I don't know what material this black roar casting hammer is made of, it can withstand such a high temperature, and it also has to withstand the strong impact with the metal during forging, Yin Teng's heart is shocked inexplicably, and his eyes flicker again and again. Pen × fun × Pavilion www. ｂｉｑｕｇｅ。 ｉｎｆｏ

"Sure enough, it is worthy of being the third casting hammer in the Demon Clan's 'Thousands of Tempers' list!"

The formation of the blood-colored yarn is covered on the casting hammer, and the metal can be indirectly calcined through the violent contact between the hammer and the metal, so that the alloy is always maintained in a high temperature state, and the alloy will not be cooled and dull as just now. It can be maintained until the forging is successful! This makes the forging of Yinteng like a tiger with wings! Full of confidence.

"Ding, Ding, Ding!Ding!" "Luck all over the body, hands up and down, hammer after hammer, sparks splash!

As Yin Teng's movements became faster and faster, the black roar casting hammer was forged on the alloy like a storm, sending out bursts of sound waves like a demon god, and the alloy continued to hit with the casting hammer, coupled with the indirect calcination of the blood-colored light on it, under the heavy hammer that Yin Teng had just achieved the third layer of the Blood Casting Realm, plus the catalytic effect of Zhu Rongshi.

At this moment, the whole seems to have reached a delicate state, and the alloy is constantly being forged by the casting hammer to become more deformed, and at the same time more impurities are smashed out, making the metal texture more fine and pure.

As the forging continued, the whole alloy finally shrunk again under dozens of hammers, and now it looked the size of a pigeon's egg!

"Insight into God's Eyes!

Yin Teng did not hesitate to expend energy at this moment, exerting an insight that can penetrate the inner essence of things, looking at the alloy, although it can only be opened for a few breaths, but it is enough to observe the impurities in the alloy!

"It's done!" Yin Teng looked at Dahei, revealing a big smile, and a red light appeared all over his body, and his eyes showed a look of extreme excitement.

Yin Teng saw this situation, didn't say a word, and raised the hammer again and handed it to his left hand!

"Shaping begins!"

Since the contact forging, Yinteng has not only gradually improved the forging skills, but also honed the left and right hands alternately forging, the left hand is delicate and dexterous, and the right hand is steady and powerful!

Mobilize the power of qi and blood in the body, transfer the blood-colored red light to the left hand, and use the "control technique" with the right hand to manipulate the alloy the size of a pigeon's egg, and when it is forged for a while, it will not be shocked by the casting hammer and fly out.

Yinteng's left hand uses a casting hammer and his right hand is different from the powerful sinking, which is more accurate, fast and dexterous.

"Dingding......

The casting hammer in the left hand continued to hit the alloy the size of a pigeon's egg continuously, lightly, and continuously, making a crisp and pleasant metallic sound, and in the blink of an eye, under the forging of the casting hammer, the pigeon egg slowly changed its original shape at a speed visible to the naked eye, slowly changing towards the shape of Yinteng's heart......

At this moment, Yin Teng's whole body was already soaked with sweat, and the forging method of his left hand was even more difficult than that of his right hand! It was even more difficult to control! The qi and blood in his body gradually began to lose support, after all, he was only in the process of forging, and after enlightenment, he luckily entered the early stage of the third layer of the Blood Casting Realm, and the realm was not yet stable.

At this moment, the sweat met the light red gauze on the surface of the body, and suddenly turned into a white mist, steaming up from its body, which was a sign that it was about to reach its limit!

Yin Teng gritted his teeth and insisted! After about a stick of incense, on top of the anvil, the pigeon's egg was forged into a metal strip as thick as a finger of a five- or six-year-old child's finger and about five inches long -- the prototype of the carving knife!

"Solid!"

The casting hammer of the left hand is continuously and delicately struck on the various planes of the embryonic shape of the carving knife body, and this prototype is slowly forged as smooth and bright as a mirror!

"Quench!"

As the name suggests, quenching is a heat treatment method in which the prototype of the knife embryo that has been forged and stabilized is put into a liquid prepared in advance and cooled, which can greatly improve the strength and toughness of the carving knife. And the combination between the original properties of the three metals after fusion can be obtained to meet the requirements of the carving knife used for combat and inscription in the future, and even improve its hardness and performance on top of the original carving knife strength!

However, quenching is also a double-edged sword, if you do not master the control of the fire, a careless will be distorted and even cracked during quenching, and eventually ruin.

According to the memory of the Demon Blood Venerable, many excellent forgers are first-class masters when forging, but when it comes to quenching, they often stagnate, and eventually lose the first opportunity, resulting in failure. This quenching is as crucial as the dragon gate where the carp leaps over the dragon gate! Either it soars into the sky or it fails, which is regrettable.

Previously, Yin Teng regarded quenching as the top priority, he didn't want to forge the carving knife with great effort and hard work to become a scrap, and did a lot of homework, and went to Lei Tianzuo for advice several times before, and the two sometimes talked for an hour or two, until they understood the key!

In addition, some special properties of the material can also be added during quenching, so that the carving knife can obtain a certain performance and ability of the material

At this moment, on the ground on the right hand side of Yinteng, there is a wooden barrel, and in the barrel is the liquid to be quenched this time, which is made of a variety of materials, among them, there is the powder of the high-strength magnet that Yinteng grinds the 'Yuan Magnet', this 'Yuan Magnet' is like a high-strength magnet, which is the material for refining some special magic weapons, and is rarely used by ordinary refiners.

Yes, Yinteng just wants to give the knife a kind of "magnetic" property at this moment, so he has studied many ways to successfully mix this liquid!

Yin Teng looked at the barrel, carefully observing the temperature of the embryo of the carving knife, he was waiting, waiting for an opportunity, this opportunity is the temperature drop!

Suddenly, his eyes lit up, and he gritted his teeth

"Fight!"

With a movement of the right hand, the prototype of the carving knife embryo exuded high temperature, turned into a red glow, and stagnated directly above the liquid of the wooden barrel!

Yin Teng was sweating profusely at the moment, and the strength in his body was almost exhausted, but he still persevered, and his eyes looked straight at the reddish prototype of the knife embryo slowly dipping into the liquid in the barrel

"Hiss-"