Without encountering any obstacles, Jiang Bo calmly left the 42 Hospital, sat in the car he rented before, and called up the system screen.

[Congratulations on completing the quest and getting 500 points and Smith's bounty]

With the addition of these 500 points, Jiang Bo's existing total number of points directly exceeded 5,000 points and came to 5,240 points.

[Smith's Bounty]: Here is the address of the warehouse in the port of Bangkok, the key, two verification passwords, and the contact information of the purchaser of lithography technology equipment of Unigroup Group, through these things, you can get a lithography machine worth 500 million+ and sell it.

"Was it a lithography machine...... A lithography machine worth 500 million+, is it ASML's extreme ultraviolet lithography machine?" Jiang Bo muttered, and couldn't help but be overjoyed.

Although Jiang Bo does not have a deep understanding of lithography machines, he still knows the basic principles and uses.

The lithography machine involves the manufacture of chip integrated circuits and is one of the representatives of world-class ultra-high-precision industrial technology.

At present, in the global lithography machine market, the top one can buy lithography machines for five or six billion, and only ASML is the company.

Like Samsung, Intel and TSMC, they are all customers of ASML, and the lithography machine produced by ASML is also the top in the world, and there is no one.

The mobile phones on the market now, such as Huawei, Apple, Samsung, Xiaomi, and OV, are basically made by ASML's lithography machines.

Because of the good quality and strong technology, ASML's lithography machines have been in short supply in the market, and the sales volume is very good.

Countless domestic enterprises want such a lithography machine, but it is difficult to find it.

One is because of the lack of goods, and the other is because of the international embargo.

As long as Jiang Bo can get an ASML lithography machine and let it out, those domestic chip foundries will definitely rush to it.

Without much reverie, after Jiang Bo turned off the system, he quickly drove away.

He didn't plan to go to the warehouse in the port of Bangkok right now, it was already late, and he wasn't in a hurry, there were some things that he would talk about tomorrow.

When he returned to the hotel and found that Ma Jingping was still there, Jiang Bo sighed slightly.

Ma Jingping was in charge of the surveillance, and Jiang Bo felt that he probably knew what he was doing in the hospital.

Jiang Bo didn't wear it, but just transferred the last [Secret Contract] from the inventory, wrote the relevant terms of the agreement with his mind, and put it in front of Ma Jingping.

"Boss Jiang, what is this?" Ma Jingping looked at and said in surprise.

Jiang Bo smiled and said, "Come on, press your handprint on your name." ”

Ma Jingping also smiled slightly when he heard this, and then almost without hesitation, after taking the ultra-thin golden electronic paper, he pressed his handprint on it.

Not to mention that he saw a lot of things that he shouldn't have seen today, he couldn't refuse the treatment Jiang Bo had offered before.

Going to work in a regular company, with an annual salary of one million, and a bright future in the future, this is something he never dreamed of in the past few years, because his identity is too bad.

And now, there is such an excellent opportunity in front of him, and he will only not grasp it if his brain is in water.

Press the handprint, the [Secret Contract] took effect, and Ma Jingping became Jiang Bo's third contractor after Hou Xu and Xu Bin.

......

The next morning.

Jiang Bo drove to the port of Bangkok, and according to the address, he quickly found the warehouse.

Using the key and the double password, Jiang Bo successfully entered the warehouse.

Turning on the switch in the room, the dazzling light emitted by dozens of lamps illuminates the entire warehouse.

It is a sealed warehouse of 500 square meters, with only vents and doors, and no windows.

The warehouse looked empty, with nothing but a rectangular item the size of a pickup truck on the left side of the clearing, which was covered with a blue tarpaulin.

It took Jiang Bo a few minutes to remove all the blue tarpaulins, revealing the rectangular object to its original appearance.

This is a large off-white lithography machine with the ASML logo printed on it.

However, from the surface alone, Jiang Bo couldn't see the model of this lithography machine, so he took out his mobile phone, took a few photos, and then sent the code to Ma Jingping, asking him to check what model of lithography machine this is.

A few minutes later, Ma Jingping sent a message: "Boss, this equipment is an EUV lithography machine from ASML, model: TwinsXe: 3400C.

The basic parameters of the TwinsXe:3400B I found here are about 800 million RMB, and the 12-inch wafer engraving efficiency per hour is 155 pieces.

But this TwinsXe:3400C, which is an enhanced version of the previous model, is equipped with a 340W light source from Cymer, and the wafer engraving efficiency per hour has been increased to 170 pieces, and the price has not been found......

However, according to the information disclosed by ASML, the price of this model of lithography machine should be higher. ”

After reading the message sent by Ma Jingping, Jiang Bo already had a conclusion in his heart.

The system's valuation of the lithography machine is 500 million+, but after many previous experiences, Jiang Bo has reason to believe that the actual price of the lithography machine can be increased by several percent or even doubled in the system valuation.

Judging from the information found by Ma Jingping, the price of the lithography machine of 3400B has reached 800 million, and the performance and production capacity of this 3400C are even better, I am afraid it can sell for 900 million, or even more, right?

"I don't want 900 million or more, as long as I can sell 800 million, I'm content. Jiang Bo grinned slightly.

I thought it was only five or six hundred million in compensation, but now it seems that it is much more than that.

No one will dislike that they have a lot of money, especially for a person like Jiang Bo who needs money to lose.

To sell the lithography machine, Jiang Bo plans to sell it here in Bangkok, and even the location of the lithography machine, Jiang Bo doesn't want to move, so he puts it here, and when the transaction is completed, let the buyer's people move it slowly.

As for smuggling it back yourself, and then producing chips yourself, that's.

Not to mention that if you are caught, you will be fined or your equipment will be confiscated.

Let's just say that this IC manufacturing, even if Jiang Bo has a lithography machine, he can't touch it.

Because there are too many ways involved in IC manufacturing and the threshold is too high, the equipment required for chips from lithography to packaging is not only lithography machines.

There are also etching machines, ion implanters, single crystal furnaces, chemical vapor deposition systems, probe test benches and many other kinds of equipment.

Even if you are lucky enough to make a chip, can you sell it?

Probably can't be sold, the quality of the chip is high or low, before the chip is made, the IC design, the logic drawings and technology about the integrated circuit, belong to the cutting-edge technology of the giants of Inter, Samsung, Huawei and Apple.

The reason why other people's chips are high-end is because the IC design is done well, and the logic of the integrated circuit has reached the level of several nanometers.

And if you want to do this well, look at Huawei, it took twenty or thirty years of hard work and invested an unknown amount of resources to barely catch up.

Therefore, in Jiangbo's current situation of no technology, no talent and no background, it is better to sell the lithography machine honestly and take some money to continue to spend money on fishing for treasures.

Chip ...... He had never thought of such a high-end thing at all, because it was unrealistic.

"But who should I sell it to?" Jiang Bo muttered as his eyes swept over the lithography machine in front of him, his fingers twisting his chin.

He only knows that the domestic demand for this kind of high-end lithography machine is very large, but he is not very clear about which companies they are.

With a thought, Jiang Bo thought of something and hurriedly took out an item from the inventory: [Contact information of the purchaser of lithography technology equipment of Ziguang Group]

"Do you want to contact someone from Unigroup?"

......