After driving out for a while, Chang Haonan motioned to Qin Xueming to stop on the side of the road.

"Hong Kun, you get off the car now, go to Jiang Chong's family area to squat for a while, and see how this deputy director of Lin is going to mobilize workers to work."

In 1997, the national penetration rate of wired telephones was less than 10 per 100 people, and this is still counting the number of institutional and commercial use.

In Jiangzhong's factory in this case, there must be only a very small number of workers and families who can install telephones, so if you really want to notify something, you can only use the most traditional method.

Either the whole loudspeaker shouts, or the door knocks from house to house.

"However, if Xiao Zhu is alone, ......"

Hong Kun was obviously a little worried about his job as a guard.

"It doesn't matter, you don't have to wait there for too long, the workers rest early, if Lin Xu really goes to the family area to mobilize, it won't be too late, you just come back before midnight, this is the road fare, you can take a taxi."

Chang Haonan took out two pieces of money and handed them to the other party.

Normally, hailing a taxi in the middle of the night is a challenge for both drivers and passengers.

However, Hong Kun's safety is obviously not to be worried.

Before boarding the plane at Nanyuan Airport, Chang Haonan noticed that the two of them had gone through quite complicated procedures, and they also handed over something to the crew members for safekeeping.

Although he didn't ask in detail, he was obviously armed with him.

"Guaranteed to complete the mission!"

……

Early the next morning, Chang Haonan arrived at the Jiangzhong factory about half an hour earlier than the agreed time last night.

It's certain that Lin Xu will find a way to get in the way, but that doesn't mean that today's production demonstration is meaningless.

The trip to the investigation this time was very urgent, and even the request to visit the production process was temporarily put forward by Chang Haonan yesterday afternoon.

In such a short period of time, it is not easy for Lin Xu to gather a group of people, it is impossible to have time to arrange any too detailed means, and the habits that people have formed for a long time are not so easy to break.

So you can still see a lot of things.

"Mr. Chang, it's so early."

When the two cars of Chang Haonan and his entourage stopped at the entrance of the production area, Lin Xu, who was neatly dressed in his overalls, was already waiting here.

Obviously, he arrived earlier.

"Where is it, Director Lin, isn't this earlier?"

Chang Haonan enthusiastically began to greet each other.

"Eh, I always don't know, many of our Jiangzhong processes, especially the hot processing process, the production cannot be completely stopped, otherwise it will take a long time to restart, so we will always produce some products with high versatility at low speed."

Lin Xu "popularized" production-related common sense to Chang Haonan, and at the same time signaled the latter to follow him:

"But since you want heavy machine tools and equipment, today's production demonstration must not fool you with big road goods, you have to switch to some products with a certain degree of difficulty, this process almost takes half a day, and you can't let you dry up here, so I mobilized a group of old workers to work in advance, and now this kung fu should be about to start production."

"Is that so? I really didn't know that. ”

Chang Haonan, who had already made up his mind to watch the other party's performance, showed a suddenly realized expression,

"Alas, then you should have told me when I made my request yesterday, if the objective conditions are limited, even if it is postponed for another day, it is completely fine."

Lin Xu, who was walking next to him, thought in his heart that he should not postpone it for another day, he had a lot of dreams at night, but on the surface, he still looked diligent and hardworking, shook his head, and said helplessly:

"Alas...... Yesterday I went to the family area to inform that there were leaders who came to the door with the business of prepayment, and many people rushed to work with a roar......"

Looking at Lin Xu's acting skills that can completely win the Oscar, Chang Haonan secretly sighed in his heart.

If he hadn't sent someone to Jiang Chong's family area to squat for a few hours last night, he would have believed it.

Hong Kun returned to the guest house at about 11:30 p.m. and reported to Chang Haonan that he had waited until most of the people had turned off the lights, and he had not seen anyone notify him of anything on a large scale.

I saw a few people who followed Lin Xu during the day to look for people in certain buildings, but most of them only stayed for a few minutes and left, and only two people stayed for a long time.

In a factory with three shifts, a production team must have 100 people, even if it is one-on-one accurate door-to-door, it is impossible to be so fast.

"It's good if someone rushes to come."

Chang Haonan nodded:

"This shows that the workers still have the enthusiasm for production, but the efficiency was too poor in the past, and they couldn't see the money, so they naturally grinded foreign workers all day long."

Lin Xu's face changed slightly when he heard this, and after calming down, he hurriedly added:

"If all orders are the same as yours, you can make a 60% advance payment, and you can also let people see the cash, but unfortunately most customers, let alone advance payment, can't wait for the payment to be in arrears for several months, before procrastinating, sometimes have to ...... installments"

As they spoke, the group had already walked into a workshop that was located in a corner and had not been visited yesterday.

"This is the starting point of our production process, the casting partition, and it is also one of the places that needs the most attention from the masters."

"The casting area is divided into production support room, production management room, melting workshop, molding workshop, sand core workshop, cleaning workshop ......"

In terms of character, Lin Xu's ability is indeed good, and after 20 years, he is definitely a top product manager.

Not to mention production-related knowledge, you can also steal the day and avoid the important in some places that are not easy to be noticed.

People who understand technology and management, it is not too easy to get a quasi-insider who knows some relevant knowledge.

Chang Haonan is almost certain that after this set of processes is completed today, the pass rate of the final produced things will be quite ugly.

When everyone entered the workshop, the molten iron produced by the cupola furnace had been stored in the power frequency furnace.

"Can this molten iron be sent directly to cast?"

It's another half-understood question that half a bottle of water can raise.

"No, you have to add some alloys to adjust the composition of the molten iron."

Lin Xu shook his head and replied.

Chang Haonan's performance just now was exactly in line with his expectations.

I knew some of the basics before I came, but I didn't know about the more detailed production process.

"There is nothing to say about the high-frequency furnace, even if it is a newcomer who has just entered the factory, as long as he follows the operation manual, he can understand it, let's go and see the back part."

As soon as the words fell, a person rushed over from the workshop next door.

"There is a fault on the side of the core shooter, and the maintenance team has been eliminated, and the power frequency furnace must pay attention to maintaining the power, and the temperature must not be lowered!"

Lin Xu's face sank slightly.

"I always rest assured that the failure of the core shooter is generally a minor accident, and the loss of man-hours is at most 30-40 minutes, and the maintenance team arranged today is the most experienced, and it should be eliminated faster."

Chang Haonan, who was a visitor, didn't show any emotion, but just motioned for Lin Xu to lead the way.

"Let's go, let's see."

Inside the sand core workshop, a group of significantly older workers are surrounding a piece of equipment.

"What's going on? How did it fail at the most critical time? ”

"The little doll on duty a few days ago didn't know how long it hadn't been overhauling the equipment, a bearing was stuck, but fortunately, the problem was found in time just now and the equipment was stopped, and no more serious consequences occurred, as long as it was cleaned up and re-oiled."

One of them turned back and reported.

As Lin Xu said just now, it was not a major accident, and after 25 minutes, production restarted.

"It seems that the craftsmanship of the masters is still trustworthy."

Chang Haonan looked back at the sandblasting machine and said to Lin Xu, who was about to leave with him.

"These are the backbone who have worked in the factory for more than ten or twenty years, have the most feelings for the factory, and are also in the prime of life, but ...... Alas...... It's not a way to go on like this, and I can't stand in the workshop every day and watch them, and with so many processes, I won't be separated by myself. ”

The words were full of helplessness.

"It seems that Director Lin was right yesterday, management methods alone will not work, and in the end, the problem is still in the people."

After Chang Haonan finished saying this sentence, which seemed to be agreeing with the other party's words, he added the second half of the sentence in his heart:

"It's just that the problem is the factory director."

In the 25-minute troubleshooting just now, although the operation seemed smooth, Chang Haonan still saw a lot of unreasonable operations.

For example, the coverage of pre-repair work is not in place.

The problem of inadequate bearing cleaning should be able to be discovered in advance before the start of construction.

Another example is the simple oiling at the end, where the maintenance worker simply fills the oil pot with new oil and reaches the liquid level.

However, at Plant 410, the standard operating procedure is to completely squeeze out the old oil with new oil, so as to avoid the impact of contaminated old oil on the equipment.

In addition, in the same workshop, the working conditions of the belt conveyor used to transport sand are also quite harsh, and its rotation mechanism and driving mechanism have even been buried by waste sand almost half.

I didn't call the police today, I can only say that I was lucky.

(End of chapter)