After going home and lying on the bed for more than two hours, Duan Yun's previous alcohol has completely disappeared.

In his previous life, Duan Yun didn't drink much, but now this body obviously has a good amount of alcohol.

Originally, Duan Yun planned to drink only one cup just now, but later he and Li Guosheng talked more and more speculatively, and a bottle of wine was drunk by the two of them.

If it was in his previous life, Duan Yun would almost 100% have to go home and 'lie down', but now at most, he will rest for a while and go to the toilet, and he will be completely drunk.

After washing his face in the water room, he suddenly felt a lot refreshed, carrying a lunch box and riding a bicycle, Duan Yun went to the workshop to work the night shift.

Changing into work clothes, Duan Yun looked at the empty workstation and felt a little lost in his heart.

In any case, when Master Han Zhong was there, he didn't have to worry about many things, but now that he is on his own, he suddenly has some unspeakable pressure.

If you want to gain a firm foothold in this workshop and get the attention and goodwill of the leadership, technology and workload are hard standards.

Although as an apprentice, no one has taken him seriously yet, but Duan Yun's personality has always been very strong, whether in school or in the unit in his previous life, even if he can't be top-notch, then at least he must reach an excellent level.

After taking out the goggles from the toolbox and putting them on, Duan Yun started the lathe and first processed a stigma to warm up.

And at this time, Huang Haitao, the squad leader, came over.

Today is Duan Yun's first day of official employment, and as the leader of the squad, Huang Haitao must focus on observing it first.

"Huang squad leader......" Duan Yun greeted with a smile after turning his head to see Huang Haitao.

"Don't look at me, look at the workpiece!" Huang Haitao motioned to Duan Yun not to be distracted.

Huang Haitao doesn't really care about how many workpieces Duan Yun can process in a day, he attaches the most importance to production safety.

Although state-owned enterprises can make a foolish life, and they can get money for doing more and less, they are very strict about safe production.

Many young employees on the night shift like to surf around during the day, and they don't make up for sleep, and when they go to work at night, they are groggy and have serious lack of energy.

And this is often the time when accidents are most likely to occur.

However, at this time, Huang Haitao saw that Duan Yun looked very energetic, and his expression was also very serious when he was processing parts, and his face suddenly eased.

After watching Duan Yun process three stigmas in a row, Huang Haitao picked up the vernier card and checked it, and after all of them were qualified, he left with peace of mind after settling down for two more sentences.

Seeing Huang Haitao leaving, Duan Yun turned around and opened the lowest level of the toolbox, took out the modified parts and servo motors, and then quickly installed them.

Re-applied some butter at the gear connection, Duan Yun wiped it clean with a rag handle, and then added the oblique angle iron to the blank to be processed, replaced the spring clamp, and started the lathe again.

"Buzz!"

With the humming sound of the rapid rotation of the spindle of the lathe, the first wool fitting rolled to the chuck head and was lowered, and the linkage device was quickly fixed on the spring chuck head.

The two servo motors are started at the same time, the sharp turning tool is accurately advanced to the specified position, and the coolant covers the cutter head for the first time.

"Squeak!"

Blue-black iron filings slipped off the workpiece, revealing a shiny metallic sheen.

It only took about a minute for the first workpiece to be machined.

And after seeing that the second workpiece was successfully and automatically loaded into the clamping head, Duan Yun breathed a sigh of relief.

After entering the automated processing, Duan Yun's whole person was freed from the station.

All he needs to do now is add blank to the angle iron shelf for a while and replace the worn cutter bits.

At this time, Yun was not completely idle, but stood in front of the tool cabinet, took out paper and pen, and began to write and draw on it.

In Duan Yun's opinion, the automation device he is using now actually has a certain amount of room for modification, but due to the shortcomings of the congenital slow speed of the lathe spindle, the efficiency of remodification is destined not to be greatly improved, so Duan Yun began to think about other lathes in the factory.

Duan Yun still knows a lot about the other lathes in use in the factory.

In his previous life, when Duan Yun was working in the Northern Locomotive Factory, there was this kind of lathe produced by the Northeast Eighteen Arhats in the factory, and Duan Yun's original lathe technology was actually practiced on these lathes.

Perhaps the layman feels a little strange that the domestic factories in the seventies and eighties still use this kind of domestic lathes in the seventies and eighties, but the reality is that even during the period when Duan Yun worked in the locomotive factory, the penetration rate of digital machine tools in domestic enterprises is still not high, and it does not even reach the popularity level of the developed countries in Europe, America and Japan in the seventies and eighties of the twentieth century, and many high-end CNC machine tools can only rely entirely on imports, which is a situation that sounds frustrating but is true.

Duan Yun is not able to do anything domestic CNC lathe in this year for the time being, which is simply unrealistic, but it is still easy to modify the domestic ordinary lathe and improve the processing efficiency.

In fact, when Duan Yun was in the factory in his previous life, he proposed a modification plan for this kind of domestic lathe, but in the end it was all rejected.

In fact, now Duan Yun thinks that he was indeed a little naïve at the beginning, and there was no problem with his technology in modifying the lathe, but he did not consider the reality of the factory at that time.

As the saying goes, the butt determines the head, and the leaders and workers look at the problem differently.

Just as he originally wanted to modify the lathe in the locomotive factory, Duan Yun considered how to improve the production efficiency of the workshop and improve the production process.

The leaders are considering how to arrange the idle workers after the lathe is completed in automation modification, especially those senior technicians who are related to the factory leaders and have worked for a long time, why can they continue to get the high wages in the factory, these are all things that will give them a headache, so it is better to have more than one thing, and put Duan Yun's technical transformation plan on the shelf......

So this also reminded Duan Yun that he wanted to do any technical transformation in this factory, and there was no leader as a backer, or the timing was not in harmony, which was also the main reason why Duan Yun wanted to do everything possible to get involved in the secretary's line before.

In addition, in Duan Yun's opinion, he still has a good chance of succeeding in this kind of technical transformation in the workshop.

When drinking with Li Guosheng at night, Duan Yun learned about the current situation of the factory.

Nowadays, the Red Star Gear Factory has received a lot of orders, and the factory's two fist products, single hydraulic pillars and gearbox gears, have reached the extent that they are in short supply, and even some units have not been able to get the goods in a short period of time.

On the other hand, the factory has promised to build a number of new houses this year and next year at the workers' congress last year to ease the housing pressure of the factory workers, but now it is limited to the limited production capacity of the factory, although it is more than enough to cope with the planned production tasks, but it is unable to produce too many unplanned products, resulting in the factory not enough funds to keep its own funds, and the matter of building new houses will naturally become far away......