This speed!

This efficiency!

It's just ......

Click, click, click......

The stamping of the terminal head is very rhythmic, and every stamping action, there is a terminal head that is stamped into shape, and automatically ejects from the stamping die gently, and gently rolls down into the wooden box next to the terminal.

How did it be stamped before?

Although it is also a one-time stamping form, it is completely manual, and the stamping worker needs to put the blank into the stamping die, and after the stamping is completed, the terminal head must be taken out.

Now it's fully automated.

The strong contrast between manual and automatic made everyone stunned, and the expression suddenly froze on the face, only the stamping sound of "click, click" sounded, and after a few seconds, someone finally reflected and exclaimed loudly!

"Oh my God, I read that right, I can't believe it's so fast!"

"That's too fast!"

Xiao Liu was even more excited and said: "Boss, this is our new mold, this stamping speed is at least three times more than the previous one, I can't believe it!"

Tang Fei said happily: "Xiao Liu, from now on, you will be much easier, you don't need to operate manually one by one, but realize the automation of stamping." ”

"Hmm. Xiao Liu nodded vigorously with joy.

The upgraded version of the automatic stamping die finally has the first set, Tang Fei thought about it, use it for a few days, it must have some small problems, it will be exposed in the process of use, targeted improvement and perfection, and then, and then do the second set, or even the third set of such stamping dies.

For such a good stamping die, there must be at least a few sets.

In the future, the production of its own terminals will be fully automated, and there will be no need to manually stamping one by one, which is too low in stamping efficiency.

If other suppliers know that Tang Fei suspects the low efficiency of one-time stamping, it is estimated that he will jump up and say with tears in his eyes, we not only stamping one by one, but also several stamping processes to complete a terminal.

Other suppliers who do the terminal are all traditional processes, low efficiency, poor quality, Tang Fei naturally does not look down on their kind of production process, in Tang Fei here, will all use automatic stamping and forming, the efficiency is several times that of those suppliers.

The first set of automated stamping dies was put into use, and the stamping efficiency began to be impressive, and the first type of terminal head produced today was quickly produced, a total of 2,000 pieces.

This saved a lot of time compared to usual, and it only took more than an hour. Seeing that a total of 2,000 stamping was completed, Tang Fei said loudly: "Change the stamping module, and we will carry out the stamping of the second type of terminal." ”

"Boss, I'll change it right away. ”

Xiao Liu, the worker in charge of stamping, seemed to be more excited than Tang Fei, and immediately began to talk about the stamping module of the stamping die to be removed and replaced with another stamping module required for the terminal.

This set of stamping dies, in fact, is a stamping platform, which is fully modular, easy to replace, and very fast.

It didn't take long for the rhythmic sound to sound again, click, click, click......

The terminals of another model began to be stamped again, and one by one they were stamped into shape......

Red Star Factory, final assembly workshop.

Lu Gang, the vice president in charge of the production process, was in a bad mood, the terminal head of a certain model was in an emergency, and the problem was still in his own employees, and he couldn't blame others.

A few days ago, the planner noticed that something was wrong, the most used terminal was always missing, and this was not right!

The planner was confused and full of wonder.

This kind of terminal head has a full purchase plan and full purchase, and there should be no shortage of stock, but it is actually out of stock.

The day before yesterday it was out of stock, and the procurement planner immediately asked one of the suppliers to deliver 5,000 pieces, but fortunately, the supplier still had a certain amount of inventory, and also sent the 5,000 terminals in time.

Only two days later, the 5,000 terminals were sold out, because the amount of this kind of terminal is very large, and a variety of models have to use it, and it is normal for the Red Star Factory to consume thousands of them every day, and when it is used more, it will consume tens of thousands of them every day.

When it ran out again, the procurement planner had to call again and ask the following suppliers to deliver the goods immediately, but the problem was that the suppliers did not have so much inventory and could not send tens of thousands of these terminals at one time.

If this kind of terminal is not available, it will be a big problem, because it is the largest use, and it will be used in many models, and once it is missing, it will immediately affect many models that are being assembled.

The purchaser planner didn't dare to hide it, and immediately reported the problem, and finally went to Lu Gang, and when he heard that it was the largest amount of terminals, many models would be used, and Lu Gang was also anxious.

On the one hand, I personally notified the suppliers who did the terminals to deliver the goods, and on the other hand, I immediately checked the reason, what the hell is going on.

The reason was finally found out, there was a problem with the quota, and each car of a certain model needed 3,000 pieces, and the result was that one zero was written less and 300 were written.

The problem lies in the quota of the assembly workshop, which belongs to the assembly workshop's own problem, Lu Gang was a little anxious, and hurriedly asked Chen Guihong for help, no, he personally went to Chen Guihong's office and asked for help.

"Mr. Chen, that's the way it is, because the quota is wrong, and the terminal of this model is currently seriously insufficient. ”

After listening, Chen Guihongye frowned slightly, fully aware of the seriousness of the matter. After thinking about it, he asked with a straight face: "Mr. Lu, how many of these terminals do you need?"

Lu Gang said: "At present, a variety of models need to use this kind of connector, and it is best to purchase 100,000 as soon as possible, not 100,000, at least 80,000." ”

That's a lot of money.

Chen Guihong said: "The volume is too large, and no supplier can produce so many terminals in just a few days." ”

"Then what can we do, our production can't be stopped, and the Shaoshan No. 9 electric locomotive also needs to use this kind of terminal. ”

Shaoshan Type 9 should also be used.

Chen Guihong's face changed. Just a few days ago, Jinjiu Company made such a thing, which almost affected the ribbon cutting of the Shaoshan Type 9, but fortunately Tang Fei helped.

Now, there is such a thing again, once afraid of snake bites, ten years afraid of well ropes, Chen Guihong is worried that something will happen again, if the matter is big, and it reaches the ears of the leaders from above, it is not good.

There was really no way, Lu Gang gritted his teeth and said: "Otherwise, let's let those suppliers do their best to only make this kind of terminal and get through this difficulty." ”

Chen Guihong immediately denied it and shook his head gently, "Everyone is trying their best to only make this kind of terminal, which will inevitably affect the production of other types of terminals, which is inappropriate." ”

"Mr. Chen, what should I do then!" Lu Gang was as anxious as an ant on a hot pot.

Chen Guihong thought for a long time, and said slowly: "In this matter, you may have to ask Tang Fei for help, their terminals are formed by stamping at one time, which is very efficient, maybe there should be no problem to make thousands of such terminals every day." ”

A few thousand a day, maybe barely able to keep up.

Lu Gang could only nod helplessly, "It seems that this is the only way, let's try it with Tang Fei." ”

At this time, Tang Fei was in his own factory.

Automatic stamping is cool!

In just a few hours, Tang Fei has produced a total of three models and more than 5,000 terminals, and now, the fourth model of terminals is ready to be stamped.

Xiao Liu replaced the stamping module of this type of terminal, and after trying it, he said loudly: "Boss, there is no problem, it can be stamped." ”

Tang Fei said: "Let's try to punch a few first." ”

"Hmm. Xiao Liu nodded, operated this set of punches, stamped a few samples with a click, looked at the stamping situation, picked up the calipers and measured the relevant size, and said happily: "Boss, fully qualified." ”

Tang Fei said: "Then start stamping, first stamping 5,000." ”

This type of terminal is the largest in Hongxing Factory, and the number of orders is also relatively large, which is enough to require Tang Fei to make tens of thousands, such a large amount, then at least 5,000 first.

Click, click......

The sound of stamping with a very rhythmic sense sounded, and the terminals of this model were stamped and formed one by one, which made people happy when they looked at it, and Tang Fei was in a good mood.

At this time, two people came from outside Tang Fei's factory, wearing the work clothes of the Red Star Factory, and one of them still had an anxious look, saw the door of the Jiuzhou Locomotive Parts Factory, and looked inside hopefully.

………

Thank you all for your tips!

Thanks to the "Deceptive Saint Emperor" for the reward of 200 coins, thanks to the "First Brother of the Returning Sea", "HMHT", "Idle Child", "Maple Leaf... Red Beans", "★ Promises ★", and "Seeing People in the Lights" are each rewarded with 100 coins.