The printer is constantly running, and the numbers on the meter are also changing wildly, so it's no wonder that the printer's cable is as thick as a child's arm.

The printer was printing other parts of the miniature engine under the setting of Li Anchor, while he himself made a detailed measurement of the newly printed small cylinder head.

The measurement results are very good, all the accuracy tolerances are within the design range, and this kind of printing accuracy can also allow him to play some more high-end things.

After measuring the accuracy of the cylinder head, Li Anchor had nothing else to do, he wanted to plan the placement of each printer, but he was alone, even if the design was completed, he didn't have so much strength to place it.

Glancing at the laser sintering printer that was still running, Li Anchor didn't plan to continue staring here, after all, he couldn't plug in when the printer started running.

He might as well take advantage of this time to go out and buy some things that the factory lacks!

Thinking of this, Li Anchor filled the spare powder feeding cylinders of the printer with consumables, so he locked the door and left the factory, came outside to drive the car, and he drove towards the agricultural machinery mall.

The agricultural machinery mall in the county sells a particularly complete range of things, and it is not limited to agricultural machinery, even some construction machinery, which is also being sold here.

And Li Anchor came here this time to see if there was a suitable electric handling hydraulic truck in his factory, and it didn't need to be very large, as long as he could drag his printers and meet his daily use.

After going around in circles, Li Anchor also fell in love with one, which is electrically powered, can be used as a forklift, and has a maximum height of two meters above the ground, which is especially suitable for his current situation.

He didn't say anything, he directly spent more than 16,000 to buy one, with this thing, Li Anchor felt that in a short period of time, it seemed that there was no need to load a car in the factory.

After buying this thing, Li Anchor drove the old guy like a tank again, and drove towards the place where the monitoring equipment was sold.

The factory hasn't installed monitoring yet.,It's always unsafe not to pretend.,As for the things on his body that can't be known.,That's no hindrance.,When he synthesizes, it's just a power outage for all monitoring.。

You can't just discard the benefits of monitoring for these reasons, right?

Li Anchor bought a complete set of monitoring equipment in the place where he sold monitoring equipment, and included it with the installation.

After finishing the monitoring matter, Li Anchor went to Unicom again, and set up an enterprise broadband for the factory, and Li Anchor bought all the things such as switches in this circle.

Anyway, he came out this time and purchased a lot of missing things, as long as they were needed in the later stage, they were all purchased by him, but even so, it is estimated that after the plant is put into use, there will be other things that are missing.

But at this time, he bought everything he could think of, and the trunk and back seat of the car were still empty when they came, but they were already full at this time.

Li Anchor drove his broken car and kept shopping until noon, until his stomach screamed, and then he filled his stomach at the Lanzhou Hotel he often went to.

After eating, Li Anchor hurried back to the factory, according to his calculations, those parts should have been printed by now, plus the handling hydraulic truck he bought also said that it would be delivered in the afternoon, which made him have to go back quickly.

Li Anchor parked the car outside the factory, opened the door and first glanced at the printer, sure enough, all the parts had been completed, and then he was not busy taking out the parts.

Instead, he turned around and went back to the car, opened all the doors of the factory, drove the car in, and then unloaded what he had bought.

As soon as he unloaded the things from the car and put them aside, he heard his mobile phone ringing, Li Anchor picked up the phone and listened to it, it was the delivery person who had come, and Li Anchor hurriedly walked out of the factory.

Sure enough, a four-meter-two truck drove from the factory gate, Li Anchor waved his hand to guide the other party over, and then the electric hydraulic truck he bought was unloaded by the driver with a special sling from the car.

Li Anchor gave the balance to the people, watched them leave, and then couldn't wait to step on the pedal of the hydraulic car, and then operated the electric hydraulic car to turn around the factory.

After he became familiar with the operation of the hydraulic car, he slowly approached the laser sintering printer, which he bought just right, if there was no car, Li Anchor really had nothing to do with the parts that had just been printed.

It seems that the printing is quite easy, and the printed thing doesn't sound like much, but this is a metal printed by laser sintering, so without the use of tools, you really can't get out the parts with the flesh alone.

Lift the wishbone of the hydraulic car, and then tie up all the printing platforms in the printer with a lifting belt, and then Li Anchor pressed the lifting button again.

The wishbone hoisted the printing platform, and then Li Anchor carefully drove the trolley, withdrew the printing platform from the printer, and put it on the ground.

After doing all this, Li Anchor drove the car to the side, and he himself pounced directly on the freshly printed part, and then found the pliers and saw to disassemble it on the printing platform.

Because it is printed on the superposition of multiple parts, there are still printing supports, but because of the special metal materials, there are few supports.

One by one, the parts were removed from his printing platform, and the cylinder block, crankshaft, cylinder block, piston, cylinder gasket and other parts were all placed on the ground by him.

After Li Anchor was dismantled, he began to carry out a fine processing of each part.

By the time he had finished all the parts, more than an hour had passed, and although he was tired from the work, he himself felt unusually good.

The parts are ready, and Li Anchor is a little impatient to install this miniature in-line four-cylinder engine.

Even if there are some things that are not available in the factory now, the main thing is what can be installed.

The parts were loaded into the cylinder one by one by Li Anchor, and at the Jiangcheng high-speed rail station, four men were sitting in the waiting room waiting for the train.

These four people are the criminal police of the Hanyang District Bureau, and they are waiting for the high-speed train to depart from Dongshan Grilled Chicken City.

"Captain, what should we do about this matter!

To be honest, after the meeting in the morning, I moved out the criminal law, but I really didn't find a suitable clause!

As far as we know so far, there is really no way to identify it as a gun! ”

The middle-aged policeman who was asked, after listening to his team's questions, also had a headache, so he couldn't help but put his hand on his forehead.

"Well, why don't I know that?

Although in the video provided by Factory A, the thing can indeed be loaded with metal parts, but this does not confirm that the all-plastic is a gun!

As far as I can see on that video, I don't think it's necessarily as powerful as a toy gun with BB bullets! ”

When the few people next to him heard the captain say this, they all looked listless.

[The G2056 train from Yangcheng to Quancheng is about to arrive at the station, please ......]