"Ahem" Shen Danqing coughed heavily twice, reminding everyone to show that he was paying attention to them.

In the end, Hong Tao had no choice but to stand up and say: "Boss, I have been exposed to it in the United States, although it is an outdated technology, it has never deviated. I think the principle will not change. ”

At the beginning, he officially explained:

"The lithography machine, also known as the mask alignment exposure machine, is a method that uses the principle of a camera to transfer the circuit diagram designed by an electronic engineer to a silicon wafer in multiple steps. The most difficult part of this is laser technology and mechanical control accuracy. But these two points have already been solved, I have to say, the boss is really high-minded!

Let me start by saying the importance of lasers. Generally, the laser used in lithography machines is ultraviolet light, and I only know about it since I came to the company. Ultraviolet light is also divided into grades, ordinary ultraviolet light is also called UV, its light wave amplitude is 365Nm, the second is called deep ultraviolet light, also called DUV, also known as excimer aurora, its light wave amplitude is reduced to 248Nm to 193Nm, which is the technology we invited the Institute of Optoelectronics of Tsinghua University to study as early as 92 years. There is also a kind of research that we have developed in order to improve the control accuracy of nano-level CNC machine tools, which we call extremely deep ultraviolet light and EUV, and its light wave amplitude is only 10 to 15Nm.

The smaller the amplitude of the light wave, the higher the lithography accuracy. The amplitude of the light wave is small, the energy density is large, and the laser can leave a clear pattern on the photoresist as long as it is irradiated once. So, I dare say that we have reached the world leader when it comes to laser technology.

The second focus, mechanical control technology, needless to say, we are already a world leader, and the mechanical accuracy has reached the nanometer level. And our mechanical control technology is completely different from foreign countries, under the guidance of the boss, we use non-contact electromagnetic control linear motor, fully realize the electrical signal control, the highest precision can reach 1 nanometer, this is because we only collect this level of data. As far as I know, foreign countries are still adopting pure mechanical control technology, and they are still keen on ball screws and air bearings and other technologies. The control accuracy is at least two orders of magnitude different from ours.

Therefore, there is no technical difficulty in developing a lithography machine. On the contrary, the development of ion implanters has many difficulties.

The ion implanter uses the principle of ion sputtering to dope the scribed transistors to achieve the electrical performance we need.

There are two technical difficulties here, the first is high temperature. High temperatures deform tiny transistors, so we need to find a way to cool them down. Second, the bombardment force of the ions, the force is too large, it is easy to cause damage to the transistor, the force is too small, and it cannot achieve the purpose of doping. ”

Speaking of which, he peeked at the boss to see if he was satisfied with his explanation, and found that everything was fine, so he made a concluding speech:

"That's all I have to say, and if there are any deficiencies, please add. Thank you!"

Hong Tao sat down after speaking, he was chasing ducks to the shelves, there was no way, who made him a doctor in the United States, and he had been exposed to this knowledge. If he keeps shrinking his head, the boss will also call him by name, so it is better to take the initiative and leave a good impression on the boss's heart.

Of course, no one spoke again, and this is not a beautiful difference. Shen Danqing waited for a few minutes, and when he saw that no one stood up to speak anymore, he began to speak: "Just now, Director Hong's speech was very insightful, and he basically pointed out all the important precautions, so I won't say more." I don't know as much as any of you here, but I have a few requests. The first is the yield rate, which is a hard indicator. The second is efficiency, which requires the ability to produce on a large scale. I expect that a large number of chips will be used in our country in the future, and we must be able to meet this demand quickly. From low-end 16-bit to mid-range 32-bit, and then to high-end 64-bit chips in the future, we have to be able to provide a large number of them.

In order to better improve your enthusiasm, I would like to give you a good news in advance. In the future, I plan to divide our group companies into three types of companies.

The third type is the company that produces products for the social group, and the characteristic of this type of company is that it needs to have social influence, that is, it needs to advertise.

The second category is the production of products for enterprises. Such as: machine tools, machinery, chips, parts, production lines and so on. Or virtualization products such as product design. The characteristic of this type of enterprise is that it produces parts and other necessary goods necessary for the third type of enterprise.

The first type of enterprise is the equipment or technology authorization necessary for the production of the second type of enterprise. It is at the top of the industrial food chain.

I plan to do so when I arrive in Changsha. You are allowed to set up a Category 1 and 2 business as a sole proprietorship or joint venture, and of course the joint venture is only an internal joint venture. We do not accept any foreign capital.

This chip production equipment can be regarded as your first joint venture. All participating units are counted as joint venture shareholders, and the specific proportion of shares is discussed by yourself, and then reported to me for approval and implementation.

So in fact, you are working hard for yourself, as for this set of equipment in the future, how much money should be bought, it is also up to you to set the price of similar equipment in the world, and then report to me for approval.

I have always been based on interests, and only interests can promote people's enthusiasm. Combined with the company's 30% corporate profit share, I expect that the future companies will be highly automated factories, especially the first type of enterprises and the second type of enterprises, or how many employees, that is, your future income will be greatly improved, everyone here is a billionaire is not a dream.

However, the head office will gradually reduce the expenditure on each research unit until it is fully covered by you.

When you start your company, the head office will give you an interest-free loan to repay in installments after you make a profit.

Do you agree with my idea?"

Shen Danqing asked them at the end of his speech. How do you know that his speech is like opening a Pandora's box. Everyone sitting below had their hearts boiling hot like boiling water. So they replied in unison: "Yes!"

Only Lu Rucheng looked at them with envy and hatred. Because they are companies in the first place, this policy is not effective for them. However, when he thought that his company would be a huge conglomerate with more than 200,000 employees in the future, he was balanced in his heart, thinking: No matter how you are, you can't catch up with me.

When Shen Danqing saw everyone's happy appearance, he couldn't help but feel a sense of pride in his heart. As long as I continue to improve their enthusiasm and vitality, my subordinates will naturally achieve my goal quickly and well.

After committing adultery, he gathered his mind and began to say again:

"Okay! Since everyone agrees with my idea, let's go and seriously complete this research and development task! But I want to pour cold water on everyone, you are only the chairman or director of all kinds of companies, you enjoy profit sharing. For specific management, you need to hire a professional to take on the role. After all, that's not your specialty, and it will take away your energy from researching technology. You have to remember that your root is technology. Other than that, you are not good at anything. ”

When Shen Danqing said this, he didn't say anything more, but looked at the subordinates below who were still excited. Then suddenly he stood up and said:

"That's all for today, adjournment. ”

After Shen Danqing finished speaking, he took the lead out of the conference room. After he left, the conference room was bustling with porridge. Everyone did not rush back, but discussed it on the spot.

"Director Hong, what kind of company do you plan to set up after moving to Changsha?" Wang Bo of the Institute of Chemistry gossiped first. He wanted to test the ideas of others first, so that he could base his own judgment in the future.

"We plan to set up an electronics company according to the boss's arrangement, according to the boss, it can be regarded as a second-class enterprise!" Of course, Hong Tao would not reveal the truth so early, he only talked about the enterprise that he had already established clearly, and said that he did not say anything.

Wang Bo couldn't help but feel depressed in his heart, I came to ask you on purpose, and you told me this. But he still took over and said: "The second type of enterprise is suitable for sole proprietorship and is the most convenient enterprise to establish. One type of enterprise is different, often requiring multiple joint ventures, which is difficult to coordinate. Besides, who is going to take the lead? I think! It's very difficult anyway, and I think only the boss can take the lead, otherwise no one will have this prestige. ”

"The same can't be said about some kind of enterprises. We also have to take the lead in creating, such as heavy machinery factories and ultra-precision machine tool factories, without which other enterprises would be built like castles in the air, and there is nowhere to start. Director Wang, what do you think?" Hong Tao was also interested, so he took over the conversation with great interest.

"Of course, but what you said seems to be related to us! Director Hong, you are not authentic! Come up with another kind of enterprise related to us. Wang Bo finally found the shortcomings in Hong Tao's words, so he used the excuse to provoke the conversation. He can be regarded as a bone in the egg! Hong Tao was inadvertently lying down and was shot.

"There are many enterprises related to you, chemistry is the mother of industry, except for pure mechanical enterprises, which line of work is inseparable from you, I see! Director Wang, you will establish the most second-class enterprises in the future, you are the biggest winner in life, and you have the courage to tell me, you are the first to win the idea!" In fact, Hong Tao also said in his heart that no matter which line of work is inseparable from them. It is true that the departure of modern enterprises from electronic technology means that they are left behind. In fact, he was the first to take the lead, and he was afraid that Director Wang would ask him again, so he led the fire to Director Wang first.

"Everybody's pretty much the same, all the same. Wang Bo just grinned and stopped picking up words. Actually, he thinks so too. Now that he is pointed out by Hong Tao, he is very proud.

……