Kong Ming lifted an oil drum on the ground, poured a bucket of fire oil into the stove, and then flicked his fingers, and with a trace of fire system Yuan Force splashed out, the fire oil suddenly burst into flames, making the temperature in the stone cave increase a lot.

The essence of the way of forcination lies in controlling the fire system element force to decompose, temper, fuse, and shape the materials in the fire pool, but in order to achieve a better effect, it is best to have open flames outside the fire pool.

The best auxiliary fire is of course the fire of the center of the earth, but not everyone has the ability to draw the fire of the center of the earth for their own use, and for those entry-level forgers, it is still the easiest to use fire oil.

Under the light of the fire, Kong Ming looked at the materials piled up next to the fire pool.

Ten pieces of fist-sized stainless steel, produced in the iron and wood side of Shazhou in the West, a batch of arrows and bamboos over a hundred years old, and a batch of furs of first-order demonic beasts and wind wolves!

Of the four materials, except for ironwood, which is relatively rare, the rest of the materials are common items in the cultivation world, and their value is not particularly high.

Kong Ming prepared these four materials, which were naturally used for forcination. However, for beginner forensers, when they first try, they generally choose two materials for forging, so that the possibility of success will be greater. Only after accumulating a certain amount of experience, and then appropriately adding materials, is it a normal cultivation method for the way of refining.

Kong Ming is now using four materials at once, isn't it a bit of a hurry to achieve quick success?

But in fact, Kong Ming has his own reasons for doing this!

Kong Ming and Huang Yueying in the Three Kingdoms period were all experts in the production of organs, whether it was a pumping truck used in agriculture, or a wooden ox and flowing horse used in war, a Yuan Rong crossbow, etc., it can be said that they are very ingenious!

In particular, the Yuanrong crossbow is definitely the number one killer weapon in the era of cold weapons!

It is a pity that the metallurgical technology of the Three Kingdoms era is not high, and the components of the Yuanrong crossbow are very precise, often to create hundreds of sets of parts, and only one or two sets can be successfully assembled. In addition, the iron quality at that time was impure, and the power of the spring of the Yuanrong crossbow was strong, and the damage rate was extremely high after using it for a period of time.

It is precisely because of such technical conditions that the Yuanrong crossbow cannot be installed in the Shu army, and can only exist as an elite army for assault.

However, the Tian Yuan Continent has a method of forging, and in the face of the powerful effect of Yuan Force, refining the Yuan Rong Crossbow with the method of forcination can definitely increase the power of this long-range weapon to the limit!

Since Kong Ming wanted to achieve something in the way of forensing, he naturally thought of letting the Yuan Rong crossbow regain its brilliance on the Tianyuan Continent when he forged it for the first time!

Doing so is very commemorative for Kong Ming.

Ironwood is a specialty of Shazhou, which only grows in the endless desert, and the wood contains very little water, and its hardness is even better than steel, making it the best wood material for forging. As for the steel, it is the steel mother purified through more than ten processes, which is an indispensable metal material used in calcining. And the fur of the hundred-year-old arrow bamboo and the wind wolf are both materials that can withstand the infusion of Yuan Li, and they can naturally be used in the way of forcination.

The crossbow body is made of ironwood and stainless steel, and the crossbow arrows are forged from the fur of the hundred-year-old arrow bamboo and the wind wolf, so the forged Yuanrong crossbow is definitely of the top quality, even if it does not reach the level of the Yuan soldier's spiritual weapon, it is extremely powerful among ordinary Yuan soldiers!

Obviously, Kong Ming's first forging is a challenge to high difficulty!

With a flick of the sleeves of Kong Ming's robe, the top cover of the fire pool bounced off the top of the fire pool, and then Kong Ming threw the four materials into the fire pool one by one. After the top lid was closed, the fire system Yuan Force was injected into the fire pool!

The structure of the fire pool is unique, after the fire system element force is injected, it is like it can run along the meridians of the human body, evenly distributed inside the fire pool, and then four yuan force flames are formed, wrapped in the calcining materials and slowly refined. ...,

Refining four materials at the same time naturally consumes as much yuan power as refining two materials. In addition, refining materials cannot be completed in a short period of time, and the Yuan Power in the body of ordinary high-level Yuan Shi realm cultivators cannot support refining four materials at the same time.

However, Kong Ming possessed the body of the fire spirit, and even if the Yuan Power in his body was not necessarily stronger than that of other high-level Yuan Scholars, he was much better in terms of the efficiency of using Yuan Force, which also made it possible for him to refine four materials at the same time.

Moreover, Kong Ming's soul power is strong, and it is not a problem to be distracted, so the four materials gradually changed under the calcination of the fire system Yuan Force.

Both ironwood and steel slowly begin to liquefy, eventually turning into a mass of wood juice and a mass of steel juice. As for the hundred-year-old arrow bamboo, under the scorching of the Yuan Force flame, all the impurities were refined, and the fur of the wind wolf was also slowly decomposed, forming clusters of arrow feathers.

In fact, the four materials that Kong Ming refined were set in pairs, one was a crossbow body, and the other was a crossbow arrow! In the eyes of ordinary forgers, it was equivalent to refining two Yuan soldiers at the same time!

The first refining of the furnace challenged such a high difficulty, and Kong Ming could be regarded as unprecedented in the Tian Yuan Continent!

Kong Ming carefully experienced the changes in the Yuan Force in the Fire Pool, although he lacked experience, but with the body of the Fire Spirit and the powerful soul power, he was able to clearly grasp every change in the Yuan Force. It can be said that Kong Ming did not make the slightest mistake in the refining process!

Unconsciously, half an hour passed, Kong Mingmeng's eyes widened, and a fine light shot out of his eyes.

At this time, the four materials in the fire pool have been thoroughly refined by Kong Ming, and the next thing to do is the most critical step of forging: fusion!

If you can't fuse materials with different properties together, it means that you have failed!

Kong Ming carefully manipulated the four Yuan Force flames, moving the refined materials from the forcible area of the fire pool to the forming area.

The internal structure of the fire pool is complex, and different areas have different functions, among which the design of the forming area is the most exquisite.

The forming area is made up of a special material called soft gold, which can change shape freely according to the mind of the forge, thus forming a variety of molds. As long as the material fusion is successful, it can also be molded through the mold.

Although the structure of the Yuanrong crossbow is precise, Kong Ming follows the method of forcination, as long as the mind moves, the mold can be formed, so the most difficult step is the fusion!

The crossbow arrow is good to say, as long as the mold is completed, and the arrow feathers refined from the fur of the wind wolf are rooted in the arrow bamboo, it is considered to be successfully forged. The only difficulty is that forging multiple crossbow arrows at the same time requires distraction, and the requirements for soul power are very high.

But Kong Ming's soul has the experience of traveling through the universe, and his soul power is so strong that he doesn't think twice in the world, and refining crossbow arrows can't stop him at all!

Now, it's up to Kong Ming to successfully fuse ironwood and steel to forge the crossbow body of the Yuan Rong crossbow!

PS: Brothers and sisters, I look forward to your clicks, recommendations, and collection support during the new book period!