In the research institute, Jiang Yan happened to be alone in the office with the materials brought by the technician to review, he picked up a pencil from time to time to revise the design, his brows were tightly locked, and he looked engrossed.

Just then, there was a knock on the door

"Come in"

As soon as the words fell, his secretary walked in.

When the secretary saw Jiang Yan, who was concentrating on his work, he paused and said, "Leader, Director Yang of the rolling mill will come to see you in a while."

Hearing this, Jiang Yan was slightly startled, raised his head, and put down the pen in his hand.

"Is something wrong?"

Jiang Yan knew too well about his old factory director, this guy was the master of the Three Treasures Hall for nothing.

"Leader, that's right, a large machine tool was damaged in workshop 3 of their rolling mill due to the operation error of workers, and their technicians couldn't solve it after seeing it, so they came to you.

Jiang Yan nodded when he heard the news.

"Let's go! Let's take a look. After Jiang Yan finished saying this, he put down the pen in his hand and stood up directly.

"Let's not wait for Director Yang here." The secretary asked.

After hearing this, Jiang Yan glanced at him. "Don't be so troublesome, I'm still a consultant at the rolling mill, you go and call Director Yang to tell him not to use it, I'll go over and see the situation first."

Almost all the guards of the rolling mill knew Jiang Yan, the former chief engineer, and the car Jiang Yan was in drove directly into the factory.

"Ahh Mr. Jiang, you are here. As soon as he arrived at the gate of workshop 3, Li Jianrui ran out when he heard the sound of cars outside, and as soon as he came to the door of the workshop, he saw Jiang Yan walking inside.

"Xiao Li, what's the situation?" Jiang Yan saw Li Jianrui and asked directly.

"Jiang is always like this... Then Li Jianrui told Jiang Yan about the damage to the machine.

Jiang Yan nodded after hearing this, and when he walked into the workshop, the first thing he saw was Yi Zhonghai and Yan Jiecheng, who were standing on the side with ugly faces.

Yi Zhonghai's face turned blue and white for a while, and Yan Jiecheng's face was even pale, he didn't dare to look at people with his head down, his whole body was trembling slightly, and there was a faint special smell coming from him.

Li Jianrui told himself just now that the main person in charge of the damage to this machine tool is Yan Jiecheng.

But now Jiang Yan couldn't take care of the two of them, and strode directly to Director Yang in front of him, and said in a calm tone: "Director Yang, Xiao Li said that there was a problem with the machine tool here?" I'll take a look. ”

When Director Yang saw Jiang Yan walk into the workshop, his face suddenly relaxed.

He stepped forward to greet him and said, "Xiao Jiang, it's great that you can come over, come and take a look at this machine to see if there is any need for maintenance." If it can be repaired, please try to fix it. ”

Jiang Yan smiled and said to Director Yang: "I'll check it out." If the damage isn't too severe, it should be dealt with quickly. With that, he walked over to the machine and took a closer look at the damage.

Because Jiang Yan knew this large machine tool very well and was very skilled in operation, I saw him open the machine shell, first check the connection between the transmission shaft and the gear, and then check the hydraulic system pipeline. He took out his notebook as he checked it, making an "um" sound from time to time.

After the inspection, Jiang Yan pondered for a moment and then calmly spoke: "Director Yang, please rest assured, I have roughly understood the problem of this machine tool." There are a lot of damaged parts, but fortunately the most important bearing is not damaged, and if it is fast, I expect that all of them will be repaired today, and the machine will be back to normal operation. ”

"What? Can it be fixed today?" Director Yang and Li Jian's eyes widened at the same time, looking incredulous.

Jiang Yan's words were heard word by word by the workers, and the workers of the rolling mill also showed surprised expressions when they heard this, and they all focused their eyes on Jiang Yan.

Can this large machine be completely repaired in a day? It's a fantasy for them.

"Why, the factory director doesn't believe in my craftsmanship." Jiang Yan said with a smile

Hearing this, Director Yang hurriedly said: "Xiao Jiang, you misunderstood, I don't believe you, are you a little too optimistic in this world?"

Jiang Yan responded indifferently: "Director Yang, don't worry, I have checked, the damage to this machine tool is mainly a few transmission devices, not the core structure, and you should know how this machine came about, I can quickly draw the design drawings of these parts, and then find a few skilled workers to remake and install it." So it's not a problem to finish the fix today. ”

"Ahh Yes, yes, I almost forgot if you didn't say it. ”

When the workers heard it, repairing the machine was as simple as changing the tires of a car, just remove the tires and put on a new tire. So lightweight. But the internal structure of this machine is no less complex than that of a modern car, and it is impossible for them to repair a single part of a project in an afternoon.

"Yes, but some parts need to be solved by an eighth-level worker." Jiang Yan said.

"No problem, I'll coordinate, you just do it. We will leave it to you to deal with, and we will definitely meet the manpower and resources you need. Director Yang said very happily.

"Okay, I'll start working here, and Xiao Li will make a record." Jiang Yan bowed slightly, and then began to inspect the machine intently.

When Li Jianrui heard Jiang Yan's order, he began to record with an excited face.

He first took out his notebook, while checking the internal structure of the machine tool, while quickly drawing a schematic diagram of the relevant parts, and then checked the damaged parts one by one, constantly comparing the drawings he made, everyone present stared at Jiang Yan intently, for fear of missing any of his actions.

Li Jianrui is even more so, at this time he is like a primary school student.

After more than an hour of hard work, Jiang Yan finally finished drawing all the required machine tool parts schematic diagrams.

He sorted out the drawings and handed them to Director Yang: "Factory Director, I have finished drawing all the parts drawings I need, please arrange workers to make parts according to these drawings."

"So fast?" Director Yang took the drawings with some surprise and looked up and down.

Li Jianrui and other technicians also came over, all looking at the drawings in their hands suspiciously.

However, when they looked closely at the drawings, everyone's eyes widened and their faces were full of shock.

"That's too neatly drawn, isn't it?" Li Jianrui looked at Jiang Yan and then at the drawings, and couldn't help but sigh.

"It's printed!" The technician next to him was also amazed.

"Every line is so smooth and standard, you can't see the hand-drawn brushstrokes at all."

"If I paint it, I'll have to paint it for a day."

Everyone praised the exquisiteness of the drawings word by word, and they couldn't believe that this was really Jiang Yan's temporary hand-drawing.

Director Yang's face was also full of surprise: "Xuecheng, why do you paint so beautifully?" You just had a notebook in your hand, no drawing tablet, right?"

Jiang Yan smiled indifferently: "I have a special set of skills, so I can draw standardized drawings by hand." There is no problem with the schematic diagram of these parts, so please feel free to use them. ”

Director Yang checked the drawings again, waved his hand and ordered: "Okay, immediately arrange workers to make the required parts according to these drawings, and we must repair the machine tool as soon as possible!"

"Roger, Director!" The technicians sprang into action and quickly left with the drawings that shocked them, making production plans.

"Everyone is working on these parts as soon as possible, and the time is short. If you have any questions, please come directly to me. Jiang Yan also added.

"Yes, we'll do it as soon as possible!" Several people hurriedly answered, mustered up enthusiasm and started work.

Only then did everyone finally understand why Jiang Yan could say so calmly that he could repair this machine tool today.

He does have amazing skills and abilities to make a task that should be incredibly complex one to the next level.

As soon as Yi Zhonghai heard that he was going to process parts according to Jiang Yan's drawings now, his eyes immediately lit up, and he felt that this was a great opportunity for him to perform.

He hurriedly straightened his waist, strode up to Director Yang, and said excitedly: "Director Yang, leave the processed parts to me!" I've recently taken my craft to the next level and can definitely produce the best quality parts. ”

Director Yang looked at Jiang Yan who was standing next to him.

Jiang Yan thought about it and said lightly. "Master Yi's craftsmanship is still good."

Hearing Jiang Yan's words, Director Yang thought about it and nodded, "Okay, then you can process one and try it."

Yi Zhonghai thanked him repeatedly, his face flushed with excitement, but he knew that he was able to process thanks to Jiang Yan, so he glanced at Jiang Yan gratefully, and Jiang Yan still nodded with a smile.

He couldn't wait to sit down in front of the vice he was most familiar with, and pick out a drawing of a part that seemed to be difficult.

At this time, Chen Feng also walked over, looked at Yi Zhonghai seriously, and said angrily: "Master Yi, I warn you, you can't make any mistakes this time." This is a drawing drawn by Mr. Jiang himself, you must carefully check each process parameter, don't miss it again. ”

Yi Zhonghai said respectfully: "Director Li, don't worry, I will definitely do it carefully this time, and there will never be any more mistakes."

Yang Feng snorted, glanced at him suspiciously, and then slowly paced away.

(End of chapter)