After the big leader laughed, he directly closed the notebook and sat next to Jiang Yan, and when he came over, he took a box of barreled cigarettes without identification from the drawer and put it on the table.

"This thing is a special cigarette, according to the level of ginger, there will only be a bucket during the New Year's holidays, and this cigarette is smoked and kneaded."

As soon as the big leader was placed on the table, Jiang Yan opened it, and after giving Wang Honghai and the big leader one each, the rest was picked up by Jiang Yan.

"You guy is a living bandit, you don't leave empty-handed when you come to me, okay, take out this barrel and smoke it, where do I have two barrels to go back and you take it, go back and I'll apply to the top, and add a barrel of such cigarettes to you every month."

Hearing this benefit, Jiang Yan replied with a hippie smile: "That's a good feeling, big leader, the doctor doesn't say that your regular smoking is not good for your health, I am also reducing the burden on you." ”

Listening to Jiang Yan's shameless and justified words, the big leader didn't know what to say for a while, and Wang Honghai's envious eyes next to him were red, and he didn't have such treatment here as the old chief.

"How are you going to produce?" The big leader took a puff of cigarette and asked Jiang Yan.

Hearing the words of the big leader, Jiang Yan was a little silent, originally Jiang Yan was going to use an electroslag furnace to produce, and the quality of the products produced in this way should be the best. However, it can also be produced by adding alloying elements in the oxygen top blowing converter, but the alloying elements put in it need to be refined, because these metals are not refined, and the quality of the production is poor.

However, there are advantages and disadvantages of these two, although the production of electric slag furnace is said to be of relatively high quality, but its electricity is still extremely terrifying, according to Jiang Yan's calculation, three electroslag furnaces are fully produced, almost using up nearly a layer of electricity in the power plant. It's just that the power supply is relatively tight now, and it is estimated that the production can only be carried out in the middle of the night during the first period of time. This is also a helpless thing, it is impossible to prevent others from using electricity in order to produce alloy steel!

Therefore, when the power plant is not expanded in place, the electroslag furnace can only be produced during the trough period of electricity consumption at night, which also puts forward high requirements for future management. You must know that there are many dangerous operations such as high voltage, high temperature, hoisting, etc., and more importantly, the drawings of this electroslag furnace are still in Jiang Yan's space, and there is no ready-made equipment, so you need to build an electroslag furnace first.

The cost of adding alloying elements to the oxygen top blowing converter is relatively low, but the things produced will be worse, and the waste products will be relatively high, and Jiang Yan can't make up his mind now.

The big leader saw that Jiang Yan's face was a little gloomy and uncertain, so he said: "If you have any new ideas, just say it, I will try to do what I can, and I will find a way if I can't do it, as long as it is for the good of the country, even if I let out my own old face." ”

Hearing the words of the big leader, Jiang Yan's heart calmed down a little, and he told the big leader his thoughts.

After listening to Jiang Yan's statement, the big leader was silent for a while, lit a cigarette, took a puff, and then leaned his back against the sofa in his office, changed to a more comfortable position, and then continued to speak.

"Xiao Jiang, is this electroslag stove you said so good?"

Hearing the big leader's question, Jiang Yan told the big leader about the working methods and advantages and disadvantages of the electroslag furnace.

Due to the de-enclusion effect of the slag liquid and the good crystallization conditions, the electroslag remelted metal has good purity, fine and uniform as-cast structure, no white spots and growth ring-shaped segregation, very low sulfur content, and fine and diffuse inclusions. Therefore, electroslag remelting is in a monopoly position in the production of large and medium-sized forgings and module blanks, and has an absolute advantage in high-quality tool and die steel, martensitic aging steel, duplex steel tube billets, and cold-rolled roll electroslag steel. Electroslag furnace is an indispensable production equipment for special steel mills.

Electroslag metallurgy also has three basic functions: heating, refining and sequential crystallization.

After listening to Jiang Yan's introduction, the big leader nodded.

"The drawings are all ready-made, and there are basically no technical difficulties, as long as they are processed, they can be assembled." Immediately after that, Jiang Yan opened his mouth and said another sentence.

"Then since they are all ready-made, let's also build such an electroslag furnace, you don't have to worry about electricity, I will go to the power bureau immediately to coordinate the use of electricity, no matter what, we must ensure the demand for production."

Jiang Yan felt a lot more relaxed when he heard the words of the big leader, and with the help of the big leader, this project will definitely be able to be produced smoothly.

After chatting about this, the big leader then asked: "What are you going to do with these alloy formulas, what do you think?" "The value of these formulas provided by Jiang Yan is too high, think about the benefits of an alloy formula in Da Mao, now there is a full copy here, the value is too high.

Jiang Yan also had an idea about this, so he said: "I think so, first of all, according to the research direction of each research institution, the formula will be distributed to each research institution as appropriate, and they will be responsible for research and production, and after they have completely understood the technology, send people to the corresponding production unit to be responsible for production, of course, these need to do a good job of strict confidentiality." ”

"And according to my formula, the research institute can conduct extended research, and the production organization can ensure which metal is put into production, and then we will number this metal, and then organize it into a book, and mark the detailed performance clearly. Then the booklet will be distributed to each user, they can choose the corresponding type of material according to their needs, and then we can produce the corresponding type of steel according to their needs. ”

"Every once in a while, we sort out the research results of various research institutions, and when they can be mass-produced, we will add the new material varieties to the booklet, revise them, and distribute them. In the future, we can form a chain from research to production and then to application, and the user unit does not have to study various metals by itself, so that a large number of talents can be saved, and these talents can join the various research institutes, and professional things are done by professional people, they only need to choose from the brochure according to their needs, and the research institute can be concentrated to do great things. ”

"Of course, if each user finds certain properties or defects in the metal, they can also give us feedback, and after verification, they can also add it to the booklet, and the formula they find can also be submitted, and it can also be added after review. In this way, as long as we implement it for a period of time, our material formulations can be greatly enriched and can support many of our research. Many of our projects now, maybe just to improve the properties of the material, can be solved very quickly. ”

Listening to Jiang Yan's thoughts, the leader's heart is excited, now some projects can not break through, that is, the material performance can not keep up, as long as a little overload, the accessories can not stand, now with excellent materials, many problems can be solved quickly.

Now the main problem of machinery, one is the processing capacity, the other is the material is not up to standard. The ongoing machine tool project is to solve the problem of processing capacity, and this formula can basically solve most of the current material performance problems.

Jiang Yan saw the excited expression of the leader now, this is the rhythm of running to ask Jiang Yan for credit, so he hurriedly said: "I think it's best to deal with this matter of the big leader in a low-key manner, we are still very weak now, and we are guilty!" One or two good recipes are a good thing, but having dozens or even hundreds of good formulas that no one else has is a bad thing. ”

"Recently, we are producing alloy steel, and I want to keep it secret. For example, if you number the steel now, for example, you need to add five alloying elements, then when producing, we will fix the amount of the main steel, how many tons of a furnace. Then the alloying elements taken from the alloying element factory are weighed in advance, and they are only marked with numbers, and they can be directly added to the rolling mill according to the numbered number. ”

Jiang Yan's idea is very clear, in a short period of time, that is, the manufacturer grasps the amount of steel, the alloy element factory grasps the amount of alloying elements, and uses as much as possible, and keeps it confidential as much as possible. In this way, neither factory knows the specific formula, only what number of materials are produced, the purpose of the materials, and the properties of the materials are not clear. And the recipe is only in the hands of the higher authorities, so that it can be kept secret for as long as possible.

That is, now it is necessary to let as few people know the material formula as possible, only in this way can we keep the secret that Jiang Yan has so many material formulas, otherwise Jiang Yan will be in danger. However, at this time, the leader had no way to make a decision, and could only report to the superiors to determine how to deal with it.

In this way, Jiang Yan and Wang Honghai returned to the research institute, and the follow-up was not something that Jiang Yan could decide.

(End of chapter)