Chapter 614 Four-Axis CNC Machine Tool (First Shift)

"The little brother in the south shouldn't dare to have any other ideas?"

"So the flying motorcycle, isn't it for the fat bear?"

"At that time, the fat bear will not only be frightened by individual anti-aircraft missiles in this barren land, but may also be blown up by flying motorcycles."

Liu Hai thought about things, but the most important thing is the development of semiconductors, whether it is the development of digitalization or informatization, it is inseparable from semiconductors.

And by 2020, all walks of life are inseparable from the support of semiconductors.

"In the future, most of them will have to fight the bald eagle on this!" Liu Hai knows that the competition in semiconductors will inevitably have to compete with Bald Eagle in the end, which is no way to do it.

However, our domestic semiconductors, because our country is now much better than in history, so the development in the field of semiconductors is not much behind foreign countries.

In particular, the mature applications that Liu Hai took out one after another, from industrially manufactured CNC machine tools to counter-battery radars for military equipment.

All highlight the importance of semiconductors, the core of CNC machine tools is the chip, and the chip itself belongs to the semiconductor.

Not to mention the phased array radar antenna of the counter-battery radar, the entire system is also composed of chips.

If any industry wants to develop, then it is necessary to let the higher departments see the development potential of this industry.

will continue to promote the development of this industry, instead of saying that with a PPT, no matter how beautiful you say, your superiors will have doubts.

Of course, this is also the advantage of bangs, and only bangs can be qualified to make so many things, so that the superior departments can see the results, and I am afraid that it will not work if they are replaced by others.

After all, it is one thing for someone else to want to build a CNC machine tool, or to design a counter-battery radar, and it is not easy to go in terms of process.

After all, the investment in these two pieces of equipment is not small.

As for the country's development issues, Liu Hai didn't worry about it, because he was alone, and no one else thought it through.

If the policy comes out by then and you find some problems, then you can raise them to your superiors, and there is no need to rush to express your opinions now.

Before getting off work, Liu Hai came to the museum for a walk, and the museum is still the deputy director, and the specific management is managed by a director.

However, these things inside cannot be moved or taken away by anyone without the consent of bangs.

As for the security, it is the security office inside the factory, and there are dozens of people in the museum.

Liu Hai knows that there are still a large number of antiques among the people, and some of them are better than those stored here.

Liu Hai came here mainly to sign, because some cultural relics need to be processed before they can be exhibited, and there are too many cultural relics, and it is not possible to deal with them in a while.

Liu Hai looked at it carefully, then nodded and signed, which also adopted the mode of responsibility card.

It is signed not only by the staff, but also by the security personnel.

In order to move these things, it is necessary for the staff, themselves, and the security department to be present before they can be moved or opened.

In fact, most of the people who come to the museum now still like to see the industrial products downstairs.

That is, the first motorcycle in the motorcycle factory, the first marine hang-up thruster, the first excavator in the motorcycle factory, the first loader, the first car and so on.

The school also takes students to organize regular visits and go back to write essays.

It is conceivable that these schools will be indispensable for aircraft carriers in the future, and students will have to write essays again.

Coming out of the museum, Bangs found it snowing outside.

"It's going to be the New Year again!" Bangs just muttered, and then went home.

When I got home, I went to the basement, and then to the aircraft carrier space.

Liu Hai now has two main tasks in the aircraft carrier space, the first is to design the C130 lengthened version, on the one hand, to reduce some systems, and on the other hand, to redesign the parameters of the airframe according to the existing material technology, including wings and landing gear.

On the other hand, it is necessary to design a school building according to the structural diagram of the aircraft carrier.

After a year or two, I will build a 1:1 teaching building with the Ford aircraft carrier at the motorcycle factory university.

There are also a lot of problems involved, after all, there is a big gap between reinforced concrete and the pure metal structure of the aircraft carrier.

Of course, the appearance does not have to be an aircraft carrier, after all, it is too eye-catching, and the appearance can look like a normal school building.

Speaking of which, the speed of the bangs is fast enough, because it is a reduction, so the space for other devices in the future has been reserved.

Every time other aircraft designers and manufacturers optimize and add certain systems, they have to re-engineer their internal systems.

Of course, it is precisely because of this that bangs can complete such a huge workload alone.

When Liu Hai was designed inside the aircraft carrier, Bald Eagle re-evaluated a large country in the East.

The main thing is that a certain large country in the East has equipped a new turboprop aircraft, and has converted it into an anti-submarine aircraft with this aircraft.

Some of Bald Eagle's tentative plans had to be postponed, knowing that in the past, when a large country in the East did not have aircraft, Bald Eagle's diving equipment could easily approach other people's ports.

Since the beginning of equipping some countries in the East with propeller aircraft, it has been difficult for the diving equipment of the Bald Eagle to approach the ports of the opposing side.

In the past, you could go to other people's inland seas to show off your might, but since you are equipped with propeller planes, you don't want to go to that place.

And now with a turboprop carrier, the opponent will react faster.

So some departments of Bald Eagle have to adjust a lot of plans.

There is also an important piece of information, that is, Bald Eagle's aircraft carrier fleet actually mistook other people's planes for their own.

Because the two are almost identical, let someone else's transport plane swagger directly over the head of his own aircraft carrier.

This annoyed some of the Bald Eagle's departments, and some of the Bald Eagle's departments investigated the aircraft incident, but nothing came of it.

Bald Eagle still does not believe that some countries in the East can rely on their own development and production of turboprop transport aircraft, or carrier-based turboprop transport aircraft.

Although some departments of Bald Eagle do not believe in this result, there is no possibility of leaking the secret after an ongoing internal investigation.

Of course, in order to prevent such a thing from happening again, some departments of Bald Eagle have devised very complex secrecy procedures, especially in terms of critical equipment.

In addition, some departments of Bald Eagle are also full of vigilance about the rise of Niuniu.

Some departments of the Bald Eagle try to influence the decisions of the Cow Cow by influencing the Cow Cow's council.

But Bald Eagle is facing the old nobles of Niu Niu, and these guys also know how to play the council.

So Bald Eagle has been at a disadvantage in this regard, and the recent three masters have made Bald Eagle very annoyed.

The bald eagle does not want to see Asia, there is no country that is too powerful.

Therefore, Bald Eagle once supported the three masters, mainly to balance certain countries in the East.

But I didn't expect to come to this point, and the three masters actually fell completely to the fat bear.

Therefore, this time, the bald eagle will unite Niu Niu and Gallic chicken to teach the three masters a lesson, and let the rest of the world see, what kind of fate will it be to follow the fat bear?

If it had been replaced, Bald Eagle would definitely not dare to send ground troops, after all, Bald Eagle's army units no longer have any confidence.

After all, the first two times failed, and it was a big shame.

Fortunately, a large country in the East is already about to join the economic system dominated by itself, and this is easy to do.

Of course, there are no formal negotiations yet, but the two sides are already gearing up.

However, the bald eagle was a little worried, because it was impossible for Niu Niu to give up such a big benefit, and the Gallic chicken was still eyeing the side.

In other words, Bald Eagle has to face two rivals, and Bald Eagle tries to form an alliance with the other two countries, but the other two countries do not respond in any good faith.

However, at this time, Bald Eagle received a message that Fat Bear was likely to join forces with the Three Masters to help Fat Bear establish a port in the Indian Ocean and open up a land passage from the Caspian Sea to the Indian Ocean.

This news made Bald Eagle very shocked, in fact, Bald Eagle also has a relevant plan, that is, to simulate what the other party will do next, especially in terms of big strategy.

Fat Bear is good at everything now, but it is just a port that is not frozen.

Therefore, the bald eagle did not care about tossing some countries in the East for a while, and sent all the intelligence forces to the place where this might happen.

And urgently provided military assistance to the neighbors to the west of the three masters, and even openly stated that they were willing to provide some more advanced fighter jets to the neighbors to the west if the situation required it.

And invite the neighbors to the west of the three masters to send pilots to experience the Bald Eagle's most advanced Tomcat fighter.

Not to be outdone, the fat bear said that he would give more support to the three masters.

In the eyes of the bald eagle, the fat bear wants to open up the land passage to the Indian Ocean with the three masters, and once this land passage is successful, then the three masters can join the fat bear.

As for saying that some countries in the East are now completely out of control, anyway, some countries in the East have fallen out with Fat Bear, which is good for themselves.

Liu Hai was also surprised by these news, and couldn't understand how it had developed to this extent.

But I don't think about it, Liu Hai is in the CNC machine tool workshop, and the four-axis CNC machine tool is being accepted.

Four-axis CNC machines look bigger than three-axis CNC machines, which is something that can't be helped.

Because all kinds of systems are a bit silly, whether it's a servo system, or a control system, or a tool system.

Of course, such a step-by-step development will be more beneficial to future development.

The current operating procedure is tape, and when Liu Hai designed the three-axis CNC machine tool, he still used perforated paper tape at the beginning.

Bangs watched the watch carefully, and five seconds after the tape was read, the CNC machine began to move.

The spindle positioning has already been done in advance, so the program is read and the machining starts directly.

Bangs mainly look at the spindle motor and the work of each system, and the bangs don't really care about whether the processed parts are successful.

Because the machined parts are not successful, it is likely to be a problem with the program or the debugging of the equipment.

The bangs mainly look at the operation of the equipment, whether it is in line with the operation mode of the four-axis CNC machine tool.

Gou Rong is also nervously watching the test, from the development of the four-axis CNC machine tool to the first sample has been a year and a half.

Gou Rong was actually a little anxious in his heart, after all, when he followed the bangs before, how fast the bangs were, he personally experienced it.

Fortunately, the first prototype was finally manufactured, and the design of this prototype was also affirmed by Liu Hai.

But before the test was over, all hearts were in their throats.

Because there is a possibility of failure at any time.

When the program of the CNC machine tool is completed, the operator takes out the processed parts in accordance with the operation specifications.

Liu Hai took a closer look at the scene after processing, as some masters, you don't need to look at the processed parts, as long as you look at the processed chips, you know what will happen to the parts in the end.

"Liu Gong." After Gou Rong's test was completed, his hands trembled a little, after all, it was the result of a year and a half of hard work led by himself, especially when he was doing manual programming, during that period of time, Gou Rong was on fire every day, because the first manual programming was over, and when he was given to Liu Hai for approval, Liu Hai said that something was wrong.

Then the whole team recalculated, and then reprogrammed, and found that it was really different from the last time, and to be on the safe side, Gou Rong did a second recalculation and found that it was different from the previous two results.

So programming this by hand almost drove Gou Rong crazy.

"Look at you." Liu Hai patted Gou Rong's shoulder, and Liu Hai could understand the other party's mood now.

(End of chapter)