At five o'clock in the afternoon, the staff came to Jiang Yan's side and told Jiang Yan that the required parts had been produced, Jiang Yan subconsciously glanced at his watch, and it was less than three hours since he completed the disassembly.

"Comrade Jiang Yan, the new parts have been processed, and the leader asked me to call you over to see if the parts produced are applicable." At five o'clock in the afternoon, the staff came to Jiang Yan's side and told Jiang Yan that the required parts had been produced.

"Okay, I'll go over here." After Jiang Yan nodded, Jiang Yan subconsciously glanced at his watch, and it was less than three hours since he completed the disassembly. Then, with the staff of the research institute, I went to assemble the machine.

After Jiang Yan got the new parts, he took a look, ran and then touched it with his hand, the parts were very smooth, and he couldn't feel the burrs, he took the vernier caliper and measured it, and then nodded. "Well, yes, the tolerances are all within acceptable limits."

"It seems that Liu Gong, who took the initiative to undertake the processing task, does have two brushes on hand."

Due to the high precision requirements, all the domestic machines may not be able to process such precision, can only roughly process a blank, and the rest can only be processed by the seventh-level or eighth-level workers little by little manual processing, which can be processed out of such a level is also quite powerful.

Everything was ready, and Jiang Yan was ready to start assembling this precision equipment.

At this time, Lao Huang and Leader Zheng also came back from Minister Lu and rushed to the scene, so Lao Huang directly proposed: "That Comrade Jiang Yan, I suggest that before you assemble this precision equipment, it is best to look back at the video you took when you dismantled the equipment just now. ”

Lao Huang felt that even if Jiang Yan had the ability to never forget, but from the beginning of the dismantling to the beginning of the assembly, at least four or five hours have passed, and some memories are not very accurate.

However, after Jiang Yan glanced at Lao Huang with a smile, he decisively rejected the proposal.

It's already five o'clock, and if you look at the replay again, two or three hours will pass from the time you prepare for the screening to the time you finish watching it. If you wait to assemble the machine after watching the replay, it is estimated that it will take a few hours, which is too much delay, and as for their worries in Jiang Yan's place, there is no such thing at all!

"I don't need to look at it, I remember every step and part when disassembling this equipment, just start directly." Jiang Yan opened his mouth confidently

Since Jiang Yan was so sure, Lao Huang didn't say anything more, and motioned to Leader Zheng, who was just about to speak, with his eyes, and waited for the development of the situation.

However, the people who came to see how to assemble it felt that "this Jiang Yan is a little too conceited, if there is any problem in the assembly process, see how this Jiang Yan comes to the stage." ”

However, this professional who wants to see Jiang Yan's jokes will probably be disappointed.

As Jiang Yan said, his knowledge of the structure of this precision equipment, the various parts in it, the installation steps that were deduced backwards, and even the detailed data of various parts were deeply imprinted in his mind.

So, when assembled, there is not the slightest dragging mud and water.

"What a speed!"

"Can you ensure the correct assembly if you install it so quickly?"

Seeing that Jiang Yan's assembly speed was too smooth and fast, some people couldn't help but be worried, and at the same time, Lao Huang and Zheng Leaders, who were watching him assembling the machine, were very surprised, and the two of them glanced at each other as if all this was silent.

Although Jiang Yan has been assembling smoothly, after all, it is a relatively sophisticated machine and equipment, and Jiang Yan's assembly time is much longer than the time he took to disassemble. When Jiang Yan even had time, he even had to stop and think about it, every time he stopped, everyone at the scene didn't dare to come out.

Because the time is too long, the time at the beginning is naturally a little slower, but as the assembly gets faster and faster, Jiang Yan's speed gradually stops, so that now it is not Jiang Yan himself that is dragging down Jiang Yan's speed, but those parts that are labeled, bagged or boxed separately.

Jiang Yan followed the reverse order, after receiving a part, for the sake of insurance, he had to first look at the label on the bag or box containing the parts, and then look at the parts in the bag. And only then do the assembly begin.

It's like the surgeon in the operating room, who takes the surgical tools handed by the assistant and has to take a look to see if they are handed by the wrong one.

After all, it is not uncommon for mistakes to occur in the busy, especially when the speed is fast, the greater the probability of this kind of error, and as a result, Jiang Yan found that the parts handed over by the assistants had different time numbers.

In order to reduce the chance of making mistakes in this busy, Jiang Yan did not let them take the parts out of the bag or box, but handed them directly to him, and after confirming that the parts were correct, he took out the parts to assemble, and then took out the parts to assemble, one more such step, although in the smoothness of the assembly, it had no impact on Jiang Yan, but the corresponding time was increased.

However, the person who recorded Jiang Yan's assembly order next to him was a little panicked, there was a time when the two parts were too identical, and he didn't pay attention to this one, so he didn't know which one was which, but fortunately, Jiang Yan was recording the whole process from the beginning of the assembly, and the master who had time to record had to remind Jiang Yan to slow him down a little.

"That's it!" Finally, after three hours of continuous fighting, Jiang Yan finished assembling the machine and equipment, and Jiang Yan breathed a sigh of relief when he looked at the assembled machine.

"This hand is raw, if you let yourself assemble it a few times, at least the speed can be doubled."

After the assembly, the next step is the test run, Lao Huang saw that Jiang Yan had finished assembling, and immediately greeted the relevant staff: "Xiao Wang, Xiao Li, you two organizers, pull this equipment into the machine room, and in the process of handling, you must pay attention to safety." ”

After speaking, Lao Huang turned his head to Jiang Yan and said, "Comrade Jiang Yan, wait a minute, you will also go over." ”

"Okay," Jiang Yan replied with a nod

Due to the secrecy of the computer room where this precision equipment was placed, except for Jiang Yan, no one from other research institutes was allowed to follow in.

And let Jiang Yan follow in, Jiang Yan is the one who comes to repair the professionals, and his own level of secrecy is relatively the highest. There is also Jiang Yan who is the main force in dismantling and repairing this machine and equipment, so Jiang Yan is also afraid that there will be an emergency, and Jiang Yan can deal with it in time.

And the professionals in the maintenance room are talking about it.

"I wonder what the final result of the test will be?"

"It's hard to say."

"There's nothing to say about disassembling and finding out the problem, but the final assembly, it seems that there is no guarantee that it will be correct."

In the workshop, the discussion was quite intense, and some comrades even directly picked up the notebook recorded by the recorder and looked at it.

After about half an hour, Leader Zheng smiled and returned to the maintenance room with Jiang Yan.

"Comrades, after testing, the equipment is functioning normally."

"Congratulations to everyone on the successful completion of the maintenance of this equipment, thank you, everyone has worked hard!"

After speaking, Leader Zheng held Jiang Yan's hand again and said:

"Thank you, thank you Comrade Jiang Yan!"

Jiang Yan replied politely: "Leader, you are polite, you have thanked you several times, this is what I should do." ”

Leader Zheng did thank Jiang Yan several times, and when the equipment was running normally in the equipment room, he thanked Jiang Yan excitedly.

(End of chapter)