Early the next morning, the jeep that came to pick him up stopped at the door of his house, and when he saw the driver in the car, Xu Damao was confused.

"This is Wei Baoguo, Xiao Wei, who will be my full-time driver from now on." Jiang Yan introduced them to the driver assigned to him by his superiors, but Jiang Yan did not tell them his specific identity.

Only Xu Damao and Jiang Yan got into the jeep together, and the two of them rode the "nephew" and walked towards the rolling mill together.

"Boss, the factory director asked me to call you to a meeting, and today the big leaders of the first machine department also came to attend the meeting." Not long after entering the factory to work, Xu Damao came to his office.

"Okay, wait for me, I'll pack up and we'll go over together."

When Jiang Yan arrived in the conference room, there were already a lot of people sitting in the conference room, and the middle-level and above cadres of the entire rolling mill had already arrived in the conference room.

After Jiang Yan entered, he quickly found his place and sat down.

After about ten minutes, the conference room was already full of people, and the big leader sitting on it turned his head to Director Yang next to him and said, "Everyone has arrived!" ”

Hearing the words of the big leader, Director Yang silently counted the people below in his heart, raised his head and said to the big leader: "The people have arrived." ”

The big leader nodded after listening, he slapped the speaker in front of him, and then opened a document in front of him.

"According to the requirements of the superior leadership, the original technical department of the rolling mill will be independent to form a new research institute, code 665, specializing in the research and development of special steel, machinery manufacturing and other equipment, the level of tentative department-level scientific research units, under the direct leadership of the Ministry of Machinery, Comrade Wang Honghai was appointed as the first director and secretary of the institute, presiding over the overall work."

The big leader paused when he said this, and a man sitting below who was about forty years old and had a Chinese character face stood up and looked in all directions, this is Wang Honghai, the newly appointed director of the research institute above.

The reason why a director was airborne above was also to pass the anger with Jiang Yan, the purpose was to allow Jiang Yan to concentrate on scientific research tasks, and to protect Jiang Yan, after all, Jiang Yan is only twenty-one years old now, and his age is really a little younger

These bigwigs still understand this truth, they don't want to kill Jiang Yan, just what he has done in the past few years since he came back, everyone has seen it.

However, the two of them are at the same level, both are level 13, department level, and they also talk to Wang Honghai specifically, and Jiang Yan still has the final say on matters related to scientific research.

Jiang Yan is also very satisfied with the above arrangement.

Immediately afterwards, the big leader spoke: "Comrade Jiang Yan is appointed as the chief engineer of the research institute to preside over scientific research tasks, and Jiang Yan is relieved of the post of chief engineer of the third rolling mill at the thirteenth level and changed to a consultant. ”

As soon as this news came out, there was an uproar below, in fact, everyone knew that Jiang Yan went out to complete a lot of tasks this time, and also knew that Jiang Yan would be promoted, everyone thought that he was going to become the deputy director of the rolling mill, but they didn't expect that the country directly established a new scientific research unit, and the news was really too exciting.

"The higher authorities decided to establish an experimental site for the integration of production and research, and the experimental units are the 665 Research Institute and the Third Rolling Mill."

As soon as the big leader's words came out, everyone below was in a state of confusion, what is this integration of production and research, no one has heard of it, and everyone's eyes can't help but look at Jiang Yan who is sitting there.

This establishment of the integration of production and research is an idea put forward by Jiang Yan in a meeting with a group of bigwigs before, in fact, this integration of production and research is very common in the later stage.

Specifically, industries and scientific research institutions cooperate with each other to give full play to their respective advantages and form a strong advanced system integrating research, development and production.

Through industry-research cooperation, both sides can give full play to their respective advantages, share resources that they cannot obtain, and promote the transfer and transformation of scientific and technological achievements and the transformation of scientific and technological innovation into real productivity.

The reason why Jiang Yan put forward such a point of view is because it is in the history that he is familiar with

Our universities, scientific research institutes, and enterprises operate on different tracks, and there are not many that can be deeply combined, and resources have caused a lot of waste. Part of it is because of the asymmetry of information, which was originally a technology that has been researched in scientific research units, and China still has to spend a lot of money to buy it.

For example, in 1958, Sijiucheng No. 1 Machine Tool Factory cooperated with Tsinghua University to trial-produce China's first CNC machine tool - X53K1 three-coordinate CNC machine tool. The birth of this CNC machine tool has filled the gap in the field of CNC machine tools in China.

However, at that time, we did not have enough understanding of the characteristics and development conditions of CNC machine tools, and blindly developed in the case of poor personnel quality, unreliable foundation and unqualified quality of accessories, and finally terminated because the performance was too bad to be used for production.

As a result, China's machine tool industry has lagged behind the world for 30 years, which can not but be said to be a regrettable.

Don't look at a small machine tool as inconspicuous, it is the cornerstone of the country's strength.

In order not to repeat history, Jiang Yan could only bite the bullet and say some of the reasons for the lag of China's machine tools in this report.

In order to avoid China's machine tool industry to go back to the old road, Jiang Yan at the meeting a large number of evidence analysis, and put forward that there are two important development directions for the machine tool industry in the future, "to intelligent production as the goal" and "to improve the standard of single machine" as the goal.

"With the goal of intelligent production", that is, the machine tool will have a communication function to realize the real-time interconnection between the machine tool and the machine tool, the machine tool and other production equipment, and the machine tool and the management center. The core of "raising the standard of stand-alone" is "higher, faster, stronger". The development of machine tools has always been closely focused on the improvement of the three core indicators of precision, speed and performance, and finally to meet the processing needs of new materials and new industries, and to achieve the purpose of reducing costs and improving efficiency. Therefore, additive manufacturing, the compounding and specialization of stand-alone functions are the focus of innovation in the future.

At the meeting, Jiang Yan also used Hansiguo as an example to illustrate. It is also pointed out that the machine tool industry is a process of high technical threshold, high professional division of labor and long-term accumulation.

It is also pointed out that China's industrial foundation is not solid, the "nutrients" are poor, and there is no complete machine tool industry research and development system, which seriously restricts the development of China's machine tool industry. At the upstream design and manufacturing end, China's foundation in materials, parts and experience is weak, and it is difficult to support the realization of comprehensive independence in the field of high-end machine tools; At the downstream application end, without imported raw materials, high-end machine tools are as useless as "scrap copper and rotten iron" in China.

It was precisely because of Jiang Yan's bold explanation at this meeting that the leaders took the newly established branch research institute and the third rolling mill as pilot factories, and at the same time issued a document requiring the domestic "Eighteen Arhats" machine tool factories to work hard to improve their internal skills. Resolutely put an end to them embarking on the road of "greed for speed".

However, the consequence of Jiang Yan's doing so is that his security level has been raised by the leader again, but Jiang Yan still has no regrets.

(End of chapter)