that had just been connected to the electricity.

With a slightly trembling hand, push the power on the side of the printer, and as the printer is powered on, the machine starts to run.

As soon as the printer is turned on, like those printers in the past, the self-test procedure is first started, and the high-energy laser emitter is driven by the stepper motor to constantly locate in the printing area.

The self-test model is actually very fast, faster than all the printers of this type on the market.

Looking at the printer that had completed the self-inspection, Li Anchor took out several one-liter plastic buckets from the pile of boxes on the side, and what was placed in several plastic buckets was nothing else, it was the consumables needed for laser sintering printers.

In these barrels, there are different powders, such as aluminum powder, titanium powder, nickel powder, iron powder, etc., and the thickness is not multi-group, almost all of them are more than 100 meshes.

Li Anchor casually took out a bucket and just wanted to pour all the powder in it into the powder feeding cylinder, but after opening it, the powder feeding cylinders in the printer confused him.

At the beginning of the assembly, Li Anchor didn't notice that the specified raw materials were marked on the powder feeding cylinder, but at this time, when he came to add consumables, he let him see it.

Since there is a mark on the powder tank, it is added according to the marking, and Li Anchor, who originally only wanted to pour iron powder into it, directly added aluminum, titanium, nickel and other metal powders to it according to the label.

After filling the printer with consumables, Li Anchor took out a USB flash drive from his pocket, and the USB flash drive was the printing file of the miniature engine that he made alone.

As soon as the file was inserted into the printer, sure enough, the process was exactly the same as the previous synthesis, and the intelligent formatting immediately began.

The intelligence of the printer is very high, and Li Anchor doesn't need to interfere too much at all, as long as the printer starts running, he just waits quietly on the sidelines.

When the printed file is intelligently formatted by the printer, the printer begins to run officially, and the laser-emitting emitter is constantly running everywhere in the printing area.

As for the area where the high-energy laser is being irradiated, the powder spreading roller is constantly mixing the various powders in the powder feed tank and then sending them together to the printing area.

Layers of mixed metal powder were laid on the printing platform, and the high-energy laser was constantly sintering the powder together layer by layer, and the dazzling light emitted made Li Anchor dare not look at it directly.

This kind of scene is the same as electric welding, if people are staring at electric welding, they will definitely hurt their eyes.

The high-energy laser is constantly irradiating on the powder layer, and the powder roller is also spreading the mixed powder layer by layer.

I saw a very small mini in-line four-cylinder cylinder head, which had begun to take shape in just a short period of time.