Unconsciously, the year 2000 came, and in this millennium, with the arrival of the spring season, the business of the store gradually returned to normal, and the hardware market began to stabilize.

During this period, Diankou boldly explored the market, developed CNC lathes, and increased investment in research and development of automatic lathes, which made Diankou walk out of an unusual road in the cracks.

In cooperation with Kaida CNC lathe company, we have developed a popular CNC lathe, which solves the problem of operating CNC, so that most people will do CNC, and the CNC operation platform is much easier. After having CNC, Diankou opened up the market, went to Europe to look for business opportunities, and got bulk orders, so that some enterprises survived the difficulties. With the emergence of automatic lathes, Diankou has long thought of being one step ahead, and Guali automatic lathe factory joint venture, the production of eye-catching tapping products of the lathe, which has added a new kinetic energy to the small hardware of the store, the rise of automatic lathes, so that part of the living space of CNC lathes has become narrow.

As long as a master looks at it without accidents, often inspect the size of the product, in general, as long as someone adds good material to the funnel for it, it can be automatically produced, a person can manage more than six lathes, so as to save the wages of five workers, in addition to this, its advantage is more than three times that of manual production, and the products made are unattainable by artificial, its error value is very little, almost similar to the CNC production value, and CNC at most one person manages two, the number of production is about one-third of the automatic lathe。 Fundamentally, the future market share will be significantly more than CNC lathes, once the automatic lathe octagonal and hexagonal products are produced, then the automatic lathe will occupy a dominant position, as long as the automatic lathe once the market is obtained, it will be used in large quantities, then the workers will be greatly reduced, at least more than 65% of the handicraftsmen will lose their jobs.

Science is progressive, it doesn't consider whether you are unemployed or not, but considers its own value, embodied there.

There are many large enterprises in the store that have used Guali automatic lathes, and they all said that they were good, and then Yongkang, Cixi, Yuyao, In the end, even Yiwu automatic lathes also used Guali automatic lathes, which made Yiwu automatic lathe factory surprised, always advertised how their automatic lathes were, the result made people take the lead, in turn to seize their market is not counted, turned to sell the products to their doorstep, at this time they regretted to ask for a hundred million investment, but there is no regret in the world to sell medicine, regret what can be.

When they found that Guali automatic lathes can also tap threads, they were dumbfounded, no wonder their automatic lathe sales have plummeted in recent times, it turns out that someone has a better lathe out, the price is lower than theirs 5,000, but the machine tool function is much better.

Under the mediation of Secretary Mo, Yongkang also joined the development of automatic lathes in the industry, Kaida CNC lathes have advanced technical talents in the research of lathes, plus the diankou research team and Guan Xiaowei research team, the three teams together focus on CNC bandwidth topics. After Han Sanjiang reported the situation to Secretary Li of the Provincial Party Committee, Li Kaiyuan immediately reported the problem to the Ministry of Technology, which attracted the attention of the central leaders and demanded that a professional scientific research team be sent to Zhuji to study this breakthrough technology.

This technology later became a national high-tech industry, the forefront of intelligent development, and more than ten years later, it became a pioneer of intelligent development.

As long as the research and development project attracts the attention of the state, then the difficult thing will be easy to solve, the country has invested a large number of researchers to join the research team, and injected a lot of funds to develop this technology, after two years of unremitting efforts, finally broke through the technical bottleneck.

The previous bandwidth has become a pulse signal generator, and a pulse signal receiver is installed at the other end of the product, as long as the signal wave is docked, the fixed signal is at an angle, and the docking signal can find the corresponding signal, and the docking signal can be well docked successfully. The error number is in the range of 0·001, which can be said to be quite accurate.

Guan Xiaowei's automatic lathe factory business is booming, all of a sudden it has become the sweet and sweet of Zhejiang hardware industry, due to the development needs, the headquarters moved to Xiaoshan Economic Development Zone, and later in Dongguan, Guangdong, Shenzhen and other places also have branches, in Dongguan, Guangdong, Shenzhen is used to do machine assembly, mechanical panel synthesis, automatic cutting and other functions. Guali Automatic Lathe was renamed Guan Wei Automatic Lathe Co., Ltd., and later became Guan Wei Automatic CNC Lathe Group.

Benefiting from it are Kaida CNC automatic lathe group company, Kaida CNC automatic lathe group, according to the needs of customers, research to make customers satisfied with professional machines, in addition to doing a variety of automatic assembly work, but also the production of small hardware, profile cutting synthesis and other processes.

There are also several new CNC automatic lathe factories in Diankou, but the goal of the automatic lathe in Diankou is the production of small hardware, so it is widely used in the field of small hardware.

Yongkang also emerged several CNC automatic lathe factories, which also benefited from the cooperation with Kaida Group, Yongkang sent out the research team, did not disappoint Han Sanjiang, although their Yongkang CNC automatic lathes are not dedicated to small hardware, they do iron doors, do mechanical panels, do auto parts, assemble machines, etc., play an irreplaceable role.

Mo Wenquan never imagined that the plan he proposed would change the pattern of the whole China and make automated production the main direction of China's future development.

At that time, Mok Wenquan only knew that the automatic lathe was too simple, and it needed to be changed to make it have multiple functions, so as to reflect its values and the efficiency of the automatic lathe itself.

Seeing that the automatic lathe can produce polygonal products, Mo Wenquan suddenly danced with joy, looking at the newly researched automatic lathe, he was so excited that he couldn't speak. This automatic lathe research involved in too many people, poured the greatest effort, but also the most perfect lathe, it overcomes the obstacle of using the zeni head, realizes a new field of using the pulse generator to determine the direction, the medical field of technology to the industry, through the pulse signal square wave combination, link the corresponding point, so that the automatic lathe to the ideal level.

When I saw the robot hand stretching out the robot arm, opening the free mouth, and grabbing the octagonal product on the conveyor belt, the pulser behind it moved slowly with the free mouth, only to see the chuck on the spindle after stopping, emitting a blue light, aiming at the pulse signal generator, the pulse generator slowly rotated to the point that coincided with the blue light, and also emitted a blue light, and the two blue lights were docked, sending out a "tick" The sound of the other party's signal docking is correct, and then the mechanical arm sends the material into the chuck, the blue light in the chuck is blocked, the signal square wave is lost, the pulse signal program is actively exited, and the work instruction is entered, the motor spindle rotates, and then the production is carried out according to the CNC programming.

After the production is completed, the spindle stops, the chuck unlocking program is opened, the thimble in the chuck ejects the finished product, and falls into the docking barrel under the lathe, and the docking barrel takes over the product, and automatically conveys it to the product box.

This was the most ideal automatic lathe at that time, which caused a lot of sensation in the industry.