That's right. Duan Yun was suddenly stunned when he heard this.

The competition is carried out in the whole factory, and each technical invention will be registered and evaluated, and then the factory committee and the technical department will be evaluated, and the selection process is still very formal.

"There is one more thing I want to tell you...... Wang Qiang looked around, and whispered to Duan Yun: "This time Tian Feng's modification plan is very strong, a few days ago when he tested the modified lathe, the processing efficiency is very high, automatic processing of the gear box modulus 1.5 tooth embryo, rough turning and fine turning are completed in two batches, and twelve are processed in half an hour, which is enough to calculate twelve times the efficiency of our ordinary lathe......"

"Uh. Duan Yun was stunned when he heard this.

Duan Yun clearly remembers that he tested the lathe he modified on the night shift last week, and it was also processing a tooth germ with a modulus of 1.5, and a total of 81 were processed in an hour, and the average was 20 in an hour.

And if according to Wang Qiang, Tian Feng's modified lathe can process twelve in half an hour, then twenty-four can be processed in one hour, which is four more than Duan Yun's processing capacity!

"Did you see the test that Tian Feng conducted with your own eyes?" After a moment, Duan Yun asked with a frown.

"Yes, I was on the scene when he was testing, and not only me, but also Chief Engineer Cheng and several leaders came to watch. Wang Qiang said.

"Then this is amazing......" Duan Yun nodded when he heard this, but his eyes were still a little puzzled.

Because in Duan Yun's view, there is an upper limit to the improvement of the efficiency of lathe automation modification, considering the speed of the host, the bearing capacity and loss of the cutter head, the lathe he modified before can be said to have basically achieved the maximum efficiency, unless the host with greater power is replaced, otherwise, there will not be much improvement.

And Tian Feng's modified lathe actually produced one-fifth more than Duan Yun's modification plan, which undoubtedly made Duan Yun feel surprised and puzzled.

But in any case, the game was about to start, and Duan Yun had no time to overturn the previous plan and improve it again.

"I guess Tian Feng must have someone to help this time, this kid used to draw a drawing data and always made mistakes, and a lot of materials were wasted, and now he can suddenly make such a powerful technical change, I don't believe it if it's not boring." Wang Qiang snorted disdainfully, and then said to Duan Yun: "So don't be discouraged even if you don't get the first place this time, there will definitely be such a technical transformation competition in the future......"

The meaning of Wang Qiang's words is very clear, that is, Tian Feng has a great chance of winning the first place, after all, the factory director Qin Gang is his second uncle, and those judges will definitely take care of it secretly, plus there are masters behind him, and the efficiency of the machine tool modified some time ago is amazing, so Duan Yun basically has no chance of winning the first place.

It's just that Wang Qiang can't say this kind of thing clearly, so he can only comfort Duan Yun in advance.

"Understood. Duan Yun smiled and nodded.

"Then you just wait at the workstation first, I'll go. Wang Qiang patted Duan Yun on the shoulder and said.

"Then you're busy!"

After Duan Yun finished speaking, Wang Qiang turned around and left.

After seeing Wang Qiang leave, Duan Yun opened the tool cabinet next to the workstation and began to work on time.

During this time, Duan Yun would check his tool cabinet every night shift, in order to prevent the theft of design drawings, Duan Yun had put some of these important gear modification workpieces into Cui Lin and Leizi's tool cabinet, and kept them properly, until the morning when they took over, the two of them put those key workpieces into Duan Yun's toolbox.

However, Tian Feng was not stupid to think about it, knowing that Duan Yun was on guard this time, so the theft of workpiece drawings never happened again.

After sorting out the workpieces, Duan Yun saw that Tian Feng also came to the frame at this time, walked to an idle station, and also opened the toolbox to sort out the workpieces.

For a whole morning, Duan Yun did not wait for the arrival of the factory leaders, it is estimated that as the workshop director Wang Qiang said, the competition of a workshop is the highlight of the finale, after all, gear machining is the most important step to improve production efficiency, and it is only the key project of this technical transformation competition.

At half past eleven o'clock in the afternoon, when it was lunch time, Duan Yun and other employees went to the canteen to eat.

Two steamed buns and a large stew cost less than two cents, and Duan Yun felt that the big pot of rice for this meal could make do.

And just as Duan Yun was sitting in the corner of the cafeteria eating, several female workers in the distance glanced at him from time to time.

Since Duan Yun received Wu Baiyuan's technical transformation bonus last time, and the salary was nearly 600 yuan that month, many people have begun to look at Duan Yun differently, including some female workers in the workshop.

is the so-called marrying a man, marrying a man, dressing and eating.

Income and family background have always been the top priority conditions for female workers in the factory to find a partner, and now Duan Yun has earned a salary that other employees in the factory can only earn in a year, which is indeed a little envious.

In addition, although Duan Yun's family conditions are average, there is no brother and only one sister, and the burden is much smaller, plus now Duan Yun is a regular worker in a technical job, he is in good health, and his appearance is okay, and the comprehensive conditions are more than enough than the above, so he has already received the attention of some female workers.

It's just that Duan Yun has been working night shifts before, and now it is rare to be able to appear in the unit during the day, so some female workers have moved their minds.

Two or three female workers sat next to Duan Yun, eating in an elegant posture, looking at Duan Yun from time to time, and subconsciously swept the bangs on her forehead with her hands.

Women in these years are very reserved, but it is very easy to meet a man you like and want to hint at it, look at each other, and then find a way to talk to each other, and after looking at each other, they begin to develop in the aspect of 'underground work'.

Duan Yun is a human being, and he naturally still has this emotional intelligence, but several female workers gave him glances from time to time, but Duan Yun never had the intention of answering, and after he was full of water and food, he got up and left the cafeteria.

After returning to the workshop and finding a corner to smoke a cigarette, Duan Yun saw a group of people walking into a workshop from a distance.

The leader is Qin Gang, the director of the factory, and next to him are the leaders of some general factories such as secretary Zhao Dongsheng and chief engineer Chang Lin.

Behind the leader was a middle-aged woman holding a record book, which was probably registered for the technical transformation competition.

However, to Duan Yun's surprise, Cheng Qingyan also followed the crowd at this time, but her expression at this time seemed very relaxed, and she also held a notebook in her hand, but she did not sign up for this competition, it is estimated that she followed her father to visit and study, after all, she is also a member of the technical department of the factory.