Under the furnace of flames, Duan Lie calmed down the excitement in his heart and sat on the ground and began to meditate.

Although he is full of confidence in repairing the Dragon Slayer Sword, the process still requires subtle control, a full mental state and a calm thinking heart are essential, and at the same time, he must recall and familiarize himself with the information about the Dragon Slayer Sword that he has studied before as soon as possible, and prepare for the repair.

Putting Jace in charge of guarding the elemental life near the Flame Furnace, Duan Lie quickly calmed down and recalled the information in his mind.

He is very intelligent and generally retains a long memory of the materials and knowledge he has read, and it has been proven that long-term hard study and memorization can improve the brain's memory ability.

It can be said that Duan Lie's memory ability is super strong, and through his half-hour-long memories, he completely and clearly sorted out all the information about the Dragon Slaying Sword.

After he had recalled the Dragon Slayer Sword three times, he took the half-broken Sword of Glory out of the Ethereal Spirit Ring and placed it with the Spirit Turning God Seal.

The material of the Soul Turning Divine Seal is Gangwen Stone, which is a god-level emblem created by the second use later, and it is a part of the original Dragon Slaying Sword, and from the perspective of texture fusion, it will be easy to merge with the Dragon Slayer Sword after being melted.

However, because the Dragon Slayer Sword had been broken, the Void Split Inscription did not exist, and there were some differences in the means by which weapons and armor were forged to give inscriptions.

The inscription on the armor can be completed step by step by means of the arrangement of the inscription emblem and the sewing and fitting technology after the successful forging of the armor, which is relatively simple and easy, and it is not easy to cause losses.

It is more difficult to do this when the weapon must melt the material and exist in the mold in liquid form.

Therefore, it is more valuable to study a master blacksmith and let him forge a high-quality weapon than to forge an armor.

Now Duan Lie still lacks a mold.

The mold is the basis for the formation of the Dragon Slaying Sword, and the texture of the mold that is generally needed may be better than the Dragon Slaying Sword, which Duan Lie lacks now, but fortunately, when Fa Du Li Ye left, he didn't take all his tools away, and some hard stones made of centrifugal ore were left.

These centrifugal ores are a special variety of the Battle Spirit Continent, specially used for forging weapons, Duan Lie took a rectangular centrifugal stone more than a meter long and moved it to the front, took out the diamond carving knife and began to carve it.

Every great master who forges weapons is a painter and sculptor full of charm, they will first have a rough shape of the weapon that needs to be forged in mind, and then use the ingenious fusion of thinking and skills, with the help of engraving technology in the perfect presentation in the mold, so that the material is thrown into the forge furnace to melt, and then the resulting liquid metal is introduced into the mold, and then cooled, the shape of the weapon comes out.

Then there is the final process of tempering and beating, through fine processing, so that the shape of the weapon and equipment is more perfect. And this is precisely the process of studying the strength of the forger.

Therefore, the forging process is as full of vitality as the blending of potions and the engraving of inscriptions, and it is difficult to reach extremely high realms without unique talents, and it is impossible to complete the pinnacle of treasures.

As an artifact, the Dragon Slayer Sword has a historical icon, and it is also the most important weapon for this dragon slaying, and it cannot be sloppy.

Therefore, at the beginning, Duan Lie meditated for a long time, and only then did he slowly walk towards the Flame Furnace until he had completely entered the forging state.

The four-meter-high forge had as many as one hundred and twenty-two vents, which could control the flame concentration of the flame furnace, and suffocating flames poured out from a window-like console in front of it.

When everything was ready, Duan Lie put the broken artifact, the half-cut Dragon Slaying Sword and the Spirit Turning Divine Seal on the operating table, and pushed it inside, and then ran to the operating table to open all the one hundred and twenty-two vents.

Affected by the passing wind, the temperature inside rose sharply, and for a while, the flame furnace plane was affected by the activation of the forge furnace, and a steaming fire cloud was condensed above the forge furnace. The blazing temperature, once turned into ethereal vapor, condensed in the sky, and the flame elemental soared to the maximum limit.

Standing under the Flame Furnace, Duan Lie suddenly sweated like rain, the highest temperature that the Flame Furnace could condense was completely beyond his imagination, it was simply a temperature that was enough to roast people to death, no wonder at the beginning, Fa Du Li Ye had reached the sixth level of the War Emperor to create the Flame Furnace, and it seemed that it was still far from Fa Du Li Ye's strength.

Luckily, he had found the Extreme Cold Elixir, and now he was able to get some of them while melting both artifacts, so that he could use them later.

He carried the bucket and quickly escaped, and then used a huge spoon to scoop out the extremely deep cold spoonful by spoon and pour it into the bucket, as a result, the surface of the bucket instantly froze, fortunately, the bucket was made of demonic iron ore, although it was frozen, but the extremely deep cold was not automatically solidified, Duan Lie scooped most of the bucket with his feet, and then walked back step by step. He put the bucket on the ground and said he wouldn't leave.

The cold air emitted by the extreme deep cold could help him resist the boiling temperature next to the flame furnace, Duan Lie was not far from the operating table, carefully observing the progress of material smelting through the window, and for more than an hour, two liquid metals made of Gangwen stone finally flowed down the conduit, flowing into the magic iron bucket like a mass of paste.

The magic iron bucket does not melt easily, it is the best forging vessel, and the fiery red liquid gang-patterned stone gurgles gurgling out, and soon flows down the groove into the mold that has just been carved.

Duan Lie's carving level is absolutely first-class, he did not follow the forging concept of Fadu Liye, but carved a huge wide sword mold according to his own ideas, this mold is shaped in a different way, the position of the handle is carved with extraordinary carving technology A hideous dragon head is located at the tail end of the handle, the dragon body stretches straight to the position of the sword pool, carving a delicate iron lock style to tightly entangle the dragon body, implying the meaning of the evil dragon, and then the dragon body continues to stretch from the sword pool, to the tip of the sword, until the end of the dragon.

The whole mold is shaped like a dragon, but it is not a dragon of the West, even if it is taken out, not many people know that this is the shape of the oriental dragon in his memory, the sword pool rises left and right, it is a flamboyant and sharp dragon claw, which is particularly smart and natural, lifelike.

There were many potholes under the groove of the mold, like dragon scales on the dragon's body, and when the fiery liquid Gangwen stone flowed into the groove, Duan Lie immediately became excited.

The difficulty of shaping the mold is not high, but at this time, it needs to use the ability of the Great Master of Huiyin.

The first thing Duan Lie thought about was the Split Void Inscription, this inscription technique was not complicated, but it belonged to the powerful Void Inscription Technique. It has extremely powerful power.

The so-called void inscription technique is not to leave inscription textures on any solid form of materials, such as fog, gas, liquid and other materials, this technique is difficult to master, but since Duan Lie has seen Fa Du Liye's forging diary, he has practiced it thousands of times, not to mention that he is also familiar with it.

What he needed to do was to leave this great inscription symbol while the liquid stone was flowing through the grooves of the mold at the last minute, and then he could proceed to the next step of the quenching process.

When the last drop of liquid Gangwen Stone was full, Duan Lie finally raised the diamond carving knife and carved as many as dozens of inscription textures at the speed of electric flint, these textures spread all over the entire sword body, but they were all done in one go, without the slightest delay, even Duan Lie couldn't believe that he could succeed at one time.

In just three seconds, after watching the inscription texture representing the Void Technology completed, Duan Lie quickly pulled the mold out of the Flame Furnace, then closed the lid, quickly picked up the spoon and scooped out a spoonful of extreme deep cold, and sprinkled it fiercely.

"Wow ......"

A stream of white vapor steam up, and the two extreme temperatures of cold and hot quickly steamed up a large white mist, Duan Lie didn't even drag it at all, opened the mold lid and reached out to pull a black dragon-shaped broadsword out of the mold, and then laid it flat on the anvil without thinking.

At this time, the dragon slaying sword had not been completely repaired, but showed a red hue, and it was at this time that Duan Lie picked up the hammer next to the anvil and smashed it down one after another.

The refining of the artifact must make the appearance almost impeccable, this is also the most critical step that Duan Lie needs to do, he moved the anvil to the position of the window, while repeatedly beating, the texture of the Gangwen stone is hard, but once it cools, it is difficult to change the form, Duan Lie must also return the dragon slayer sword to the furnace to red, so that the texture reaches a delicate balance between softness and firmness, and then again and again, again and again to perform the boring actions under his hands.

Of course, these actions seem boring, but for a forging grandmaster, they are full of mystery and excitement.

At this time, Duan Lie was already sweating like rain, even if it was a fighting spirit, it was like an overdraft, there was no way, the difficult speed of refining the artifact was not at all overwhelmed by the battle with a master of the same level for three days and three nights, Duan Lie's current strength was still very weak, but he was desperate to fully exert the only fighting energy in his body, and for a while, the clanging sound in the flame furnace plane was endless.

The clear sound was like a century-old hymn to the imminent release of a new artifact.

About two hours later, Duan Lie's throat suddenly let out a thunderous cry, and he immediately plunged the dragon-slaying sword deep into the magic iron bucket containing the extreme deep cold.

And then......

"Wow ......"

The colorful light suddenly painted the blazing sky with an extremely dazzling brilliance.

"It's done. ”