Qingcheng Branch of Kyushu High-end Machine Tool Research Institute.

In the office, Zhou Ran, who had white hair, wore black-framed glasses, and revealed a burst of majesty between his eyebrows, raised his fingers and tapped the desktop with a rhythmic beat.

At the same time, he also raised his head from time to time to look out the window in the courtyard to see if there was a car driving in.

But every time, there was a slight disappointment in his eyes.

"I said I went back in an hour, why haven't I come back? It stands to reason that I will be back in about half an hour at most. Zhou Ran stood up and paced back and forth in the office, with an anxious expression on his face.

When He Wei told him that he had brought two ultra-high-precision machine tools from somewhere, which may be produced by Yamazaki Mazak Company, the latest high-end machine tools, he rushed over from the capital non-stop, the purpose was to see these two ultra-high-precision machine tools as soon as possible.

Recently, the high-end machine tool industry in Kyushu has been blocked by Yamazaki Mazak Company, resulting in the loss of foreign orders from several large factories at the head of the industry, and there are few domestic orders left, and they may even face the risk of bankruptcy.

In this case, as a researcher dedicated to the study of Kyushu's high-end machine tools, he was heartbroken, and even fell into deep self-blame for a while.

After all, if he could have developed Kyushu's high-end machine tools earlier and conquered the corresponding technology earlier, he would not have faced the current situation.

But even if he blames himself, it is useless, he is now more eager to see the two ultra-high-precision machine tools, and he also wants to see if they are really ultra-high-precision machine tools.

Just when he waited so anxiously that he even felt that his days were like years.

Thundered.

He heard the sound of a car entering the compound outside the window, and he immediately raised his foot and walked to the window, and then saw two military off-road vehicles driving into the compound with two huge transport vehicles transporting huge goods.

Here it comes! It must be an ultra-high-precision machine tool that is coming!

Zhou Ran immediately turned around and ran outside, but as soon as he opened the door of the office, he saw the scientific researchers of the institute raise their hands, and before they could knock on the wooden door: "What's wrong?" ”

"No, it's nothing, Professor Zhou, I just want to tell you that Chief He came back with something......"

"I see."

Zhou Ran directly staggered the scientific researchers and ran outside.

It's finally here! Ultra-high-precision machine tools are finally here!

……

Inside the compound of the institute.

The two giant trucks were parked steadily in the compound, and with the sound extinguished, many scientific researchers also walked out of the R&D center and came here, watching the two giant trucks.

Afterwards, they saw several soldiers get out of the car, Li Wenshan, and He Wei got out of the car together.

Some of the scientific researchers present recognized Li Wenshan, but did not recognize He Weilai.

After all, Li Wenshan is the chief of the Qingcheng Garrison District, and He Wei is the chief of the Economic Reform Department in the capital, so it is possible that they know Li Wenshan, but they also cannot know He Wei.

At the same time, they were also interested in what the two giant trucks were loading.

No one knows what's inside, but if it can be delivered here, it must have something to do with the machine.

Moreover, some of them still know that Professor Zhou Ranzhou of the capital, an old-timer who has worked in the machine tool industry for many years, came to Qingcheng today, which means that something must have happened.

"Is it possible that this is an ultra-high-precision machine tool just developed by our country? It turned out that Chief Li was escorted, which is not low. ”

"How is it possible, even if it is researched, how can it be sent to us, Qingcheng does not have that kind of high-end machine tool manufacturer."

"That's right, how do you think this is going to be supplied to the big factories first, so you can't come to us for research, right? Don't. ”

"Yes, our equipment here is not good, it is far from the capital, no matter how you think about it, you can't come here to study."

"So what could it be? It can't be something that has nothing to do with machine tools. ”

There was a lot of talking, but they all tried to control the sound as much as possible.

And just as the crowd was talking.

Stomp and tread.

The sound of hurried footsteps came from the direction of the R&D center, and everyone followed the sound together, and then saw that Zhou Ran, who was full of anxiety, Professor Zhou, hurriedly walked out of the R&D center and trotted in the direction of Li Wenshan.

"Sure enough, it has something to do with Old Zhou!"

"Does that mean that this might really be a high-end machine?"

"Judging from Zhou Lao's appearance, this may also be a part of a high-end machine tool."

"It's possible ......"

In the midst of the discussion, Zhou Ran slowed down when he was about to run in front of Li Wenshan.

"Chief Li, it's hard work, Chief He, it's hard work." Zhou Ran raised his hand and saluted, his face full of anticipation.

The two saluted together and looked at Zhou Ran solemnly.

"Yes, Old Zhou."

"Old Zhou, we brought you back the things, why don't we unload them first?" He Wei proposed.

Zhou Ran hurriedly waved his hand: "No, don't use it, just open it directly, I'll just look at it here, it's not in the way." ”

He couldn't wait to unload the ultra-high-precision machine now, he wanted to see it now.

"Ah, okay, bring a ladder over here." Li Wenshan greeted the soldiers beside him.

After moving the ladder, Zhou Ran watched the rear doors on both sides of the giant truck be opened at the same time, and inside, there was a new ultra-high-precision machine tool with the shape and appearance of Yamazaki Mazak Company, the latest development, his whole person was excited, and his hands trembled slightly.

Although he still doesn't know whether this ultra-high-precision machine tool is real, he is already very excited to see an ultra-high-precision machine tool that looks so similar and exactly the same.

"Hurry up and help Zhou Lao, don't let Zhou Lao fall." He Wei greeted.

Several people each stretched out their hands and guarded on both sides of the ladder, and Zhou Ran climbed up in two steps as if he was incarnated as Spider-Man, and the speed was extremely fast, and he didn't look like an old man at all.

Coming to the cabin, Zhou Ran slowly leaned towards the ultra-high-precision machine tool, he raised his trembling hands and gently stroked the ultra-high-precision machine tool in front of him.

Like, it's so similar, it can even be said to be exactly the same.

The ultra-high-precision machine in front of him is exactly the same as that produced by Yamazaki Mazak, and it is exactly the same as the sample machine he saw at a previous exhibition.

To be honest, if He Wei hadn't told him in advance, it might have been fake, and he was almost sure that this was a real ultra-high-precision machine tool just by looking at it.

After all, it's so realistic.

Going around to the front of the ultra-high-precision machine tool, Zhou Ran noticed the precision CNC display on the surface, that is, the screen.

Raising his hand and stroking this screen, there is a layer of plastic film on the outside.

The touch of the touch is the touch that a CNC screen should have, and it is not at all the astringency brought by the ordinary display screen.

"It's not a black film pasted on, it's a real precision CNC display." Zhou Ran muttered to himself, looking at this ultra-high-precision machine tool intently.

His pupils twitched slightly, the remaining stubble at the corners of his mouth also shook with the rising corners of his mouth, and an excited smile appeared on his face.

But he didn't rejoice too soon, he hurriedly gathered his emotions and continued to observe the next device.

The length of an ultra-high-precision machine tool is nearly ten meters, and Zhou Ran has seen the entire ultra-high-precision machine tool step by step.

Truth be told, judging from the appearance alone, this ultra-high-precision machine is very realistic, exactly like the real thing.

In addition, he also paid special attention to the back position of this ultra-high-precision machine and found that there was a piece of transparent tempered glass, which could clearly see the distribution of parts inside.

This design, like the design of Yamazaki Mazak, is designed to ensure that you can always see what is going on inside and avoid accidents.

At that time, he had carefully observed, and this time, after observing this ultra-high-precision machine tool, he was surprised to find that it was exactly the same as the ultra-high-precision machine tool he had observed at the exhibition before.

Whether it's the distribution of the components or the mechanical condition inside.

If this is a fake ultra-high-precision machine tool, then Zhou Ran can also be sure that this is an ultra-high-precision machine tool with high imitation to the extreme.

In addition to the lack of accuracy, it may be completely comparable to a real ultra-high-precision machine tool in terms of appearance alone.

After going around, he nodded with satisfaction, and I have to say that through the appearance of the observation, this ultra-high-precision machine tool is no problem, but I don't know the specific accuracy problem, and how the use effect is.

Of course, it is not connected to the power supply now, and it is unlikely that you want to test the machine.

However, Zhou Ran also has a way to confirm whether this ultra-high-precision machine tool is a sample machine or a real ultra-high-precision machine tool.

At this time, everyone in the audience looked at Professor Zhou with puzzled eyes, watched Professor Zhou go back and forth, and looked at this ultra-high-precision machine tool from time to time to say something, and their curiosity was completely mobilized.

"No, what is Professor Zhou talking about? Can anyone see it? ”

"Good guy, who can see it from such a distance, but looking at Professor Zhou's appearance, could it be that this is a real ultra-high-precision machine tool?"

"No, where did you get this ultra-high-precision machine?"

"Wait, this won't be bought from Wang Yang's live broadcast room! I remember when I watched the live broadcast last night, the military bought two units, good guys, it can't be these two, right? ”

"Like...... It's really possible. ”

"That's not right, isn't Wang Yang's live broadcast room selling models? If it is a model, it must be obvious at a glance with Zhou Lao's qualifications. ”

"What's the matter, is this really a real ultra-high-precision machine tool? Impossible. ”

As the crowd became louder and louder, Zhou Ran also stood in the front position of the ultra-high-precision machine tool.

He has not yet found the console of this ultra-high-precision machine, which is where the main engine is located.

Each ultra-high-precision machine tool needs to be controlled by the main machine, that is, the main control platform, because only in this way can it be guaranteed to meet the requirements and cut out the perfect angle.

But he didn't see the appearance of a master control platform on this ultra-high-precision machine.

Obviously, when I saw the genuine high-end machine tools of Yamazaki Mazak Company at the exhibition, the main control platform was placed outside the equipment.

Could it be that this is really a model that is just a replica of the appearance, but it is useless at all?

While thinking about it, his eyes noticed that on the surface of the ultra-high-precision machine, there was an area where there was nothing left, and there seemed to be a linkage device on the surface.

Zhou Ran was stunned for a moment, and hurriedly stepped forward to open this linkage device, but he couldn't do it.

As he was thinking, out of the corner of his eye, he saw a page of paper, which was being sandwiched between the cracks in the shell structure.

He curiously pulled out the piece of paper, and when he saw the words "Instruction Manual for this Ultra-High Precision Machine Tool" written on the top of the paper, his expression was stunned.

Instruction manual?

There's an instruction manual for this thing?

It's also strange and intimate.

Zhou Ranzi carefully read the entire instruction manual in detail.

Then, he raised his head, looked at the linkage device in front of him, and tentatively entered a password on the nine-square grid digital button next to the precision CNC display.

Click.

Then, with a sound, the linkage was opened, revealing a screen inside, plus a simple control platform.

Zhou Ran looked at it, and his pupils shrank suddenly.

That's right, this is the main control platform of the ultra-high-precision machine tool he saw at the exhibition before, exactly the same, exactly the same!

"Is this really a real ultra-high-precision machine? This, this is really incredible, no, this can only prove that this ultra-high-precision machine tool is indeed realistic, and even completely according to the original appearance of the one-to-one replica, but before starting, before trying, it cannot be proved that this is true. ”

Zhou Ran muttered to himself, the excitement on his face could no longer be suppressed, and his heart was beating wildly, as if he was about to jump out of his heart.

Now it can be basically confirmed that this ultra-high-precision machine tool is very meaningful to buy, even if it is a hundred million, it is worth it, just dismantling this ultra-high-precision machine tool, according to the layout of this, as well as the corresponding distribution of technical points, etc., can be applied to domestic high-end machine tools.

Thinking like this, he walked quickly in the direction of Li Wenshan and the others.

"Old Zhou, what's the situation? Do you think this is true, or is it fake? He Wei asked in a low voice.

Li Wenshan was equally curious.

Although he knew that Wang Yang might not lie to him, this may be a real ultra-high-precision machine tool, but Yamazaki Mazak Company has come out to deny it, Wang Yang can still get a real ultra-high-precision machine tool?

Not really.

However, Wang Yang had gotten a real F22 fighter before.

And this ultra-high-precision machine tool doesn't seem to be a very important thing......

At this time, I heard Zhou Ran say solemnly: "It's still uncertain, quickly, put this ultra-high-precision machine tool in the workshop, and I want to conduct a test." ”

As soon as they heard this, He Wei and Li Wenshan reacted at the same time, and their hearts were suddenly shocked.

Since Zhou Lao said this, it means that Zhou Lao just looks at the appearance, just looks at these distributions, etc., has been basically determined, this should be a real ultra-high-precision machine tool.

However, because before starting and testing, even Zhou Lao could not determine whether this was true with the naked eye, so he needed to put the ultra-high-precision machine tool in the workshop.

"What are you doing in a daze, hurry up!" Zhou Ran shouted.

Li Wenshan nodded hurriedly: "Hey, I'll arrange for someone to move immediately, Old Zhou, you go and prepare first." ”

"Okay, as soon as possible, but be careful, don't break it!"

"Don't worry, Old Zhou."

……

R&D center, machining experimental workshop.

In front of the huge ultra-high-precision machine tool, Li Wenshan, Zhou Ran, and He Wei stood here, all of them changed into work clothes and wore masks.

After all, in this workshop, the temperature and humidity are constant, which is to test the limit value of the accuracy of high-end machine tools under this stable temperature and humidity.

Zhou Ran, who was holding a piece of raw material in his hand, stepped forward with some trepidation.

To be honest, although he was looking forward to starting this ultra-high-precision machine, he couldn't help but be a little nervous when it came to this point.

You know, he has now basically determined that this ultra-high-precision machine tool is likely to be a real one.

But if he found out later that it was a fake ultra-high-precision machine, he would have been disappointed.

Kyushu's high-end machine tool industry really needs an ultra-high-precision machine tool, but because of this, Zhou Ran also had to start.

"The power is all connected, Zhou Lao, it's ready to start." He Wei reminded on the side.

Hear the words.

Zhou Ran took a deep breath, and then pressed the start button located on the CNC display.

Drops –

At the moment when he pressed it, the ultra-high-precision machine made a crisp prompt sound, the precision CNC display glowed, and a logo appeared on it, which was a logo that completely imitated the logo of Yamazaki Mazak.

Click.

The linkage device was also opened, and the main control platform was slowly pushed out and presented in front of Zhou Ran.

Is it able to start...... Not only can it be started, but even the main control platform, as well as the precision CNC display are absolutely easy to use, and he even saw the state of some parts in the operation of the ultra-high-precision machine tool.

It's true, it seems to be true!

This ultra-high-precision machine not only looks like it, but also starts, and it seems that there is no problem even if it is operated.

This is enough to prove that this may be true, the latest ultra-high-precision machine produced by Yamazaki Mazak!

"Old Zhou, this, this is really ......" He Wei opened his mouth wide, the pupils in his eyes fluttered, and the expression on his face was full of consternation, but with excitement and excitement.

The moment he saw this ultra-high-precision machine start, he thought that this could be a real ultra-high-precision machine, after all, if it can't be started, it must be a fake.

And if this is really the most advanced and top-of-the-line ultra-high-precision machine tool in the world, it will be an extremely important thing for the current Kyushu.

Li Wenshan narrowed his eyes: "Chief He, it seems that this should be a real ultra-high-precision machine tool!" ”

He can now be ninety percent sure that this is the latest ultra-high-precision machine tool produced by Yamazaki Mazak Company that Wang Yang obtained through his channel.

Just like his conjecture, Wang Yang, who can get a real F22 fighter, doesn't seem to be difficult to get this ultra-high-precision machine tool.

Zhou Ran turned his head: "You are right, this should be a real ultra-high-precision machine tool, but I still need to test the specific accuracy." ”

Li Wenshan and He Wei were shocked at the same time.

They all heard the solemnity in Zhou Lao's tone, as well as the extremely suppressed excitement and excitement, and it could also be seen that Zhou Lao was also trying his best to restrain himself and not let himself be too excited.

so as to avoid miscalculations and other situations.

But now it's just a matter of using a piece of raw material to test the best accuracy that this ultra-high-precision machine can achieve.

Success or failure is all about it!

Thinking of this, Zhou Ran no longer hesitated, picked up the raw materials in his hand, put them into the discharge port of the ultra-high-precision machine tool, and began to operate the main control platform in front of him, as well as the precision CNC display.

At this time, Li Wenshan and He Wei also stared intently at everything Zhou Ran operated.

……

Half an hour later.

Zhou Ran wore thick dust-proof gloves and carefully took out the raw materials cut by the machine tool from the position of the discharge port and put them on the professional measurement level accuracy instrument.

A scientist immediately measured it with the current accuracy.

Suddenly, the expressions of the other three were full of anticipation, and they all looked at the level accuracy meter intently.

"Professor Zhou, the current size of this piece of raw material is 56.789 microns, and the size set by the machine tool is 56.788 microns, and the error of this ultra-high-precision machine tool is 0.001 microns, which has reached the highest accuracy value announced by Yamazaki Mazak!" The scientific researchers' tones were trembling, and they looked at Zhou Ran at a loss.

Zhou Ran was stunned for two seconds, swallowed his saliva, and muttered to himself, "Really...... This is truly an ultra-high precision machine! It's really an ultra-high-precision machine tool produced by Yamazaki Mazak! It's true, it's certain, it's true! ”

Zhou Ran laughed heartily, and the excitement and excitement that had been suppressed before were all released at this moment, which also made him feel an unprecedented feeling of pleasure.

"Really? Old Zhou, you're really sure it's true, right? Are you sure? Hahaha, Chief Li, it's true, it's true! After a short period of stunned, He Wei exclaimed, and the whole person fell into a state of madness.

As long as you can be sure that the ultra-high-precision machine in front of you is real, that is the most gratifying thing at the moment.

After all, what Kyushu needs most now is ultra-high-precision machine tools.

Moreover, what excites He Wei the most is that when he originally bought these two ultra-high-precision machine tools in Wang Yang's live broadcast room, it was purely to gamble and see if it was true.

What he didn't expect was that this was indeed true, not even true, this was still an ultra-high-precision machine tool that looked at the whole world and reached the pinnacle of accuracy!

This transaction is simply profitable!

(End of chapter)