That night, Chang Haonan and his entourage stayed in a guest house arranged by the Science and Industry Office.

There is no need to open an extra room.

Because Hong Kun and Zhu Yadan both said that they could live in one room, because they would take turns to rest at night during the mission.

Chang Haonan's room was in the innermost, so anyone who wanted to go through it would have to pass through the doors of the other two rooms.

He felt that this seemed a bit too sensitive, and that a bad rest might affect the task during the day tomorrow.

However, Hong Kun said that they have been trained to get used to this way of resting, and the security work is not careful, only more careful.

Considering that the person in charge of the security work arranged by Ding Gaoheng is Hong Kun, Chang Haonan is not prepared to say anything more about this kind of matter.

Everyone is also for his good.

Fortunately, one night passed, and nothing happened.

The next day, Chang Haonan officially went to Jiangcheng Heavy Machine Tool Factory with a group of eight people according to the original plan.

The leader of the team was naturally Jiang Chong's deputy factory director, named Lin Xu.

In this year, the management model of state-owned enterprises has been changed to the responsibility system of factory directors, but Jiang Chong's factory director resigned two years ago because of performance problems, and the new factory director has not been officially documented, so he can be regarded as Jiang Chong's leader.

"Hello, Director Lin."

"Hello Mr. Chang, we only received a notice at noon yesterday that a technical expert from Beijing wanted to visit our factory, and the time was in a hurry, and it was really not well received."

Lin Xu walked up and shook his hand, and then said with an embarrassed face,

"So the banners and slogans, one is too late to prepare, and the other is that you may not know that the current income and expenditure of our factory is not optimistic, and it is true that we can't get too much spare funds."

These words almost burned Qin Xueming's CPU, who was just a driver.

He has been in the system for 20 years and has never seen this kind of play.

In the past, when there were enterprises under the Science and Industry Office, he also went to inspect them.

Those who are the secretary of the factory director, no matter how bad the state of the enterprise is, are eager to dig out their family funds and do a good job of face engineering.

As a result, the director of Lin Xu, facing the researchers designated by his superiors, said in the first sentence, "Our factory's current income and expenditure situation is not optimistic"?

Is there really such a sincere person?

Do you want to get mixed up in the system?

However, Chang Haonan's reaction was very ordinary:

"It doesn't matter, I didn't have any instructions, but there is a project at the mouth of the aviation industry, which requires a super-heavy CNC vertical milling lathe of more than 15 meters, I heard that only your factory has a model in production in China, so I came to take a look."

In fact, on the plane to Jiangcheng yesterday, he also thought about whether he would encounter such a local factory director who looked down on the technical personnel sent by his superiors and tried to fool things with shoddy quality, but was exposed by himself on the spot and forced to pretend to be small, and finally led the entire factory to turn losses into profits and take off all the way under his guidance.

But after thinking about it again, I don't think it's likely.

When he won the May Fourth Medal before, some of his deeds were made public.

Although it is not as scary as the actual situation, it at least shows that he must be from a science and engineering background.

Second, after all, the name of the chief engineer of a project hangs, no matter how young he is, he can bluff people.

Of course, such a factory has been losing money for a long time, and the other party must be fooling somewhere.

But it won't be that blunt.

After meeting Lin Xu today, I found that my guess was really good.

The candor shown by the other party was astounding.

"Anyway, since you are here, I always want to take you to visit our Jiangzhong, although there are some difficulties at the moment, but we are also trying our best to overcome them."

Lin Xu said and brought Chang Haonan and his party to the door of a building closest to the entrance of the factory:

"Let's start with the history museum of our factory."

……

Chang Haonan didn't say anything to interrupt the route arranged by Lin Xu, he wanted to see what the other party was going to play.

But the latter had no intention of delaying time, and after fluently introducing the history of Jiang Chong, he directly brought Chang Haonan and them into the production area.

Although the name of Jiangzhong is called "Jiangcheng Heavy Machine Tool Factory", in fact, the business scope has long been not limited to making machine tools, so the related equipment is extremely complicated, if it is not for him to stay in the 112 factory and 410 factory for a long time, and even specially studied with the technical minister of the 410 factory, Zhong Shihong, for a period of time, I am afraid that it is really walked in, and it is also a dazzling outstanding.

"I think I always have a research background, have you ever been to a factory in a traditional industry like ours before?"

When he was in the changing area, Lin Xu asked as if he had unintentionally.

"I've never been here on such a big scale."

Chang Haonan gave an ominous answer.

"This is the final assembly hall for machine tools."

After putting on their overalls and hard hats, everyone came to the first workshop.

To Chang Haonan's surprise, there was no chaotic or even dilapidated scene as he imagined.

Although from a reborn's point of view, the layout of the workshop had problems such as a lack of clear classification of raw materials and semi-finished products, serious crossings of logistics lines, long material handling distances and duplication of routes, but for a factory in the mid-90s, this is not a blameworthy matter.

The only problem is that the number of workers working here is a bit small, resulting in the whole workshop being deserted.

"You want to buy the super heavy CNC vertical milling lathe, our factory corresponding model is CKX53160-1,16 meters level, in the past has been for the Gui Province and Hunan Province power departments to manufacture two, we have a customer in hand to abandon the order of semi-finished products, now order, as soon as the first half of next year can be delivered."

"Director Lin, the performance of your flagship product should be quite good, with such a high level of technology, why did I listen to what you just meant, the efficiency of the factory is still not up?"

"Whew...... What is the high level of technology, I have always had a word for myself, and I don't hide the situation from the organization. ”

Speaking of this, Lin Xu sighed helplessly:

"Like these fist products, we have gathered some experienced masters, engaged in production contracting, the responsibility is implemented to the people, and the mode of handicraft workshop is rubbed out little by little, otherwise there are semi-finished products, why do you need more than half a year to build?"

"But this kind of whole method is to engage in production battles, the output is less, it is okay, there is no way to use it in mass production, plus now the master retreats and leaves, and there are usually people who go outside to pick up some private work, and the new young people are impetuous and unwilling to learn the craft, and even the efficiency of this fine workshop is getting lower and lower."

"Mr. Chang you are also from science and engineering, know that modern industry is a standardized production, like us so intensive, the cost of each equipment is much higher than the import, the quality is almost the same as others, you buy this kind of machine tool import difficulty, so there are sales, some other can be bought from abroad, no one comes to us at all, now this workshop, is already the highest use rate of our factory."

"Have you ever thought about improving the management level through some means? It's a pity to let such a large factory go to waste. ”

Chang Haonan incarnated and replied appropriately.

"Of course, I thought about it, in fact, this is also my main job in the past few years as a factory director."

Lin Xu said and took Chang Haonan and a few people outside the workshop, there was a small room here, which was covered with various propaganda posters.

"We refer to the ISO9001 quality system introduced from abroad, strengthen the optimization of the quality management mode of the enterprise, and even specially invite experts from Japan to implement a comprehensive quality management system in the whole factory, so that every employee, not just the quality inspection department, participates in the quality management work."

"In addition, the 6sigma theory, which is currently the most popular in international large enterprises, is also introduced, and the data is used to make objective evaluations in customer, process management and improvement, and the standard deviation in mathematical statistics is used to realize the data as the basis for ......"

He spoke for forty minutes in a row.

can hear that Lin Xu is definitely not rote memorization, he has his own understanding of management.

In many places, he directly takes the example or even data of our own factory or some internationally renowned enterprises.

You know, this is not the era of the information explosion more than 20 years later, some middle-level managers do not have some real material in their minds, as long as there is a search engine, they can be the PPT god of war.

These things that Lin Xu talked about are quite valuable in this era.

"So, Director Lin, since you have introduced such a perfect management system, what do you think will be the main reason for our factory's loss?"

This sudden question made Lin Xu show some frustration:

"It's nothing more than those old problems of state-owned enterprises."

"No matter how good the management method is, in the final analysis, it depends on people to do it, state-owned enterprises, the relationship is complicated, people are floating in things, young people want to make a living with iron rice bowls, the old oilman fishes in the factory for three days and two days to dry the nets, and he is more active than anyone else in receiving private work outside, the number of administrative managers is more, but the efficiency is not high, and some stores along the street are cleaned up for rent, but there is no way to rent high prices because of customer flow and policy problems......"

Chang Haonan put on a look of agreement on the surface, but he already figured out half of it in his heart-

Today, even if I moved Siemens, I couldn't get out of these things on the wall.

A few years ago, when the management system of state-owned enterprises was chaotic, it would be constrained because of various constraints and tilting, and now under the responsibility system of the factory director, the factory director himself seems to know more about management and technology than anyone else, and finally there is such a result?

At the same time, Chang Haonan also understands why, despite consecutive losses, this deputy director of Lin has always been able to sit in a stable position.

Because as far as the latter's performance just now is concerned, anyone else will feel that the loss of the factory is a non-war crime.

It may be worse to change the factory director who does not know how to do it.

In fact, judging from the data, after the former factory director left, although he did not make the factory better, at least he barely stopped the decline.

As for the reason Lin Xu just mentioned......

Those words can convince many people.

Because this is the direction of public opinion in the late 90s.

State-owned enterprises are the original sin.

No one will dispute this.

But that didn't convince him.

Because the problems mentioned by Lin Xu are actually common problems of large-scale enterprises.

In her previous life, Chang Jiayao did not embark on the road of Zhaofei, and after graduation, she changed to work in several well-known factories.

Chang Haonan can safely say that the above situation is not lacking.

So, of course, those are problems, but certainly not fundamental.

Deputy Director Lin is indeed level.

In the face of a person who is very likely to understand technology to inspect, he will play tricks on enterprise management problems, and engage in this set of avoiding the important and making it light.

If someone else comes over and is so blinded by him, he is absolutely convinced.

And then another question is why Jiang Chong's balance sheet is the way it used to be.

The debt of 500 million yuan must not be fake, but even if you don't count real estate, just after looking at the equipment in these workshops, Chang Haonan can't estimate that it is only tens of millions of yuan.

Thinking of this, he pretended to be unintentional and asked:

"I heard that our factory seems to be going to be transferred to the Ordnance Industry Corporation?"

Lin Xu was stunned for a moment, and then shook his head:

"At the end of last year, there was such a saying, but then after our factory submitted the balance sheet, there was no follow-up, and it is estimated that we were scared by our liabilities of more than 500 million......

"500 million in debt?"

Chang Haonan pretended to be surprised:

"I don't know much about machinery from an aviation background, but if you count these factories and equipment, I'm afraid you can offset a considerable part of it, is it so difficult to get rid of it?"

"You don't know."

Lin Xu took Chang Haonan to a row of equipment covered with rain cloths:

"A lot of equipment in the factory, are imported from East Germany, Romania, Czechoslovakia, 91 years after a lot of manufacturers are gone, maintenance is not in place, plus just said, state-owned enterprises, employees do not know how to take care of equipment, before I just came to take office, the workshop did not see, I spent several months of hard work to rectify, to stop a lot of operations that are simply destroying the equipment."

"And these scrapped devices just keep them there?"

Chang Haonan lifted the corner of the rain cloth, it is indeed a machine tool, judging from the nameplate, it is the SC2000 vertical lathe produced in Romania.

"No way, it's easy to report the loss of equipment, but to scrap it, the procedures are very troublesome, and even if these things are not valuable, they can be worth more than 100,000 yuan when calculating assets and liabilities, which is better than nothing."

Taking advantage of Lin Xu's answer, he looked at several other pieces of equipment.

AKODA W250G CNC floor boring and milling machine produced in Czechoslovakia.

ZSTZ-10H gear grinding machine in East Germany.

SI50 internal cylindrical grinding machine in East Germany.

……

Indeed, as Lin Xu said, they are all old equipment that is quite old.

Even if the service life of such things as machine tools is relatively long, these models in front of them are indeed not very expensive to sell, let alone broken.

Until he saw a very familiar device-

Chang Haonan designed the soft abrasive polishing machine by himself.

"This one is broken too?"

He asked, pointing to the device.

"Yes, I only purchased it at the end of last year, but last month, there was a problem of excessive grinding and insufficient abrasive pass rate, and the manufacturer has overhauled it many times, but it has not been completely repaired, so I put the responsibility on our technicians, and we are currently arguing with them."

Hearing this answer, Chang Haonan didn't know what expression he should put on for a while.

He made his own equipment and counted it.

This problem occurs after a few months, and the only possibility is to force calibration with an abrasive that does not correspond to the corresponding label during the initialization of the PLC program.

It's also easy to repair, just change a set of nozzles, and at most a set of valves.

There is absolutely no way that it will not be repaired.

Chang Haonan raised his head and looked around at the dozens of machine tools and equipment around him.

This is the case in a workshop, and in the entire factory, there must be at least two or three hundred units of equipment that is classified as damaged or scrapped.

He suddenly realized.

(End of chapter)