Chapter 1793: Winning by Surprise
Particle beam weapons use accelerators to accelerate elementary particles such as electrons, protons, and neutrons to a high speed of tens of thousands to 200,000 km/s, and launch them through electrodes or magnetic beams to form very fine particle beams for bombardment of targets. According to whether the particles are charged or not, they can be divided into charged particle beam weapons and neutral particle beam weapons. Particle beam weapons can destroy targets tens of kilometers away in space and only several kilometers away in the atmosphere.
Edit the basic introduction of this paragraph
Particle weapon attack hypothetical
In today's world, the development of weapons has entered the atomic and molecular world, and nuclear weapons are the application of atomic theory. The protons in the center of the atomic substance are positively charged, the electrons are negatively charged, and the neutrons are neutral. Substances known as particles are electrons, protons, neutrons, and other positively and negatively charged ions. Particles can only be used as weapons if they are accelerated to the speed of light. Particle beams are emitted into space, which can melt or destroy targets, and after hitting the target, a secondary magnetic field will occur to destroy the target. [1] [2] Particle beam weapons emit high-energy, directed, intense, near-light-speed, subatomic beams (charged and neutral particle beams) that are used to destroy satellites and incoming ICBMs. Even without directly destroying a nuclear warhead, the powerful electromagnetic field impulse heat generated by the particle beam can burn the missile's electronics, or use the γ and X-rays that occur around the target to disable or damage the target's electronics. Charged particle beam weapons are used within the atmosphere. Neutral particle beam weapons are used outside the atmosphere and are primarily used to intercept ICBMs flying in the booster and mid-stages. [3]
Edit the weapon types in this paragraph
There are two kinds of particle beam weapons being studied by Russia and the United States, one is a ground-based charged particle beam weapon and the other is a space-based neutral particle beam weapon. [3] According to other sources, particle beam weapons can be divided into land-based, ship-based and space particle beam weapons according to the location of the weapon system. Ground-based particle beam weapons are mainly installed on the ground and are used to intercept targets such as intercontinental ballistic missiles entering the atmosphere, and to undertake the task of protecting strategic missile bases and other important targets. Shipborne particle beam weapons are set up on large ships and are mainly used to defend ships from anti-ship missiles. Space particle beam weapons are installed on space vehicles and are primarily used to intercept missiles and other spacecraft flying outside the atmosphere. [4]
Edit this paragraph for weapon systems
Whether it is a charged particle beam weapon or a neutral particle beam weapon, as a weapon system, they are mainly composed of five parts: particle beam generation device, energy system, early warning system, target tracking and aiming system, and command and control system. Among them, the part that can best illustrate the characteristics of the weapon is the particle accelerator and energy system, which are briefly introduced as follows: 1. Particle beam generation device The high-energy particle beam generation device is the core part of the entire particle beam weapon system. It is used to create beams of high-energy particles and gather them into a narrow beam that gives it enough energy and enough intensity. Particle beam generation devices mainly include particle sources, particle injectors, accelerators and other equipment. At present, there are still many technical difficulties to be overcome in these equipment. Chief among them is the study of high-energy particle accelerators suitable for use in weapons. Induction linear accelerators, electron induction accelerators, and radio frequency linear accelerators all have the potential to be accelerators for high-energy particles. Although the technology of existing civilian particle accelerators can be borrowed, it is too bulky to be used as a weapon system. The 500 billion electronvolt electron electron electron accelerator used by the Fermi National Laboratory in the United States, the diameter of the main accelerator alone is about 2 kilometers, and its pole turning magnets, each 6 meters long and weighing 13 tons; The Class 4 focusing magnet is 2 meters long and weighs about 4 tons; There are more than 1,000 magnets in total, and together they form a large ring with a circumference of up to 6 kilometers, which is placed in a tunnel 6 meters underground. It is conceivable that such a behemoth can be used as a weapon system? Therefore, the development of a suitable high-energy particle accelerator is the key to the development of particle beam weapons. 2. Energy System The energy system is the power source of each component of the particle beam weapon, which provides power for the weapon system and can be regarded as the "ammunition depot" of the particle beam weapon. For particle beam weapons that work in the form of pulses, ordinary generators, and ordinary power supply methods cannot meet the needs. To accelerate a large number of charged particles to near the speed of light and gather into a dense beam, a powerful pulsed power supply is required. According to some sources, in order to use a particle beam to melt a small hole in the missile body, the pulse power of the particle beam when it reaches the target is 10^13 watts, and the pulse energy is 10^7 joules. According to this calculation, if the efficiency of the accelerator can reach 30%, the power of the pulse power supply is required to be at least 3×10^13 watts, even without considering the loss in transmission. This power is equivalent to the total power of 30,000 1 million kilowatt power stations. That is, at the same moment (let's say 10^(-5) seconds), these 30,000 power stations are required to simultaneously supply power to this weapon system. Of course, this is not possible. At present, the pulse power of the special generator can only reach 10^7 watts, which is far from the requirements. It seems that with the current level of power supply, it is simply not possible to meet such high power requirements. Therefore, it is necessary to find a new way to supply electricity. The new power supply method stores energy before the weapon is working, and once used, it can release a huge amount of energy in a very short period of time, destroying and destroying the target. Now, the United States and Russia are stepping up the development of new energy storage equipment and new pulse power supplies. [5]
Edit the rationale for this paragraph
Particle Accelerator perspective
Charged particle beams in the atmosphere, which are characterized by electron beams rather than neutral beams. In the atmosphere, although it is attenuated, it can be conducted and suitable for use. In the vacuum state outside the atmosphere, the charged particle beam will be dissipated in a short time due to the repulsion between the charged particles, so the neutral particle (neutron) beam is more suitable for use in outer space. [2] Particle beam weapons generally consist of a particle accelerator, a high-energy pulse power supply, a target recognition and tracking system, a particle beam precision targeting and positioning system, and a command and control system. Accelerators are the core of particle beam weapons and are used to produce high-energy particles that are gathered into dense beams that accelerate to the point where they can destroy targets. The target recognition and tracking system is mainly composed of search and tracking radar, infrared detection device and microwave camera. After the detection system discovers the target, the target signal is processed by the data processing device and the ultra-high-speed computer, and then enters the command and control system, and according to the instructions, the positioning system tracks and aims at the target, and at the same time corrects the influence of the earth's magnetic field, so that the particle beam is aimed at the position where the target will be destroyed, and then the accelerator is started to launch the particle beam. 1. Charged Particle Beam Accelerator A particle beam weapon system capable of effectively countering ballistic missiles
Linear ferrite field-induced accelerators are typically used to generate high-speed electron beams with an absolute speed of 300,000 kilometers per second. The ground-based particle accelerators developed by Russia and the United States are all proton accelerators, and their basic principles are: first, the electrons generated by the electron beam generator are accelerated, and then they vibrate on the high-frequency oscillation device, and then the incoming protons are surrounded by electrons on the ion generator device, so that they enter the ion accelerator device for acceleration, and the protons are accelerated by receiving energy. As it approaches the exit, the electrons are removed, and the magnetic field is used to turn them into sharp, high-energy directional beams, which are then emitted into space. [6] 2. Neutral Particle Accelerator uses the method of accelerating atoms to create neutral particles, which are then gathered into sharp high-energy directional beams that are emitted at nearly the speed of light to destroy or disable targets. The scheme of the United States research to produce neutral particles is to accelerate and aggregate negative ions in the accelerator, remove the excess electrons at the exit of the accelerator, and emit them into a neutral hydrogen beam, and require this process to ensure the mass and energy of the hydrogen atom beam. In order for neutral particle beam weapons to enter combat use, a certain number of satellites must be used for early warning and detection. Early warning satellites send data on detected targets to ground stations, requiring a specific satellite network and an inertial navigation system to determine the position of satellites and targets in real time, as well as an attitude control system that can aim at targets in any direction of the satellite. [3]
Edit the mechanism of destruction in this paragraph
The destruction mechanism of particle beam weapons is kinetic energy killing and γ and X-ray destruction. The particle beam is not affected by the natural environment such as clouds, fog, smoke and the reflection of the target, and will not fail due to the target being obscured or disturbed, and its all-weather and anti-interference performance is good. The particle beam directly penetrates into the depth of the target and does not need to be maintained for a certain period of time, which is conducive to attacking multiple targets. If the particle beam does not directly hit the target, it will generate γ and X-rays around the target, causing a second type of damage and destruction. [3]
Edit the performance of this paragraph
Schematic diagram of the attack of the former Soviet Union's land-based laser anti-satellite weapons
The destructive effect of the particle beam is manifested in: (1) vaporizing or melting the target structure; (2) Premature detonation of the fuse in the warhead or thermonuclear material that destroys the warhead; (3) Disabling or destroying the electronic equipment in the target. [7] Particle beams can perform both "hard kills" that directly penetrate targets and "soft kills" that fail locally. The charged particle beam has a strong ability to penetrate the target, the energy is concentrated, the pulse emissivity is high, and the emission direction can be quickly changed. The neutral particle beam can also perform telemetry on neutrons, γ, and X-rays generated around the target to achieve target identification. [3]
Edit this paragraph pros and cons
Key Benefits:
The speed of particle beam weapons is close to the speed of light, so it has the advantages of laser weapons, which can shoot at targets at any time, can also flexibly adjust the direction of shooting, and can intercept multiple batches of multiple targets at the same time. As long as the energy supply is sufficient, it can fight continuously. In addition, particle beam weapons are not limited by meteorological conditions, and in future wars, it is both a competent guardian and a super killer. [4] Particle beam weapons are more difficult to develop than laser weapons, but are more promising as space-based weapons than laser weapons. Its main advantages are: (1) no optical devices (such as mirrors); (2) the accelerator that generates the particle beam is very strong, and the accelerator and magnet are not affected by strong radiation; (3) The energy transmitted by the particle beam to the target within the unit solid angle is greater than that of the laser, and it can penetrate deep into the target.
Main disadvantages:
The main disadvantages of particle beam weapons are: (1) when charged particles are transported in the atmosphere, due to the continuous collision between charged particles and air molecules, the energy decays very quickly, while neutral particles cannot propagate in the atmosphere; (2) Charged particles are defocused when they are transported in the atmosphere, so the particle beam used in the air can only hit a close target, while the neutral particle beam also spreads when it is transmitted in outer space; (3) Affected by the earth's magnetic field, the beam will be bent and deviate from the original direction. [3]
Edit the status of the study in this paragraph
U.S. Expected Satellite Laser Weapons (File Picture)
Since 1975, U.S. early warning satellites have repeatedly found a large amount of tritium-laden gas hydrogen in the atmosphere, which is believed to be caused by the emission of charged particle beams. In 1976, the U.S. early warning satellite detected that the former Soviet Union had conducted a test of a nuclear fusion pulsed electromagnetic fluid engine that produced a beam of charged particles in the desert of Kazakhstan. There is information that the research on particle beam weapons began in the former Soviet Union in 1974, the United States in 1978, and began theoretical verification in the laboratory in the mid-80s of the 20th century. [8] Since the mid-70s of the 20th century, the former Soviet Union has conducted 8 experiments on charged particle beam conduction methods on a series of spacecraft satellites, manned spacecraft and the Salyut space station in the ionosphere and outside the atmosphere. Ground tests of particle beam weapons have been carried out in the Leningrad region, including linear electromagnetic induction accelerators, γ-ray instruments, X-ray instruments, magnetic memory and multi-channel ultra-high voltage switches, and tests of charged particle beams on intercontinental ballistic missiles, spacecraft and solid-fuel targets. In 1978, the former Soviet Union built a 0.5 MV, 80 J, 16 layers and 7 rows of particle beam generation devices in East Germany using 1000 GeV proton acceleration technology. In the 70s of the 20th century, the US Navy established the Seesaw program for the development of particle beam weapons, studying nuclear warheads to intercept missiles with charged particle beams. In 1981, the U.S. Department of Defense established the Bureau of Directed Energy Technology to develop particle beam weapons and laser weapons, and began a five-year development program with a budget of $315 million in fiscal year 1981. When used as a weapon, particle beams must have both high currents and high energy and several megawatts of energy, and they must increase their power by thousands or even tens of thousands of times on the existing basis. When the particle beam hits the target, it releases electrons, and the protons pass straight in, stopping when the energy is exhausted. The vertical penetration depth of a neutral tritium beam of 100 MeV to various substances is: solid propellant 9.5 cm, lead 3.3 cm, aluminum 0.8 cm. Soviet land-based laser anti-missile weapons (file photo)
In order to solve the problem of transmission distance in the atmosphere, ground-based particle beam weapons have low defocus, and it is very difficult to produce the brightness of 1020~1021J/sr required to achieve the goal of destroying future reinforcement. Since neutral particle beams cannot travel through the atmosphere and can only be mounted on satellites, reducing the size and weight of the accelerator is another challenge. In addition, it is necessary to study the mechanism by which neutral particles destroy the equipment inside the target. Ground-based particle beam weapons need to have sufficient range to fire particle beams from the ground. Space-based particle beam weapons are to operate in outer space, and in terms of surveillance and tracking systems, the requirements for sensors are extremely high, and they need to be suitable for the size and weight of the space to be deployed. In the 80s of the 20th century, the particle beam accelerator built by the former Soviet Union in Saryshagan, Kazakhstan, covers an area about the size of four football fields, and the particle accelerator of the United States is also the size of a building, so it is difficult to achieve space-based deployment. The principle of particle beam weapons is not complicated, but it is very difficult to enter real combat. The first is the issue of energy. Particle beam weapons must have a powerful pulse power. To burn a small hole in the missile shell, the pulse power of the particle beam reaching the target must reach 1013 and the energy must be 107 J. Assuming that the efficiency of the particle accelerator is 30%, even without considering the energy loss of the particle beam in transmission, the power of the accelerator pulse power supply will reach at least 3×1013, while the power of the most advanced pulse power supply currently under development is only 107. The most critical pulsed power technology for the practical application of neutral particle beam weapons is the continuous-wave very high frequency (VHF) radio frequency source. [3]
Edit this paragraph for technical difficulties
It is precisely because of the above-mentioned series of technical difficulties that although Russia and the United States are actively researching particle beam weapons, ground-based and space-based particle beam weapons are still in the stage of feasibility verification in the laboratory, and it is estimated that they may enter actual combat deployment after 2020. The basic work done in the United States includes theoretical verification and laboratory testing of particle beam generation, control, orientation and propagation technologies, experiments with accelerated test benches to verify the feasibility of neutral particle beam schemes, and the exploration of charged particle beam schemes. According to the U.S. space-based particle beam weapon program, the hydrogen atomic beam has an energy of 200 MeV and a weapon weight of 60 tons, which is used to intercept the warheads of intercontinental ballistic missiles flying in the extraatmospheric booster and mid-stages. The starting point of Russia and the United States for particle beam weapons is based on space operations and defense, and the main work is basic research and research on high-energy conversion technology. The research on ground-based particle beam weapons is limited to short-range weapon systems as point defense operations, mainly to ensure the stable propagation of charged particle beams in the atmosphere over long distances. The United States has identified potential uses for particle beam weapons as intercepting missiles, attacking satellites, and carrying out mine clearance outside enemy defense zones. The current method of generating particle beams is to use linear electromagnetic induction accelerators, but the accelerators are too bulky to be used on the battlefield. In its basic research, the United States is mainly focusing on the study of small-scale, high-efficiency accelerators and their technologies suitable for deployment on ground-based and space-based anti-missile platforms. The United States uses a linear electromagnetic induction accelerator to generate a particle beam, and through the same accelerator, the pulsating particle beam is continuously recirculated so that the particle beam can circulate in the existing small accelerator, gradually adding energy to the particles that pass through each time. According to the U.S. Army Ballistics Research Laboratory, further confirmation of the principle of the small circulating electromagnetic induction accelerator is needed. Whether such an accelerator can be used on the battlefield or not, the size and weight of the accelerator are key factors. The United States has also developed an experimental accelerator device that is no larger than a desk, which is an acceptable size for deployment in outer space. The purpose of research in energy conversion technology is to form high-speed particle pulses. According to the U.S. Air Force research institute, the research on traditional thyristor switches and spark discharge switches has been completed, and the next step is to carry out research on magnetic switches, which are based on the principle of saturated electromagnetic induction and have a high repetition rate. [3]
Edit this section for weapon applications
Applications in high-tech warfare
According to the results of US research since the 80s, the application of particle beam weapons in high-tech warfare mainly lies in the use of neutral particle beam weapons to intercept ICBMs and identify the mid-flight segment of warheads. Due to the technical difficulty of solving the problems of particle beam generation devices, energy systems and high-energy particle beam transmission, the use of neutral particle beams for the identification of the midsection of ICBM warheads may be the only feasible application in the foreseeable future. The mid-course defense of ICBMs is both very important and very complex, because modern ICBMs release a large number of decoy and dummy warheads in addition to releasing warheads in the mid-flight stage, and in order to carry out mid-course defense, the real warheads must first be identified from a large number of fake warheads, and this is a very difficult technology. Neutral particle beams are effective in identifying real and fake warheads that are difficult to identify using commonly used imaging and radiometric techniques, as well as low-power laser or microwave detection techniques. [5]
Appear in the new online game
A ranged mech equipped with particle weapons
The ranged mech in "Mecha Century II" is a good illustration of the excellent side of particle weapons with long range and high lethality. Unlike today's particle weapons, in the era of Mecha Century II, due to the rapid development of atomic physics technology, the mass and volume of particle weapons have shrunk to the point where mechs can be directly assembled. Although the appearance has been reduced, the basic structure of the particle source, particle accelerator, and guide magnet coil has been retained. [2] The problem of high energy consumption has always been a major obstacle to the development of particle weapons in games, but with the development of the research project on the dish-shaped abandoned ship, the positive and antimatter annihilation energy, which is more powerful than nuclear energy, has gradually been used by humans. The bottleneck in the development of particle weapons has finally been broken.