Lin Chao ignored it and stood silently beside them.

In addition to him, there were four applicants, three apprentices, and one master.

The burly man is the workshop mechanic forest master, and he is the mechanic squad leader.

At present, the team members have left and are worried about manpower.

Before the arrival of the personnel manager and Lin Chao, he was working on a small stamping machine with the man who had applied for the job of a mechanic.

Raubin looked at the personnel manager.

"Sister Hong, this one also knows how to repair machines?"

The look on his face when he spoke was completely disbelieving, he had seen more mechanics than the personnel manager, and he didn't have such a state.

He gestured to a few machines next to him.

"Those are all bad, you can pick a table and try it. ”

"Then try it. ”

Lin Lan came to a similar machine, and listened to the two people next to him say "oil", "compressed air" and "clutch", he didn't understand it at all.

He tried to reach out and touch it, but found it dirty, so he asked if he had gloves.

This made the other people's expressions change, and the corners of the personnel manager's mouth curled, and she guessed that there would be such a play.

In her opinion, if Lin Chao was full of oil, it must be a fun thing, who asked him to wear a suit and leather shoes to apply for a mechanic.

Laubin took the heavy toolbox.

There was a pair of dirty labor protection gloves inside, as well as protective gloves against cuts, and the appearance was also stained with oil.

The three apprentice applicants looked at Lin Chao curiously, the other party was about the same age as them.

If I hadn't heard it from the HR manager, I would have thought it was someone from the office.

Master Lin saw that Lin Chao didn't touch the two gloves, and said in a thick southern accent: "Mechanics are like this, you can get a pair of gloves every week, and if you are dirty, what kind of mechanic should you do." ”

Even if there is a shortage of people, he doesn't need a pampered person like Lin Lan.

Raubin exchanged glances with the personnel manager, smiling knowingly.

"Try it, it's good to like cleanliness. Such a character will definitely be able to do a good job in the maintenance of the machine. ”

said so, but the way they looked at Lin Chao was like watching a play.

Lin Ran ignored the opinions or thoughts of the others, and he looked at the press from front to back, left and right.

I took out my handkerchief, touched the machine a few times, and asked, "Does it work?"

"What?"

A few people laughed, especially Raubin, who laughed loudly.

"Do you still need to fix it if it works?

"Oh, it doesn't work at all. I'd like to see if there's any activity available. ”

Lin Chao said calmly.

"Could it be that Mr. Lin is the first time to come into contact with this kind of machine?"

The personnel manager asked knowingly.

Lin Chao readily admitted that he had no idea how this kind of press worked.

Laubin pointed to the master who had come to apply.

"I don't think he can even turn it on, so Master Liu went to help open it. ”

A man in his thirties moves as he speaks.

"First the power and air supply, starting the main motor, then the lubrication, these are all automatic lubrication. The light is on, now in the self-test, here is the alarm light, if it is on, it will be removed. Note this, it's a ratio control...... Let's try to operate the single and continuous motion modes, here is the photoelectric protection, this is the emergency stop button......"

Lin Chao listened humbly and quickly wrote it down.

Master Liu moved slowly, spoke very carefully, and showed off the ingredients.

Finally, it is demonstrated to hit the slider to the top dead center and bottom dead center respectively, indicating that it has been adjusted to the inch mode and everything is normal.

"I roughly understand, thank you. I'll look into it. ”

Lin Lan nodded, this is the stamping machine.

It seems to be very versatile, and it can be used to process iron into various complex shapes.

In fact, it is a stamping machine, but it is much more advanced than this.

He followed Master Liu's steps with great interest and pressed the button, but the machine did not respond.

"Your arm is back, this is the danger zone, and the light point protection device is working. ”

Master Liu shook his head, believing that Lin Ran was a genuine novice who had come into contact with this kind of machine for the first time.

This time, even the apprentice candidates laughed.

Lin Ran adjusted his body and slowly pressed the operation button.

The tightly fitting upper and lower modules are separated, very slowly, press and move a little.

He smiled, recalling that when he was a child, he watched Zhuang Yueming operate various machines.

Craft bizarre mechanical equipment such as time machines, doomsday detectors.

Lin Ran gradually raised the upper module to the top, and then went to the back of the press to see where the parts were.

He took out his mobile phone again and searched for the working principle of the press, which turned out to convert circular motion into linear motion.

Not only that, but there are also sliders on both sides that work together to shape the material.

Laubin watched it for a while and found it boring.

Just like a rhetorical young man who doesn't know the so-called, continue to watch Master Liu's test.

Only three onlookers of apprenticeship candidates and the personnel manager still looked at Lin Chao, who were like monkeys in a zoo, and they found it very novel.

Lin pondered and returned to the faulty press.

He didn't know what was wrong, so he took a closer look at the difference between this machine and the one just now.

Similar in appearance, he kept going back and forth between the two machines, trying to make the malfunction of the machine abnormal.

Master Lin made no secret of his attitude.

"I've been in the industry for many years, and it's the first time I've seen a machine repair like this, and it's a joke. ”

The HR manager also messaged on his phone that there was a hilarious candidate.

Wearing a suit in front of a machine and not knowing what to do, it's like doing scientific research.

Everyone else is a tooling with a toolbox.

In the butt pocket are pliers, a few screwdrivers in the pocket, and tools such as flashlights.

This old man didn't use anything, for fear of getting his hands dirty, so he touched it carefully.

Where is the repair of the machine, it is simply to look at the artwork.

Master Liu finally figured it out, looked at Lin Chao who was observing from the back of the machine, and deliberately raised his voice.

"The connecting rod screw ball head ball head is in poor contact with the slider ball pad gland, and the gland screw is loose. Just scrape the ball head, ball pad, and then tighten the gland screw. ”

As he spoke, he started to operate, and his hands were covered in oil.

"The oil is not cleaned, and the workers are lazy. ”

Master Lin nodded, and Lao Bin also smiled with satisfaction, and couldn't help but turn his head.

"We have limited time, you just turn like this, when will you figure it out?"

Lin Ranzheng was poking around the press with a short iron rod wrapped in a handkerchief.

"I'm holding on. ”

Master Liu over there has figured out the problem and solved it smoothly.

In this way, everyone came over to look at Lin Chao, he was still stabbing, and the personnel manager was already bending over with a smile.

After a few minutes, Lin Chao calmly turned back from behind the press.

"I don't know them at all, so there's no way to point out the problem. ”

The people were not surprised, and the personnel manager said, "Mr. Lin is not mistaken, you are applying for a mechanic." ”

"I know. I think it's been fixed. ”

Lin Ran put the iron rod back in its place, but there was no trash can anywhere.

He took out a handkerchief again, wrapped the dirty ones, and then looked at them lightly.

"I'm not a teacher, so I really can't speak. Repair, it's no problem. ”