Chapter 2598: Casting Furnace Molding

However, softening is only the beginning, and even if the non-fusing stone is metallized, its degree of fire resistance is still terrifying.

Under Ye Li's control, the earth fire perfectly wrapped the metallized non-fused stone, and the blazing heat burned its surface more and more red.

Half an hour later, the non-fusing stone finally showed signs of melting, and a little bit of metal solution dripped from the surface of the non-fusing stone.

Ye Li felt that the metallized non-fused stone did not show the slightest sign of reversal, that is to say, the effect of the gold liquid was still very long, and the non-fused stone would not be petrified in a short time.

Ye Li felt the change of the non-fusing stone, and finally breathed a sigh of relief in his heart, as long as the non-fusing stone could melt, then everything was easy to say.

It took a full hour for the huge unfused stone to finally melt into a mass of crimson sap.

Ye Li casually threw the double horns of the Great Red Flame Jiao into the flames, and then threw all kinds of auxiliary materials, as well as Fengxing, Muxing, and Yangxing materials into the fire in turn.

The flame licked all kinds of materials, and the temperature of the rich and pure earth fire was extremely high, and ordinary materials could not resist the power of the flames at all, and it only took a quarter of an hour to melt all the materials into juice.

After the melting, it is the process of fusing various materials, which requires the power of the spirit rune's divine sense to be strong enough and the control ability to be fine enough.

Only in this way can the various materials be perfectly separated and evenly blended together.

Let the patterns of all materials blend together, and the characteristics of each other are perfectly combined.

If the fusion is uneven and the material is unevenly distributed, the varying hardness of the surface of the cast furnace alone is enough to cause the entire furnace to shatter when cooling.

Moreover, the uneven material is also difficult to guide the formation of the rune formation, basically thinking that the casting is a failure.

As a master-level caster, Ye Li naturally understood this very well, so his energy at this time was completely focused on the earth fire in front of him, controlling the material juice to rotate rapidly in the flames.

The high-speed rotation of the juice causes all the juice to dissolve into a whirlpool and finally blend together.

Each material is slowly combining with the others, wrapping and intertwining with each other.

In the end, a cloud of crimson liquid with pure and uniform color appeared in front of Ye Li.

A slight smile rose at the corner of Ye Li's mouth, he knew very well that all the materials had been perfectly blended together.

Now is the time for shaping, and the shape of a casting furnace in the leaf centrifugation soon appeared, which is a kind of casting furnace in the shape of a square tripod, the furnace is boxy and supported by four legs, and at first glance it is a square tripod.

Fang Ding's shape is very simple, which can also save Ye Li a lot of time, after all, if Ye Li wants to shape a unique casting furnace, it will definitely consume a large part of his time.

Ye Li knew very well that the effect time of the gold liquid could not be too long, if he couldn't complete the casting furnace within a few hours, once the gold casting liquid failed, the casting furnace would be immediately finalized, and then he would not be able to change the direction of the pattern in the hardened Fang Ding, and the casting furnace would be completely scrapped.

Among these materials, it is easy to say, the unfused stone is really difficult to find, if he loses this unfused stone, Ye Li really doesn't know where to find another piece of such a big one.

After the rapid shaping, Ye Li immediately cheered up and began to speed up the formation of the action guide pattern.

In this forge furnace, the power of fire is not the most important, because the main flame used in the furnace is earth fire, and the flame produced by itself is used when there is no earth fire.

The purpose of Ye Li's use of the double horns of the Great Red Flame Jiao is because the double horns of the Great Red Flame Jiao have the property of gathering fire, and they have a strong effect on gathering ground fire.

After the fire gathering formation and the fire formation were first guided, Ye Li opened the Eye of the Origin again, and the formations of several other attributes were all auxiliary effects, so they needed to be combined with the Fire Formation of Fire Xing.

The more auxiliary formations connected around the main body, the more complex it will be.

For ordinary casters, at most one attribute auxiliary formation is connected around the main rune formation, but Ye Li plans to connect three auxiliary formations on the main body's rune formation.

The auxiliary formations of Fengxing, Wood Xing, and Yang Xing are all designed to bring the power of fire to the end, and Ye Li relies on the effect of the Eye of the Origin to draw these three formations to the most perfect state.

Of course, in fact, with his current level of forge, even without the help of the Eye of the Beginning, he was able to draw the formation to perfection.

It's just that because Ye Li attaches great importance to the Heaven Destroying Bow and is unwilling to make any mistakes in the casting furnace, he will activate the Eye of the Origin and make all the preparations as perfect as possible.

With the help of the Eye of the Beginning, the pattern of the furnace was guided to be drawn at a very fast pace.

The extremely complicated and huge rune formation gradually took shape in the square ding.

Every rune line appeared in the most perfect place, and Ye Li's ability combined with the special effect of the Eye of the Origin allowed him to exert the power of the caster to the extreme.

It took almost two hours for the rune formation to finally be completed.

At this time, Fang Ding also began to show signs of petrification again, the effect of the gold liquid was gradually disappearing, and the non-melting stone would become its original appearance again.

Although the non-fusing stone has been mixed with other materials at this time, it still plays the most important role as the main body.

The gradual petrification of the non-melt stone made Fang Ding's temperature automatically lower.

The crimson on Fang Ding began to slowly fade, as if it was gradually cooling.

At this time, Ye Li did not extinguish the flames like the last step of the ordinary casting process, but instead frantically urged the power of the earth fire in the formation, calcining Fang Ding, which was gradually becoming dull in front of him.

An unmelted stone is indeed an unmelted stone, and even such a fierce earth fire could not shake Fang Ding in the slightest.

The burning of the flames did not make the slightest change on the surface of Fang Ding, and the gray-black casting furnace did not move in the flames, and the flames really looked very weak in front of the non-melting stone.

Ye Centrifugal was very satisfied with this, because he knew that when the power of the flames in the forges was fully exerted, the temperature would be even higher than the previous ground fire.

At such a high temperature, the general casting furnace will definitely not be able to withstand the calcination for a long time, and the rune formation in the furnace will lose its effectiveness due to the gradual deformation of the furnace body, and the casting will stop because of this.

Now with the casting furnace of non-melt stone casting, no matter how high the temperature of the flame is, the furnace will not be destroyed because of it, and the casting process of the Sky Destroying Bow will not have any problems no matter how long it lasts.