In the next month, Jiang Yan looked at each workshop one by one, figured out the situation of each workshop, and then held a meeting with the leaders and the director of the workshop.

After the initial run-in, the enthusiasm of the workers began to improve, and the entire production capacity was greatly improved.

However, when Jiang Yan was busy restructuring all the workshops of the institute, he did not forget the tenth workshop, and the task had been arranged.

The transformation of the new Fifth Master and the Zhan-6 aircraft is progressing steadily, which does not make Jiang Yan worry too much, but just solves their problems from time to time.

Zhan-7 aircraft Jiang Yan drew three aircraft sketches, one is the original forward air war-7 aircraft, one is the lower air intake aircraft, and the other is the untimely war-7MF in later generations, which is known as "Little War Ten" in the eyes of the majority of military fans in later generations

Historically, due to the limitations of the innate design of the Battle-7, various modifications of the Zhan-7 have not been able to improve by leaps and bounds. The Zhan-7MF launched by Rongcheng Aircraft Manufacturing Company is a bold attempt to break this "fate".

Although the Zhan-7MF has been greatly improved and improved compared with the current main model of the Chinese Air Force, the Zhan-7MF, it is still a second-generation or two-and-a-half-generation fighter. At that time, our country already had a new type of Battle-10 aircraft with better performance.

The improvement of the Zhan-7MF does not play a sufficient role in improving our army's air combat capability, and it may be a waste to spend limited resources on such a fighter that is neither high nor low. After all, there is no practical point in building more fighters that do not meet the basic requirements of modern air combat.

However, if the Zhan-7MF aircraft is placed in Jiang Yan's year, it is a proper advanced fighter, and it is found in the confrontation project that the Zhan-7MF fighter can basically compete with the third-generation aircraft, and if it is replaced with a more advanced aircraft engine, it is also a leader in the third-generation aircraft.

Although our current aviation industry is still in its infancy, Jiang Yan does not mind setting the starting point of this initial stage a little higher, even if it cannot be developed immediately, it will also lay a solid foundation for the development of aircraft in future generations.

The appearance drawings of these three types of aircraft were handed over to the special studio, and Jiang Yan asked them to build the foreign trade of the aircraft according to the model, and now they have their own wind tunnel, and they just blow out the advantages and disadvantages of the aerodynamic performance of these three aircraft.

Shengjing Aircraft Engine also came good news, after Jiang Yan and their group of experts signed, the plan to give priority to the development of the core aircraft was quickly approved by the superiors, Shengjing Aircraft Engine Factory is ready to introduce the Mao Xiongguo R11F-300 turbojet engine as a blueprint for the development of China's own core aircraft.

After the other three laboratories were arranged, Jiang Yan focused all his energy on the precision equipment imitation project team.

I have to say that this group of painting personnel sent by the superiors is quite professional, after Jiang Yan's decomposition, there are tens of thousands of large and small parts in this precision instrument, which are painted by Jiang Yan himself, which is the year of the monkey.

Before Jiang Yan installed and took photos and photography in the base, Jiang Yan also asked for back, these things are a great help to Jiang Yan, with the pictures of these parts, Jiang Yan only needs to dictate the specific parameters of these parts, and the staff will draw the drawings of this part according to Jiang Yan's requirements after recording.

At the beginning, Jiang Yan cooperated with them, they were still a little rusty, and the drawings that they had time to draw had some flaws, after a period of running-in, basically Jiang Yan only needed to say anything, and they would soon be able to understand it, and the speed of drawing was also accelerating.

In these years, what is important is a dedication, so much so that Jiang Yan was forced to start working overtime. However, with the participation of so many people, it took almost a month to draw, and after the drawings were drawn, Jiang Yan reviewed them one by one, and only arranged production after confirming that they were correct.

In this era, this precision machine and equipment represents the high precision in the field of machinery and equipment, which is not only advanced in technology, but also plays a huge role.

Otherwise, my rabbit would not have gone through special channels, and at a huge cost, I would have to get such a machine back.

In order to get this precision equipment, comrades on all fronts overcame unimaginable difficulties to complete this arduous and abnormal task!

And after today, all this will be different, as long as Jiang Yan can smoothly assemble this imitation precision equipment, then I rabbit, there will be a high-precision technical level, and the role of the precision equipment is huge!

With a second one, there will be a third, a fourth, and more to come.

Being able to imitate this kind of sophisticated and sophisticated equipment at a sophisticated level of technology will not only save a lot of foreign exchange for the country, but also allow our comrades on all fronts who are fighting abroad to no longer have to take huge risks to get such a machine back.

Even, we can independently manufacture this kind of high-precision precision equipment, even if it is only one or two more units produced, it is possible that my rabbit can speak so much more in the international arena.

"Leader, a new batch of parts is starting to enter the field, and Technician Zhou asked me to come over and inform you of the past." Secretary Xiao Gong came to Jiang Yan's office and told Jiang Yan.

"Okay, I'll go over here." Jiang Yan packed up his things, stood up, and prepared to test this batch of parts to the warehouse.

From the beginning of their drawing, every time the drawings are drawn, Jiang Yan will arrange relevant personnel for production, due to special needs, Jiang Yan for the processing parts of the workers are also relatively high, after the coordination of the two departments, Jiang Yan they have a large number of senior workers in the tenth workshop, so that Jiang Yan their tenth workshop in the lowest industry is also a total of drivers, in each factory can be used as the treasure of the town factory eight workers also have four work here, but so the strength of the tenth workshop of the institute is absolutely strong.

Most of the parts have been produced, this batch of parts is basically the core parts of this machine, the precision of the parts is high, unprecedented, so in the production of this batch of parts Jiang Yan told them that this batch of parts are all produced by workers above the seventh level, and now I heard that this batch of parts has been produced, Jiang Yan is called an excitement, after the last batch of parts into the factory, the test is accurate and can start assembly.

The last batch of processed parts, and some electronic components that need to be allocated by the superiors, are now all in place, and seeing that the warehouse is still with warm parts, I don't care about emotion, so I directly picked up the tools and began to test. After testing, most of the parts are qualified, and the problem of insufficient accuracy of some parts has been solved after Jiang Yan has done a little refinement.

(End of chapter)