"Director Wang, come out for a moment. At this time, the office door was pushed open, and an old man with gray temples and overalls poked his head out and motioned for Wang Qiang to come out.

"What's the matter, Lao Xie?" Wang Qiang immediately put down the newspaper and walked out after seeing that the person who came was Xie Yuanxiang, the squad leader of the maintenance team.

"Come with me. Xie Yuanxiang said, leading Wang Qiang to the workshop.

At this time, the workers on the morning shift of a workshop were busy with each other, and after passing through an aisle, the two came to a lathe station.

And this station is the Duan Yun station.

"What's going on?" Seeing Xie Yuanxiang's grim face, Wang Qiang immediately had a bad premonition.

"Just now I came over to use this lathe to process the pins, but it turned out that the lathe seems to have been artificially damaged...... Xie Yuanxiang pointed to the shell of the main engine box and feed box, and said: "Look here, it is obvious that it has been cut by someone with a grinder, and a piece has been added outside. ”

It turned out that Xie Yuanxiang, who went to work in the morning, wanted to make a repair and replacement pin, and saw that there were people busy at other stations, but only the 'classic car' at Duan Yun's station was idle, so he took a piece of iron embryo and prepared to process it himself.

But just by looking at the lathe, Xie Yuanxiang saw that this machine had been modified, in addition to the extra angle iron shelf and a few extra power cords outside, the shell also changed a lot, which couldn't help but make Xie Yuanxiang, who was the maintenance squad leader, feel the seriousness of the matter.

Without the permission of the factory leaders, it is definitely not a trivial matter to modify the lathe without authorization, so Xie Yuanxiang immediately found the workshop director to report and clear the responsibility.

"Then can the lathe be used now?" Wang Qiang's face also revealed a little anxiety and anger.

"It's still no problem to use, I tried it just now, but the noise seems to be a little louder than before, probably because the vibration of the iron sheet is relatively large after the shell is changed. Xie Yuanxiang said.

"I know about it. Wang Qiang's face relaxed a little when he heard this, and then he turned his head and shouted to a young worker at the workstation at the door of the workshop: "Xiao Liu, come here!"

"Hey!" the young worker replied, closed the lathe, and ran quickly.

"Xiao Liu, do you know the home of Huang Haitao, the third squad leader, and Duan Yun, who just came to our workshop?" asked Wang Qiang.

"I don't know. ”

"Follow me to the office to check the address of the two of them, and when you turn around, you will immediately call these two people to the workshop on your bicycle!" Wang Qiang waved his hand and led the young worker to his office in a big stride......

......

At the same time, Duan Yun was at home.

After Duan Yun explained the matter to Cao Dong, he went home for breakfast and was about to lie down in bed when there was a sudden knock on the door outside.

"Who?" Duan Yun asked loudly with a frown.

"Duan Yun, is it Duan Yun's family?" a man's voice came from outside.

"Wait!"

When Duan Yun heard this, he hurriedly pulled back the pants that had just been half taken off, put on his slippers, and opened the door.

"Squad Leader Huang?"

When Duan Yun saw that one of the two people standing at the door was his squad leader Huang Haitao, he said with some surprise.

"Hurry up and get dressed, Director Wang asked the two of us to go to the workshop immediately. Huang Haitao said with a frown.

"Right now!"

After Duan Yun finished speaking, after putting on his clothes, he locked the door of the house, and quickly left the corridor with Huang Haitao and the young worker.

On the way back to the factory, Huang Haitao and Duan Yun's faces were a little nervous.

There is no doubt that Wang Qiang suddenly sent someone to call the two people who had finished the night shift back to the workshop, and there must be something big happening in the workshop.

In fact, Duan Yun faintly felt that Wang Qiang asked him to go over at this time, mostly because of his own modification of the lathe.

He processes more than 700 finished products every day in the past few days, which is more than ten times that of others, and Wang Qiang, as the director of the workshop, will definitely find out, after all, the workload report of the workshop workers every day is to be handed over to him.

It's just that Duan Yun didn't expect the 'East Window Incident' to happen so soon, and it is still unknown how the workshop will deal with it in the end.

But in any case, Duan Yun will never work in vain to modify this matter, and he must get the bonus that should be given!

More than ten minutes later, when Duan Yun and Huang Haitao walked into the workshop, they saw at a glance that Wang Qiang and the masters of several other workshops were already standing next to their workstations.

After Duan Yun and Huang Haitao appeared, the morning shift employees who were working also looked at the two of them at this time, including Zhao Xiaoli, and many people had a bit of curiosity and schadenfreude in their eyes.

"You two hurry up!" After seeing Huang Haitao and Duan Yun, he shouted to the two of them with a straight face.

"Director Wang, what's the matter?" Huang Haitao saw that Wang Qiang's face was wrong, and immediately greeted him with a smile on his face.

"What's going on!?" Wang Qiang pointed to the lathe with his hand and said to Duan Yun and Huang Haitao: "Why did you destroy the lathe? Who did it!?"

"It's me!" Duan Yun immediately walked in front of Wang Qiang when he heard this, and said, "I have made an improvement to this lathe......

"You are so bold!!" Wang Qiang was furious, and shouted angrily, and half of the workers in the workshop looked over.

"And you!" Wang Qiang turned his head to look at Huang Haitao, and he was even more angry, and said loudly: "I told you to keep an eye on this kid for me, but it turned out to be good, you didn't even find out about such a big thing as destroying the lathe, and you should fart the things I arranged for you before!?"

"Director Wang, it's not ......"

"What's not!?" Wang Qiang glared at the bull's eye and said: "I'll tell you clearly, Duan Yun destroyed the lathe, he will be punished, and you won't be able to run!

"Which ...... In fact, I already knew about Duan Yun's modification of the lathe before......"

"Then you know that you haven't reported this matter to me, let him do it so brutally!?"

"But I have already reported this matter to Secretary Zhao, and Secretary Zhao also agreed......" Huang Haitao said with an aggrieved face.

Zhao ...... The secretary agreed!?"

As soon as Huang Haitao's words fell, Wang Qiang and Xie Yuanxiang beside him were stunned for a moment.

"Secretary Zhao does know about this. Duan Yun said.

"If you don't believe it, you can ask Secretary Zhao. Huang Haitao also interjected.

"Okay, don't shed tears if you don't see the coffin, right? I'll call Secretary Zhao over!" Wang Qiang obviously didn't believe the words of the two, in his opinion, Secretary Zhao was the most cautious in doing things, and he would definitely not allow a stunned young apprentice to do this kind of thing, so he turned his head to Xie Yuanxiang standing behind him and said, "Master Xie, please go and call Secretary Zhao and let him come to see the situation here." ”

"Cheng!" Xie Yuanxiang finished speaking, turned around and left the workshop.