"I was going to surprise you, but I didn't expect it to be seen by you before I said it. Seeing that Zhuang Jianye suddenly said the name of the device in front of him, Wei Guangping couldn't say what his expression was, but he was immediately relieved and nodded admiringly: "It's no wonder that Tengfei Factory has what it looks like today, you, the director of the factory, are not only Dong Ran, but also a knowledgeable person." ”

After speaking, he laughed stupidly: "But in this way, I will be relieved that we will hand over the Zero Factory to you, at least, this stomach will definitely not be hungry." ”

"Look at what you said, with this set of equipment, I dare to guarantee that the annual output value of your zero degree factory will be at least over 100 million in the next ten years!" Before Zhuang Jianye could speak, Peng Chuan put on a hard hat and a mouth full of stubble, and gave Wei Guangping a frightening assertion with one mouth.

Yes, Wei Guangping was really taken aback, you must know that now relying on the unified purchase and sales of the Tengfei factory, the annual output value of the zero degree factory can barely reach more than 7 million, and the annual output value of more than 100 million is unimaginable.

The output value of the zero degree factory can exceed 100 million, which is a bit too alarmist!

"Wei Gong, you can not believe Lao Peng's words, but the judgment of mechanical equipment is still very accurate, alas~~~ Wei Gong, don't tell me, you just took this set of equipment out of the pile of rags and assembled it, and you didn't think about copying our own flexible tooling equipment on this basis?"

Zhuang Jianye agreed with Peng Chuan's judgment, nodded and said a few words, suddenly realized a problem, and turned his head to look at Wei Guangping.

Wei Guangping was stunned when he boarded, he really didn't think much about it, didn't Zhuang Jianye just ask them to sort out the parts of the equipment that had been shipped? Did he say that he wanted to imitate it? Why didn't he remember? So he asked rhetorically: "Imitation? You haven't mentioned this question before?"

In a word, not only did Zhuang Jianye almost fall, but Peng Chuan also stumbled.

I finally understood that the zero degree factory had a lot of ability, how could it make life miserable, and such a big gold mine in front of me could be ignored there, and it seemed that life was not good.

But think about it, Tengfei factory is from adversity all the way out, from the leadership, down to the ordinary employees of the cost, benefit market prospects have long been deeply rooted in the hearts of the people, this is the wolf nature that Huang Feng said at the beginning.

So if this is in the Tengfei Factory, seeing this kind of good thing, just a project leader can fight for the head.

No way, the prospect of this flexible tooling equipment is really too big, not to mention anything else, is its excellent versatility, a year can save hundreds of millions of tooling design and development costs for aviation manufacturers.

Because of this, once this product is launched, it will definitely become a hit chased by major aviation manufacturers, just like the multi-impeller shot peening machine.

In this way, not to mention the price of a piece of equipment, it is the service fee for logistics maintenance and maintenance, which can make the factory lie down and make money.

Not to mention anything else, although the sales of the multi-impeller shot peening machine sold by the Tengfei factory have not improved much, the overall profit is second only to the existence of export drones in the entire Tengfei factory, which is higher than the profit margin of the medical equipment that has just risen.

The reason for this is that the annual maintenance service fee and spare parts sales cost are always maintained at a very high level.

After all, advanced aviation professional processing equipment such as multi-impeller shot peening machine is not a bicycle or a TV, which can be done well if it is dismantled and tinkered with, without the participation of professionals, the production plant does not dare to start in an uncertain situation, and the most professional in China is the Tengfei factory, so the money Tengfei factory earns is called a peace of mind.

Now there is a professional aviation manufacturing equipment that is more valuable than the multi-impeller shot peening machine in front of us, that is, Wei Guangping, an intellectual who only cares about scientific research, is indifferent, Zhuang Jianye and Peng Chuan have long been full of yellow gold.

Although Wei Guangping has no concept of market and profitability in his eyes, he has a very good obedience, seeing that Zhuang Jianye really wants to imitate flexible tooling equipment, and is frowning and remembering the feasibility, but the more he thinks about it, he feels that this matter is difficult, so he said: "We can still do this piece of machinery and equipment, but we can't do it in the control system." ”

As he spoke, Wei Guangping casually nodded around and said, "Where do you look, where is it, where is it...... It's all about laser tracking points and camera locators around the device.

The laser tracker is a device that uses a laser as a measurement carrier and a reflective target ball, and is equipped with an angle measuring mechanism rotating around two axes to form a spherical coordinate measurement system, which can not only measure stationary workpieces, but also track and measure moving workpieces or related combinations. ”

As he spoke, Wei Guangping pointed to a few things similar to the size of a projector, and continued: "However, because the brightness of the laser is too high, workers will experience visual fatigue when operating for a long time, so this set of equipment uses cameras and monitors and fastener position recognition of the workpiece itself, combined with the accurate measurement of laser points to accurately locate the workpiece."

We have calculated that the positioning accuracy of this system can reach 0.125mm, which is higher than the accuracy of most of our special tooling equipment. But ......"

Having said so much, this set of second-hand small flexible tooling equipment from Lockhit in the United States does show its extraordinary ability, but no matter how good the thing is, it still can't stand one, but, Wei Guangping turned his words and said a fact that made Zhuang Jianye and others frown: "Our domestic whether in the field of laser or in the design of monitoring has not reached the technical level of this equipment, you must know that this is the second-hand equipment produced in the late seventies in the United States."

That's all it takes, it's more critical to connect the computer control system of the whole set of measurement and monitoring devices, firstly, we do not have professional industrial control software, and secondly, we do not have a working condition database of aircraft components, not to mention imitation, it is not easy to produce TY-2 UAV platform with this flexible tooling equipment in front of you. ”

Hearing this, Zhuang Jianye couldn't help frowning, and was just about to ask why he couldn't produce his own drone, Lin Guanghua, who walked quickly, said: "The Yankees locked the industrial control software, and this set of equipment can only produce several structural parts of small aircraft in accordance with the inherent software program, but this is not much of a problem, our UAV platform is originally open, coupled with the accumulation of wind tunnel tests in recent years, you can adjust the parameters according to the program settings of the American software." ”

Lin Guanghua, the first brother in the aircraft design of the Tengfei Factory, gave a good or bad answer, and Zhuang Jianye was immediately relieved, it is obvious that this is the usual means used by the United States to firmly pinch the high-end manufacturing equipment of aviation.