25. Debugging semi-finished products
That night, Ding Sheng worked in the laboratory until more than ten o'clock before returning home.
tiptoed into the house, or was caught by Ding's mother who was watching a soap opera, fortunately, the next two days were rest, she knew that it was necessary to properly relax the management of her son, otherwise Ding Sheng would be greeted by a Hedong lion's roar, "What are you carrying in a big bag?"
"Books, the school has to sort them out as an examination room, and all the books have to be taken away today. Ding Sheng's ability to talk nonsense with his eyes open is really getting more and more proficient.
Today is the last day of school, yes, the school has to take all the books in the examination room, but after his books leave the school, they will be sold to the scrap station for eight cents a pound.
Ding Sheng's schoolbag now contains several bottles of freshly diluted Super Serum 2.0 and two sets of new polymer batteries, pushers and induction devices.
The next day, the suburban mold factory.
The boss of the factory has also fought recently, from the purchase of steel to the start of casting, he has worked overtime all the way to make half a set of armor, and two of the arms have been finished products.
Ding Sheng rushed over early in the morning just to debug the equipment.
"Little brother, I've never seen such a delicate and complex mechanical equipment, and I have to say that your suit is too well designed. ”
And these drawings are not tired to read, and the boss can't help but stretch out his thumb when he is busy!
"Boss, you are also very good, you have restored these line buckles on my drawings perfectly, and I can assemble them very easily. Ding Sheng was assembling the robotic arm while turning on the commercial mutual blowing mode.
But there is a sentence to say, the basic skills of this boss casting mold are really remarkable, and the parts that have been formed so far are perfectly restored to the drawings, and every seam and buckle can be installed together airtightly.
This sense of regularity is really a bit of a science fiction movie at first glance.
Ding Sheng embedded the battery and propulsion device in the reserved position of the robotic arm for the first step of debugging.
"Guan Ju, turn on 5% power. ”
The command in his mind was transmitted, and the mechanical arm rushed out of the table with a "bang", and after hitting a metal baffle, it began to shake wildly.
Ding Sheng's face was happy, "Push it up, and the power will be raised to 10%. ”
With the help of the group of miniature propulsion aids around the arm, the mechanical arm instantly stood up straight and flew upwards in a swaying manner.
"Wow, little brother, you can really take off!" Seeing such a scene, the eyes of the owner of the mold factory widened.
From the drawings of the mechanical armor, the boss thought that these reserved positions might be some power units, and he was skeptical about this, but this thing was really flying in front of his eyes now, and it felt like seeing the person in the painting come to life.
It's so unreal.
"Take your current position as a starting point and make a circular flight with a diameter of 10 meters. ”
After estimating the space of the factory, Ding Sheng gave another order.
The robotic arm did the same, but the speed was very slow, and it could even be said to be crumbling, after all, only 10% of the power was distributed, and a part of it had to be divided into centripetal force, and the power was even more insufficient.
"Guan Ju, the power is fully turned on, test the top speed!" was too lazy to slowly increase the power, Ding Sheng directly ordered the control system to push the speed of the propulsion device to the limit.
Rumble!
All the kinetic energy of the new polymer battery is released, and the robotic arm is firing at full power, pulling a wave of air visible to the naked eye in the air......
"The current battery is 88%..."
"The current battery is 52%..."
"The current power is 16%... Low battery warning!"
"The current battery is depleted..."
As soon as the mechanical arm entered the high-speed flight mode, Guan Ju began to prompt the battery level non-stop, and in less than five seconds, the power was GG.
The mechanical arm that had no electrical energy to provide kinetic energy fell heavily to the ground, and when I picked it up, the quality of the steel was quite good, and it was not deformed.
"What's the maximum speed?"
Ding Sheng is more concerned about this issue, although the steel armor shell this time is relatively copycat, and the battery is also very cheating, but this set of propulsion devices has been concocted by him with a lot of effort, and it should not lag behind in terms of speed.
“240.33M/S。 Guan Ju replied.
That's more than 800 kilometers per hour?
This fully met Ding Sheng's expectations, but unfortunately the peak speed could only be maintained for five seconds.
It's okay, it's a lot stronger than a real man in three seconds.
In the future, don't turn on all the firepower at every turn, it should be able to make do.
The limit of a polymer battery of this volume is almost like this, and if you want to make a qualitative breakthrough in the future, you have to lean on the Ark nuclear reactor.
Glancing at the mobile phone, it is almost time to go to the Big Buddha Temple, and the mold factory is also in the south of the city, about two or three miles in the past, not far.
Plugging the two mechanical arms into the speed charger, and then taking out a simple bracelet from the backpack and putting it on, Ding Sheng began to walk out, "Guan Ju, conduct a sensor device test." ”
Walk fifty meters.
"The inductive signal is stable. ”
One hundred meters.
"The signal is stable..."
Five hundred meters, that is, one mile away
"The signal is stable..."
A little further, Guan Ju began to indicate that the signal was unstable, and at most 600 meters, the signal was completely lost.
Because of the limited materials in his hand, Ding Sheng had already made the best use of the induction device, although the effective distance of 500 meters was not satisfactory, but he did his best.
Next time, it's no problem to buy some good materials and make a super sensor device, so there's no need to worry about it.
After Ding Sheng finished testing the sensing distance, Chen Xu's phone called, "Meng Xiao and I have already met, what about you?"
"Wait for me at the gate of the Big Buddha Temple, I'll be there right away. After Ding Sheng finished speaking, he ran forward.
......
Today's Big Buddha Temple is crowded with people, as if half of the students from the only two high schools in the neighboring county have come.
Feudal superstition is unacceptable, don't these people know?
Ding Sheng saw Meng Xiao from a distance, wearing a white shirt and a ponytail, tall, next to his roommate Lu Yao, and next to him was Chen Xu.
"If there's no one in the group, let's go in. Ding Sheng greeted them one by one and prepared to enter the temple.
"There were too many people today, we came too late, and we had to get the number in line. Chen Xu said, waving the small note in his hand.
Take a closer look: 125
"There are 125 people in front of us?"
Ding Sheng knew that most of the people here did not come to seek the Buddha because of superstition, but because they wanted to have peace of mind, and the rest of the people were just joining in the fun.
"No, this number means that we are in the 125th group, and as for how many people there are, it's hard to say. ”
As soon as Chen Xu's words fell, he heard a girl not far away calling, "There are twenty of you left, hurry up, you will be in line." ”
"Host, we still have fifteen people who haven't arrived, can the number be extended?"
"There are only nine of us in this group, can we be accommodating and go in first?"
"Why, there are only seven of us waiting. ”
Just?
The four of them looked at each other, crying and laughing, and it seemed more like all the senior students from the two middle schools had come.