In the Spring City stamping die workshop, there is a hot scene.

The first thing Liu Darui, the head of the technical department, does when he goes to work every day is to come to the workshop to confirm the processing progress.

Normally, it takes about three months to complete a pair of medium and large stamping dies.

Processes such as milling the forming surface and improving the accuracy of the grinding machine are time-consuming, and there are no shortcuts.

However, in order to improve the progress, Liu Darui directly arranged three shifts of people to work day and night, and properly realized "007" in disguise.

In this way, in half a month, the outline of the mold has come out.

"Mr. Dong, according to this progress, you can assemble and test stamping next week."

"At that time, the Jetta door hinge reinforced nut plate can start to be switched to our own factory's own production, and other nut plate molds will also be processed one after another to achieve our spring city speed."

Liu Darui can be described as high-spirited at this time.

In the past, TDM molds were used to make nut plates, which not only often cracked, but also had high costs, which made him very embarrassed.

Now that PRG's mold technology has been unexpectedly obtained, as long as it is digested and absorbed, it can not only solve the production problem of nut plates, but also expand horizontally to other stamping parts.

At that time, in the whole Spring City, which stamping parts factory is their opponent?

than the relationship, they are a subsidiary of the Spring City Automobile Group.

Compared to the cost, the processing fee of the PRG process is only a fraction of that of TDM.

When the time comes, all kinds of stamping orders from Chuncheng Volkswagen and Chuncheng Automobile Group can be eaten to what they don't want to eat.

"Stop the mold processing of auto parts, complete the mold of the nut plate first, and strive to replace the nut plate of Nanshan Auto Parts Factory next month."

After Dong Chun came back from Yangcheng, he had a deep grudge against Nanshan Auto Parts Factory.

If you don't teach them a lesson, you won't be able to calm the anger in your heart.

Of course, the most important thing is to use the PRG process to make nut plates, which is a good thing for Dong Chun to kill two birds with one stone.

It not only avenged the revenge of Nanshan Auto Parts Factory, but also made political achievements.

He has already made a report to Chuncheng Automobile Group, and is ready to make a report on the new technological achievements of Chuncheng Stamping Plant next month, so that the brother enterprises and group leaders in the group can see the extraordinary work of Chuncheng Stamping.

Maybe I can be transferred back to the group and rise step by step.

"If we stop all the other molds, it may affect the prototype processing schedule of other vehicle parts?"

Liu Darui reminded him a little cautiously.

"How long can it affect? The trial delivery schedule for those models was already in full swing, and it was not missing ten or eight days. ”

"You remember, the production of all the nut plate molds used in all models of Chuncheng Volkswagen and Modu Volkswagen is the most important work in the factory in the near future, and there is no one!"

As soon as Dong Chun said this, Liu Darui naturally did not dare to object.

However, he secretly complained in his heart.

In the information I received, there was only part of the design data of the nut plate and the mold structure drawing.

This means that there are parts of the content that they need to digest and absorb before designing.

Originally, he wanted to produce one set of molds first, and then slowly produce the others.

Now Dong Chun wants him to free up all the production capacity of the mold workshop to the nut plate mold in one go.

The pressure on him was great.

"Mr. Dong, the technical department must go all out and resolutely complete the task."

There is no good end to working against the leader.

Liu Darui was able to mix into the position of the head of the technology department, and naturally he did not rely solely on superb technology.

Soon, the people of the Spring City Stamping Technology Department started working overtime every day.

Six sets of PRG molds started at the same time, and more than one million were put into it in one go.

And that's not even counting your own in-house processing costs.

As a result of this effort, the first set of door hinge reinforcing nut plates for Jetta models was finally assembled.

Originally, Liu Darui wanted to debug it in a low-key manner first to see what else needed to be improved.

After all, for stamping dies, continuous commissioning after assembly is an important task in itself.

However, in order to show his attention, Dong Chun had to arrange a ceremony to celebrate the completion of the assembly of the first set of PRG molds designed and produced by Chuncheng Stamping and the start of the test machine.

As the only stamping plant under Chuncheng Automobile Group, Chuncheng Stamping Factory has more than 1,000 employees.

Although not everyone attended the ceremony, it was a very grand event.

Dong Chun even invited local leaders and reporters from Chuncheng TV and some newspapers to attend the meeting.

At this ceremony, Dong Chun personally took the stage and made an enthusiastic speech for an hour.

In the case of thanking the local leaders and the group for their support, as well as affirming the efforts of employees, Dong Chun constantly emphasized how to grasp the development direction of the industry, set up a research team of PRG mold, and personally led everyone to catch up with the progress day and night.

In short, Chuncheng Stamping was able to produce PRG molds, which were the result of his efforts.

As for the Chuncheng stamping, which had not produced PRG molds at all more than a month ago, and had not even studied PRG molds, how did it make a technological breakthrough so quickly, this problem was deliberately downplayed by Dong Chun.

Anyway, except for those in the company's technical department, everyone else didn't know the specifics at all.

Is it wrong to say that you have set up a research team for PRG molds?

Nope!

During this time, there is indeed such a group in the technical department.

Is it wrong to say that you grasp the direction of industry development?

Nope!

The PRG process is definitely one of the future development directions of the stamping industry.

In the production of small and medium-sized parts, PRG molds have unmatched cost and efficiency advantages.

At present, almost all domestic stamping factories are still using the TDM process, and they have begun to break through the PRG process with the Chuncheng stamping plant, isn't this far-sighted?

Liu Darui listened to Dong Chun on the stage praising the PRG mold next to him, and he was a little worried.

The mold is definitely usable, and he is confident of that.

But is it possible to produce qualified parts......

There was no mold trial, no verification of small batch production, he was not sure!

It's a pity that it's useless to say anything now.

Soon, Dong Chun, with several other leaders, symbolically pressed the start button of the stamping machine.

The PRG mold produced by Chuncheng Stamping Factory skips the mold trial and directly enters the small batch trial stage.

Syllable!

Syllable!

Syllable!

A crisp sound was like beautiful music, which made the smile on Dong Chun's face a little more.

Taking advantage of this opportunity, he gushed to the leaders of Chuncheng Automobile Group.

However, when the first part was produced, Dong Chun picked it up, but his face changed.