Aren't you awkward?"

Tengcun Machine Tool Factory, Wen Jianmin, the workshop director of the gear workshop, said helplessly to the miller Gao Shuchun.

A few days ago, Tengji signed a cooperation agreement with Linyi Machine, allowing Linyi Machine to lease Tengji's plant and equipment, and hire Tengji workers to produce machine tool products for Linyi Machine. Subsequently, Linyi Machine took orders for several gantry milling machines and began to recruit workers from various workshops of Tengji for production. Gao Shuchun, as the most skilled miller in the gear workshop, was included in the list of workers recommended for Linyi Machine.

Tengji has been running out of production tasks for a long time. Gao Shuchun and his co-workers are idle three or four days a week, and can only find a corner of the workshop to play cards to kill time. I heard that there was work to do, everyone signed up very enthusiastically, and of course I wanted to hire a group of workers with a higher technical level, so Gao Shuchun stood out among the crowds.

According to the agreement between Tengji and Linyiji, the wages of the workers hired by Linyiji are borne by Linyiji, and Linyiji will also pay another fee to Tengji, which is regarded as the rent of borrowed personnel and equipment. From the Teng machine aspect, the equipment and workers to other enterprises to engage in production, of course, is a more heartwarming thing, the other party gives the money equivalent to equipment depreciation and the cost of workers' working hours, the profits are all taken away by the other party, Teng Ji is equivalent to marrying others.

But since you can't receive orders yourself, it's better to marry others than to be idle for all the workers in the factory. Linyi machine can hire a group of workers, which is equivalent to reducing the burden on the factory. The rent paid by Linyi Machine is also an additional income in the factory, although the amount is not high, it is better than nothing.

When Zhou Heng mentioned this matter at the factory meeting, several other factory leaders had some criticisms. Since you can receive orders, and the product is also a milling machine that Teng Ji is better at, you should hand over the order directly to Teng Ji to produce, the big deal Teng Ji pays you a little information fee, and the bulk of the profit should be left to Teng Ji.

What can you do if your salesman is not strong, and he also goes out to run customers, and people can snatch the order from under your nose when they are on a machine, what can you say?

Customers are not fools, the reason why they are willing to sign an order with a machine, rather than signing an order with Teng machine, in addition to the difference in the ability of the two factory salesmen, people value more is that the machine has a more reliable quality and after-sales commitment, what problems are there in the future, find a machine to solve, far more solid than looking for a machine to be more down-to-earth. In the final analysis, Teng Ji himself has ruined his reputation, and the relationship with the salesman is really not too big.

In fact, the leaders of Tengji's factory also know this, but who wants to admit that they have a problem? The enterprise is not well managed, is it not good to throw the blame on others, self-reflection is really annoying.

It is said that Gao Shuchun was quite happy after receiving the notice that he was hired by Linyiji. Now Tengji's salary can barely be paid on time, but the salary standard is much lower than that of Linyiji. But to work for Linyiji, get the salary of Linyiji, work for a month, get more than twice the money than working in Tengji, this kind of opportunity, who doesn't want it?

There are thousands of parts on a gantry milling machine, which involves all the types of work of the Teng machine. Linyi machine to borrow the place and equipment of Tengji for production, it is naturally impossible to move all the equipment used to a workshop, not to mention, some equipment can not be moved at all, can only be produced in the original place. In this way, how the workers originally produced and how they still produce, but the person in charge of production scheduling has changed from the management personnel of Tengji to the management of Linyi Machine.

With Gao Shuchun's idea, he is the best miller in the workshop, and these gear processing on the gantry milling machine are also what he is used to doing in the past.

But something went wrong.

The business assigned to Gao Shuchun is to process several large gears in the gearbox of the machine tool. Gao Shuchun got the drawings, looked at the parameters, and began to work. He clamped the blank of the workpiece with his hands and feet, installed the appropriate milling cutter, slightly matched the feed point, then started the machine tool, and began to cut it with a squeak.

In Gao Shuchun's heart, there is an idea that is not humane to outsiders, that is, to show his hand in front of the dispatch of the first machine. He did this, not to please the scheduling of Linyi machine, nor for any other personal interests, he just wanted to let these southern Yankees see, although Teng Ji's business is not very good, but the tiger is old and heroic, Teng Ji's workers' technology is not to be underestimated, your uncle will always be your uncle......

"Hey, this master, why didn't you change the knife?"

A voice sounded behind Gao Shuchun, with a strong southern accent, and even the dissatisfaction that could not be concealed with an accent.

Gao Shuchun did not panic, he first completed the operation he was doing, retreated the milling cutter from the surface of the workpiece, and then turned around and looked at the person standing behind him. This person Gao Shuchun is acquainted, Wen Jianmin has introduced them to them before, it is the production dispatcher sent by Linyiji, named Chen Jinsong.

When they met, Chen Jinsong once introduced himself to everyone, saying that he was also a miller. He didn't say how old he was, but judging from his face, he looked less than 30 years old, at least 10 years younger than Gao Shuchun. Gao Shuchun is confident enough to think that his milling skills are enough for Chen Jinsong to be a master.

"What are you talking about changing knives?" Gao Shuchun looked at Chen Jinsong and asked casually. It's a master's way of speaking to a rookie, and the more you act nonchalant, the more you'll show that you're confident.

"According to the process requirements, after you use a three-sided blade cutter to mill this step surface, you need to change the single-angle cutter to mill the two angle grooves, why didn't you change the cutter and go to mill the right-angle groove first?" Chen Jinsong pointed to the drawing placed aside and said.

Gao Shuchun smiled slightly, and said: "Chen Dispatch, you haven't been a milling worker for a long time, right? I'll teach you a hand, you see, this step surface and this right-angle groove are all using this three-sided knife, I first mill the right-angle groove, and then change the tool to mill the angle groove over there, so that you can change the tool less once."

"You're also a dry miller, so you should know how much time it takes to change the tool, right? I'll finish all the operations with this knife first, and then change the next knife to process one of these gears, which can save at least one-third of the time. ”

"I get that. Chen Jinsong nodded, "But the process document says that you have to mill the angle groove first, and then mill the right-angle groove, and you have to do it in strict accordance with the requirements of the process document." ”

Gao Shuchun said disdainfully: "The people who are engaged in craftsmanship have never worked at all, and if you listen to them, you are blindly delaying your work." Anyway, the angle groove has to be milled, and the right-angle groove has to be milled, who comes first and who comes last, is there any difference? I've been a milling worker for almost 20 years, just such a broken gear, what process documents do I still need to read?"

Chen Jinsong said with a dark face: "This master, although I don't understand which place to process first and which place to process later, I believe that the process is particular, and they will not let you change it more for no reason."

"By the way, when I was in technical school, I heard from my teacher that the material of some workpieces is soft, and the surface is easy to deform during processing, so it is necessary to set aside some time for the surface to recover. I wondered if the process of stipulating the processing sequence of each part was just to allow time to recover the deformation. If we violate the process requirements, the accuracy of the part will be affected. We don't know what the specific process design idea is, so it is best to do it according to the requirements of the process document. ”

"You're talking about the technical school, which you can't eat in a factory. We have been building milling machines for decades, myself, and my master, and my master's master, all do this, you go to the market to inquire, our Teng machine's milling machine accuracy is not good?" Gao Shuchun choked.

Chen Jinsong is obviously not good at quarreling, and in terms of milling skills, he is indeed not Gao Shuchun's opponent. Teng machine is specialized in manufacturing milling machines, the quality of Teng machine's milling machine is one of the best in the industry, Gao Shuchun said that Teng machine has been produced like this for decades, so that Chen Jinsong really has nothing to refute.

However, Chen Jinsong has his own principles, that is, the requirements on the process documents must be strictly implemented, which is also the production discipline that Linyi has been emphasizing in recent years. In the past, there were some workers who didn't care much about the process documents, and felt that as long as the parts they processed were completely consistent with the requirements on the drawings, why did you care how I made them.

But in fact, the requirements on the process documents are often based on the theoretical derivation and the summary of countless experiences, some of the requirements seem to be red tape, but according to the production of better quality parts, contrary to the process requirements, even if the parts are exactly the same size on the surface, finish, etc., the internal quality indicators are not up to the requirements.

It is unrealistic to explain the theoretical basis behind the process documents to all workers, so the rule in the workshop is to do everything in strict accordance with the process documents. You think there's a better way to make a rationalization suggestion to the technical department. If the technical department accepts, your approach becomes the new process requirement. If the technical department does not approve your method, then you can only obediently follow the requirements of the technical department, and you can't modify the process design casually.

"This master, I don't care how many years of milling machine Teng Ji has done in the past, since you are now accepting the production task of Linyi machine, then you must do it in accordance with the regulations of Linyi machine. The gear you just processed does not meet the requirements, I will go back to our technician to take a look, if he says it can still be used, then stay. If he says no, it will be treated as scrap and your wages will be deducted according to the regulations. Chen Jinsong said solemnly.

(End of chapter)